• 대한교통학회지
• /
• 제14권2호
• /
• pp.7-29
• /
• 1996

Traffic flow characteristics is analysed on eight multi-lane roads which are unsignalized in urban areas. Data of traffic flow rates by classification and average speed were gathered every ten minutes interval for twenty-four hours. Machine (NC-90A) was used to acquire the field data. The major purpose of this study is to build up speed-density models on urban arterial roads. Five different kinds of models were tested. Those models are Greenshields' model, Greenberg's model, modified Greenberg's model, Underwood's model and Drake's model. The modified Greenberg's model fits best at six points and the Greenshield's model fits best two points out of eight points. The breakpoint(Kb) of modified Greenberg's model is between 10 and 32 pcphpl. Capacity drawn from speed-volume relationships were appeared to be arround 2,000 and 2,200 pcphpl at the Hannam Bridge and the Hannam Overpass and 1,100 and 1,700 pcphpl at Namsan Tunnel(No1) and the beginning point of Gyeong-Bu Expressway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.31-38
• /
• 1998

Guideway Transportation will provide the break-through to solve the traffic problems, which a lot of big cities have over the world. APM (Automated People Mover) system, Guideway Transportation, is classified by PRT, GRT, and MRT according to the capacity of passenger to be carried by its system. In the Application of PRT (Personal Rapid Transit) system, the enact analysis of the traffic problem on the area to be applied should be preceded. PRT system is characterized by Off-Line and Demand Operation. The Network of PRT system depends on the Load Time and Load Pattern. The operation of PRT system will have move efficient way when it is applied to the network with evenly distributed Load Time and Load Pattern.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.163-168
• /
• 2010

Recently, there are many problems of service qualities such as regular-rapid-safe -comfortable transport, that was traditionally advantages in urban railway transportations. These problems cause train delays that affects consecutive schedule, capacity, operation plans, and it is hard to prevent the propagation of delay and find the recovery solution. Because the urban transport demands is continuously increased and the railway service is also expanded, the railway operation company makes efforts to improve operation performance and efficiency for passengers. In this paper, we analyse the issues and problems existing in the major operation line of high-density urban railways, and suggest the development direction of intelligent operation technology to improve the urban railway service by minimizing the occurrence and propagation of delay. And the result of numerical case study is also presented.

• 대한교통학회지
• /
• 제16권2호
• /
• pp.9-22
• /
• 1998

본 연구는 U턴 효율적 운영에 필요한 기초자료 즉, U턴 이동류에 대한 차두시간, 출발손실시간, 승용차 환산계수 그리고 포화교통류율을 산정하였다. 또한 다중 U턴 횟수, U턴 허용 길이별 U턴 용량 특성을 분석하였다. 연구결과를 보면, U턴 평균 차두시간은 2.43초이고 이에 따른 포화교통율은 1,480(pcph)로 분석되었다. 출발손실은 두 번째 차량까지 손실이 있어 1.57초로 산정 되었다. 승용차 환산계수는 대형차 혼입율에 따라 1.98에서 1.35사이에 분포하며 평균값은 1.78이다. 그리고 주기당 다중 U턴 횟수가 많을수록 포화교통류율이 커졌으며 횟수가 1회, 2회 및 3회일 때 포화교통류율이 각각 1,600, 1,650 및 1,800pcph로 나타났다. U턴 허용 길이가 늘어나면 포화교통류율이 늘어나며 18m, 21m 및 30m로 증가될 때 1,570, 1,610, 및 1,640pcph로 증가하는 것이로 분석되었다.

• 대한교통학회지
• /
• 제16권3호
• /
• pp.7-14
• /
• 1998

터널의 경우 도로교통용량이 일반구간에 비해 감소하는 것으로 나타나고 있다. 그러나 연속되는 터널의 경우에 있어 도로교통용량감소에 대한 연구는 아직 이루어지지 않고 있다. 본 연구에서는 고속도로의 2지점에서 연속되는 터널의 도로교통용량의 감소특성을 이용한 터널보정계수를 산정하여 다음과 같은 결과를 도출하였다. (1) 터널을 통과하는 경우의 도로교통용량은 통과전보다 감소하는 것을 알 수 있으며, 연속되는 터널을 통과하는 경우 감소량은 이보다 큰 것으로 나타났다. (2) 터널보정계수$(f_{tu})$를 도출한 결과 하나의 터널을 통과하는 경우의 터널보정계수$(f_{tu1})$는 0.95, 연속되는 터널을 통과하는 경우의 터널보정 계수$(f_{tu2})$는 0.90으로 산정되었다.

• 대한교통학회지
• /
• 제16권3호
• /
• pp.25-36
• /
• 1998

고속도로의 Tollgate는 상습 정체지역으로 개선방안이 시급히 요구되어진다. 이에 본 연구는 요금징수소 정체 해결의 기본자료로서 중요한 역할을 수행할 요금징수소의 평균 서비스시간 산정, 설계교통량 결정 및 서비스수준 결정 규정을 제시하였다. 연구방법으로는 공간적인 연구범위인 경주 Tollgate의 교통류 특성을 비데오 카메라로 촬영하여 이를 서비 스시간 측정기를 사용하여 포화서비스시간을 분석하였다. 이를 통하여 포화교통류율을 산정 하였고, 또한 중차량 포화서비스시간을 산정하여 중차량 보정 및 승용차 환산계수를 제시하 였다. 설문지 조사를 통한 운전자의 서비스수준 결정인자와 방법에 대해 조사하고 SPSS를 사용하여 분석하였다. 그리고 설계교통량 결정을 위해서 대기행렬대수 및 대기행렬 지속시 간을 매개변수로 하여 경제성 분석을 실시하였으며, 이를 통하여 게이트 수 결정 방법을 제 시하였다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.141-151
• /
• 1998

Provision of Passing Sight Distance (PSD) is an important component in two-lane highway design and has a critical impact on capacity of highway and safety of drivers. Many models have been developed to estimate PSD reasonably. However, each of them has a number of shortcomings for reflecting the real traffic conditions. This paper introduces a revised model that reflects the characteristics of the passing maneuver. The changes in passing sight distances under different assumptions about acceleration and vehicle length, which are related to vehicle types, are presented. The results obtained by the revised model are compared with those obtained from the existing models. There is an important link between geometric design decisions which determine the available sight distance and the quality of service which the road provides. In this paper, we examine one aspect of this relationship. That is to determine whether the passing sight distance is provided by improving horizontal alignment for a specific roadway section or passing may be restricted to save the road construction cost. To do so, a simple method for estimating traffic delay in no-passing is introduced.

• 대한교통학회지
• /
• 제7권2호
• /
• pp.5-15
• /
• 1989

The Provision of a Passing lane is strongly recommended When adeguate Passing Sight distance cannot be acguired at a Section of two-lane highway. Passing lanes are usually installed at two-lane highways along the shoulder area to minimize the impact of slow-moving heavy vehicles. The design concepts and specific dimension associated with the Passing lane construction are investigated in This research. In addition a case study was made using the field study data. Currently the level of service at the case study area was analyzed to be "F" based on 1985 Highway Capacity Manual procedure. With the installation of passing lanes, the level of service was improved into "C". A computer Simulation program developed by Australian Road Research Boand was utilized to analyze the effect of passing lanes.

• Structural Engineering and Mechanics
• /
• 제7권3호
• /
• pp.241-257
• /
• 1999

This paper presents a procedure to minimize the cost of materials of cable-stayed bridges with composite box girder and concrete tower. Two sets of iterations are included in the proposed procedure. The first set of iteration performs the structural analysis for a cable-stayed bridge. The second set of iteration performs the optimization process. The design is formulated as a general mathematical problem with the cost of the bridge as the objective function and bending forces, shear forces, fatigue stresses, buckling and deflection as constraints. The constraints are developed based on the Canadian National Standard CAN/CSA-S6-88. The finite element method is employed to perform the complicated nonlinear structural analysis of the cable-stayed bridges. The internal penalty function method is used in the optimization process. The limit states design method is used to determine the load capacity of the bridge. A computer program written in FORTRAN 77 is developed and its validity is verified by several practical-sized designs.

• 한국항만학회지
• /
• 제8권2호
• /
• pp.1-35
• /
• 1994

The main arterial which runs through the in City of Pusan, carries about 60% of downtown traffic or more, maintains about 20% yearly increase in traffic is severely suffering from the traffic congestion because of concentrated traffic volumes regardless of peak-time periods. The purpose of this study was to grasp the traffic, geometric, and signal conditions of the main arterial through the Videologging System Techniques, perform the transportation system analyses, and finally suggest the improvements which could increase the travel capacity, reduce the average delay and fuel consumption with the optimal conditions of signal system. The following conclusions were drawn : firstly the traffic system should be shifted for the travel distribution on the arterial during the peak time periods, secondly the roadway system of the arterial reviewed for left-turn traffic during the peak time periods, and thirdly the signal system of intersection reconstructed for signal optimization or progression within the range of cycle length suggested.