• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.2
• /
• pp.14-23
• /
• 2015

This study was intended to evaluate the feasibility of the vehicle detector using a coil sensor. For the evaluation, the research team built a test environment for the detector consisting of a oscillation circuit, data collecting circuit, data monitoring and saving circuit, etc. As the result of the frequency analysis of the detector from the test environment, it was verified for the detector using a coil sensor to generate stable frequencies. In addition, the ease of construction and management was tested by comparing the size of cutting areas, consumption of installation materials, and installation time for a traditional loop detector and the detector using a coil sensor. As a result, the installation of the detector using a coil sensor requires less size of cutting areas, consumption of installation materials, and installation time.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.458-467
• /
• 2000

The standard of performance-based seismic design accepted by Ministry of Construction and Transport requires to install and manage earthquake instruments for the facilities of seismic category I and to acquire earthquake response data of these facilities at earthquake events. So detailed standard and guideline for installation and management of earthquake instruments for each facilities according to the seismic design standard are getting ready. This paper presents the part of installation locations of sensors in that detaile standard and guideline.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.1
• /
• pp.139-147
• /
• 1997

Sediment transport around artificial habitat which is induced by the change ol flow due to installation of the structure plays a role not only as a defect function of subsidence and burial but also bottom-environment control function. This study examined the characteristics of local scouring and deposition with sediment sizes, current velocities and installation direction of artificial habitat in flow field. Resultant subsidence and burial processes are investigated and discussed with Reynolds number. Together with sediment number and dimensionless time elapse, prediction formulas are established by combining these relationships. Bottom control function as cultivating effects is discussed with installation direction, and applicability of countermeasures is compared and stone pavement method is recommended.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.32-38
• /
• 1999

An autonomous mobile vehicle for transport system must plan optimal path in work envimnrent without human supervision and obstacle collision. This is to reach a destination without getting lost. In this paper, a genetic algorithm for globaI and local path planning and collision avoidance is proposed. The genetic algorithm searches for a path in the entire and continuous free space and unifies global path planning and local path planning. The sinmulation shows the proposed method is an efficient and effective method when compared with the traditional collision avoidance algorithms.rithms.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.164-164
• /
• 1999

An autonomous mobile vehicle for transport system must plan optimal path in work environment without human supervision and obstacle collision. This is to reach a destination without getting lost. In this paper, a genetic algorithm for global and local path planning and collision avoidance is proposed. The genetic algorithm searches for a path in the entire and continuous free space and unifies global path planning and local path planning. The simulation shows the proposed method is an efficient and effective method when compared with the traditional collision avoidance algorithms.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.145-151
• /
• 2010

This paper presents the design and implementation of direction controllers by microstep control and dc servo control for material transport system. The perfomances of direction control systems are compared in position responses and motor power consumptions between microstep control of a step motor and dc servo control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.104-108
• /
• 2008

Accurate sets of electron collision cross sections and the electron transport coefficients for atoms and molecules are necessary for quantitative understanding of plasma phenomena Kr and Xe atom are used in many industrial applications, such as in PDP and fluorescent induction lamps(FILs). Therefore, we analysed and calculated the electron transport coefficients, the electron drift velocity W, the longitudinal and transverse diffusion coefficient $ND_L$ and $ND_T$, and the ionization coefficient $\alpha$/N in pure Kr and Xe gases over the wide E/N range from 0.001 to 500[Td] at 1[Torr] by two-tenn approximation of the Boltzmann equation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.39-46
• /
• 2015

REMICON(Ready Mixed Concrete), the most essential material of construction work, is produced from facility called "Batcher plant." In order to produce Remicon, Batcher Plant needs to be supplied with basic raw material such as ballast, sand, cement, admixture and water. In remicon industry, overland transport vehicles are used during the whole manufacturing process from producing to infilling at the construction site. Thus, the transportation cost sums up be to 20 percent of whole manufacturing cost and transport capacity and distance travelled have direct and major effect on manufacturing costs. This paper suggests a method to find optimal location of batcher plant using modified Steiner point, suggesting the most effective and flexible connection through among construction site, aggregate, cement and remicon producing plant. This paper also proposes reducing of transport cost at maximum 60% by calculation through optimized plant location. The modified Steiner point theory proposed in this paper also can be applied to optimal location of a $2^{ry}$ substation or MCC panel for minimizing of power loss, voltage drop, line distance and etc.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.192-202
• /
• 2021

In the past, various studies have been conducted on safety facility installation standards and road safety indices. But there are limitations in applying them to the field, such as using many survey items and variables that are difficult to use. Therefore, this study attempted to develop road safety judgment indicators considering the applicability of the research results and to prepare criteria for installing safety facilities. As part of the study, data of related systems were reviewed, and the use of variables already in use was figured out. Furthermore, the road safety judgment indicators reflecting traffic, road, and accident factors were developed through correlation and factor analysis. Later, the criteria score for determining the installation of safety facilities was derived through cluster analysis. The analyses suggested, that the installation judgment criterion score at the intersection was lower than that of the single road(crosswalk), and the road risk at the intersection was higher.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.186-191
• /
• 2004