• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.33-40
• /
• 2020

As hydrogen utilization becomes more active recently, a large amount of hydrogen should be supplied safely. Among the three supply methods, liquefied hydrogen, which is an optimal method of storage and transportation convenience and high safety, has a low temperature of -253℃, which is complicated by the liquefaction process and consumes a lot of electricity, resulting in high operating costs. In order to reduce the electrical energy required for liquefaction and to raise the efficiency, hydrogen is cooled by using a mixed refrigerant in a precooling step. The electricity required for the precooling process of the mixed refrigerant can be reduced by using the cold energy of LNG. Actually, LNG cold energy is used in refrigeration warehouse and air liquefaction separation process, and a lot of power reduction is achieved. The purpose of this study is to replace the electric power by using LNG cold energy instead of the electric air-cooler to lower the temperature of the hydrogen and refrigerant that are increased due to the compression in the hydrogen liquefaction process. The required energy was obtained by simulating mixed refrigerant (MR) hydrogen liquefaction system with LNG cold heat and electric system. In addition, the power replacement rate of the electric process were obtained with the pressure, the temperature of LNG, the rate of latent heat utilization, and the hydrogen liquefaction capacity, Therefore, optimization of the hydrogen liquefaction system using LNG cold energy was carried out.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.4
• /
• pp.381-388
• /
• 1984

Addition of heavy textured red earth is being recommended to improve the texture and nutirent retention capacity of sandy soil in Korea. However, farmers are not favorable to this description because of high transportation cost and hard working. To solve this pending problem a field experiment was carried out to investigate the possibility of application of Zeolite as a foreign earth material to improve the physical and chemical characteristics of sandy soil. The experiment results suggested that Zeolite mixed with the basal N fertilizer would be substituted for other foreign earth materials in aspects of rice yield and nitrogen uptake of rice shoot. On the other hand, ammonium adsorption characteristics of soil and amendments were studied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.393-398
• /
• 2005

Suspended fine mineral particles are deposited at the areas with low flow velocity and low transportation capacity in rivers, reservoirs and lakes. It can be contaminated by heavy metals. Examples of problem fields art dredging of sediment, water pollutants, and maintenance of navigation channels and construction works. To deal with the settling problems it is necessary to understand tile physico-chemical characteristics of cohesive sediment under varying density of particle and ion addition(NaOH, HCl, NaCl), which is dissolved in river, because fine-grained cohesive sediment can lead to flocculation with the physico-chemical influences and takes different characteristics. Experiments with fresh and saline water are followed with fine-grained sediments(alumina and quartz) in settling columns. Settling velocity of suspended fine particles in still water was measured with a pressure sensor(maximum 10 mbar). Until the initial concentration of 20,000 mg/1 of alumina and quartz the settling velocity was on the increase. Above this initial concentration was it on the decrease. In an acid condition, which causes strong flocculation, average settling velocity of quartz powder was high. In an alkaline water low average settling velocity of it was observed. However, alumina behaved exactly contrarily.

• Journal of Intelligence and Information Systems
• /
• v.13 no.3
• /
• pp.101-117
• /
• 2007

In this paper, we propose a customized genetic algorithm (GA) to find the minimum-cost guideway network (GN) of personal rapid transit (PRT) subject to connectivity, reliability, and traffic capacity constraints. PRT is a novel transportation concept, where a number of automated taxi-sized vehicles run on an elevated GN. One of the most important problems regarding PRT is how to design its GN topology for given station locations and the associated inter-station traffic demands. We model the GN as a directed graph, where its cost, connectivity, reliability, and node traffics are formulated. Based on this formulation, we develop the GA with special genetic operators well suited for the GN design problem. Such operators include steady state selection, repair algorithm, and directed mutation. We perform numerical experiments to determine the adequate GA parameters and compare its performance to other optimization algorithms previously reported. The experimental results verify the effectiveness and efficiency of the proposed approach for the GN design problem having up to 210 links.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.221-227
• /
• 2008

A vehicle routing problem with time constraint is one of the important problems in distribution and transportation. The service of a customer must start and finish within a given time interval. Our method is based on an improved operators of genetic algorithm and the objective is to minimize the cost of servicing the set of customers without being tardy or exceeding the capacity or travel time of the vehicles. This research shows that a proposed method based on the improved genetic search can obtain good solutions to vehicle routing problems with time constrained compared with a high degree of efficiency other heuristics. For the computational purpose, we developed a GUI-type computer program according to the proposed method and the computational results show that the proposed method is very effective on a set of standard test problems, and can be potentially useful in solving the vehicle routing problems.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.194-200
• /
• 2009

This study provides a heuristic algorithm to solve the locating problem of repair service centers (RSCs). To enhance the customer service level with more satisfaction and quicker responsiveness, the locating problem of RSCs has become one of the important issues in reverse supply chain management. This problem is formulated as a zero-one mixed integer programming in which an exiting distributor will be considered to be an un-capacitated repair service center for the objective of cost-minimizing. Since logistical costs are highly interrelated with the multinational location of distributors and RSCs, the fixed cost for setting a repair service center, variable cost, transportation cost, and exchange rates are considered in this study. Recognizing the selection of un-capacitated RSCs' locations is a combinatorial optimization problem and is a zero-one mixed integer programming with NP-hard complexity, we provide a heuristic algorithm named as incremental cost matrix procedure (ICMP) to simplify the solving procedure. By using the concise and structural cost matrix, ICMP can efficiently screen the potential location with cost advantage and effectively decide which distributor should be a RSC. Results obtained from the numerical experiments conducted in small scale problem have shown the fact that ICMP is an effective and efficient heuristic algorithm for solving the RSCs locating problem. In the future, using the extended ICMP to solve problems with larger industrial scale or problems with congestion effects caused by the variation of customer demand and the restriction of the RSC capacity is worth a further investigation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.5
• /
• pp.457-468
• /
• 2016

Traffic-related air pollutants and particulates from diesel exhaust cause for increasing respiratory health problem. Recent epidemiologic studies have reported adverse effects of urban air pollution on various aspects of respiratory health. Bus or truck terminal workers have high probability of exposure to diesel exhaust particle than general office worker. This study was designed to evaluate the relationship between pulmonary function of people who working at the high-density area of diesel vehicles and pulmonary function of people who working at general office in Seoul. So, this study explored the effects on people with exposure to diesel traffic or exposure to diesel traffic, through the pulmonary function test (PFT). There were significant difference in Forced Vital Capacity (FVC) and Forced Expiratory Volume in 1 second ($FEV_1$) between high-exposure group and control. High-exposure to diesel particle were increased risk of reduction in pulmonary function in this study. These results provide the necessity additional research that manage people who working at the high-density area of diesel vehicles.

• Steel and Composite Structures
• /
• v.29 no.1
• /
• pp.1-22
• /
• 2018

Multi-storey precast concrete skeletal structures are assembled from individual prefabricated components which are erected on-site using various types of connections. In the current design of these structures, beam-to-column connections are assumed to be pin jointed. Welded plate beam to-column connections have been used in the precast concrete industry for many years. They have many advantages over other jointing methods in component production, quality control, transportation and assembly. However, there is at present limited information concerning their detailed structural behaviour under bending and shear loadings. The experimental work has involved the determination of moment-rotation relationships for semi-rigid precast concrete connections in full scale connection tests. The study reported in this paper was undertaken to clarify the behaviour of such connections under symmetrical vertical loadings. A series of full-scale tests was performed on sample column for which the column geometry and weld arrangements conformed with successful commercial practice. Proprietary hollow core slabs were tied to the beams by tensile reinforcing bars, which also provide the in-plane continuity across the connections. The strength of the connections in the double sided tests was at least 0.84 times the predicted moment of resistance of the composite beam and slab. The secant stiffness of the connections ranged from 0.7 to 3.9 times the flexural stiffness of the attached beam. When the connections were tested without the floor slabs and tie steel, the reduced strength and stiffness were approximately a third and half respectively. This remarkable contribution of the floor strength and stiffness to the flexural capacity of the joint is currently neglected in the design process for precast concrete frames. In general, the double sided connections were found to be more suited to a semi-rigid design approach than the single sided ones. The behaviour of double sided welded plate connection test results are presented in this paper. The behaviour of single sided welded plate connection test results is the subject of another paper.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.6
• /
• pp.820-827
• /
• 2015

The present study was performed to investigate the various radical scavenging activities of fermented Undaria pinnatifida by the mycelia fermentation method. U. pinnatifida was fermented with Cordyceps militaris (C. militaris ) mycelia using solid culture and compared with unfermentated U. pinnatifida and C. militaris mycelia for antioxidant activities. The various radical scavenging activities of extracts from U. pinnatifida fermented with C. militaris mycelia (FUCM) were evaluated by electron spin resonance. The antioxidant activities of the FUCM extracts were assayed for ferric reducing antioxidant power, 2,2'-azinobis-(3-ethybenzothiazoline-6-sulfonic acid) radical scavenging activity, and oxygen radical absorption capacity. The free radical scavenging activity of FUCM extracts was higher than that of C. militaris mycelia or U. pinnatifida alone. FUCM extracts were significantly (p < 0.05) increased up to 35 times, 10 times, and 16 times that of U. pinnatifida extracts on DPPH, alkyl, and hydroxyl radical scavenging activities, respectively. These results indicate that FUCM extracts have different chemical ingredients from U. pinnatifida and could provide beneficial antioxidant activity.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.252-257
• /
• 2016

In this paper a novel access scheme for uplink multiuser transmission based on IEEE 802.11ax random access in in-aircraft wireless sensor networks is proposed. The proposed scheme provides an efficient access control mechanism with three divisions of OFDMA backoff counter (OBO): access, deferring, dropping, which controls the number of potential uplink transmission stations. The proposed scheme can be used efficiently in in-aircraft wireless sensor network where a large number of sensors need to be supported. By using the proposed scheme, since in-aircraft sensors attempt channel access using the proposed differentiated OBO parameters, the number of stations exceeds the access capacity can be efficiently controlled. This paper also provides the mathematical analysis of the proposed scheme, regarding the optimal parameters. According to the performance analysis, the proposed scheme is able to efficiently control the access behavior of wireless sensors in the network.