• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.341-345
• /
• 2011

본 연구는 충청북도 충주시 동량면과 금가면에 위치하고 있는 대전천을 대상으로 하상토 입경, 수위-유량의 변화에 따른 유사량 특성을 분석하였다. 하상재료 조사는 매 0.5 km 마다 17개 지점의 시료를 채취하였으며, 현장에서 채취한 하상토는 흙의 입도분포(KSF2302)시험법에 따라서 입경분석을 하였다. 측정 지점은 흐름이 안정적이며, 와류, 사수, 역류가 없고 접근이 용이하며 하상변동이 적은 지점을 고려하여 선정하였고, 유사의 이동이 활발한 시기인 7월에서 9월까지 평 저수기 20회, 홍수기 24회, 총 44회에 걸쳐 유량 및 부유사량을 현장 관측하였다. 평 저수시의 유속측정을 위해 초음파유속계를 사용하였으며, 홍수시에는 표면 부자를 사용하였다. 유량계산시에 면적은 중간단면법을 사용하여 유량을 계산하였다. 유량측정과 동시에 부유사 시료를 채취하였으며 부유사 관측에는 수심적분 채취접을 적용, 부유사농도는 여과법을 시행하였다. 본 하천의 현장실험 측정성과와 수리특성을 기초자료로 하여 각 회차에 걸친 총유사량의 산정을 SCST(Solution for Computing Sediment Transport)를 사용하였으며, 총유사량을 산정하는 Einstein공식, van Rijn공식, Toffaleti공식, Shen&Hung공식, Yang(1979)공식, Ackers & White공식, Engelud&Hansen공식, Ranga Raju공식 등 10개 공식을 적용하여 비교 분석을 수행하였다. 이중에서 관측된 부유사량을 고려하여 검토한 결과 Yang(1979)공식을 이용하여 추정한 총유사량이 가장 적합한 것으로 판단되었다. 그 결과 수위-유량관계곡선 및 유량-총유사량 관계곡선을 개발하였으며, 효과적인 치수 및 이수계획의 수립 등 수자원 기본자료로서 이용될 것이다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.4
• /
• pp.47-54
• /
• 1993

A series of laboratory tests was performed with soil-columns which were compacted with sands and different amount of silt collected from the mid-stream of Gumgang, Korea. A known degree of concentration of PCP(Pentachlorophenol) was poured into the soil-columns and concentration of PCP was monitored and analyzed with time and depth. The results of the study are summarized as follows : 1. PCP was transported into soil along with the movement of moisture under gravitational force. The amount of PCP transported through soil or absorbed by soil varied with soil types. 2. The great amount of PCP was remained at 4~8cm section for the specimen No.2 and at 0~4cm section for the specimen Nos. 3 and 4. Based upon this result it is said that the amount of silt between 30 and 40% may be a threshold value for PCP transported through soil. 3. The amount of PCP remained in the specimen Nos. 2, 3 and 4 is greater than that in the specimen No.1 due to high specific surface of silt and high attraction force between PCP and silt particles in the specimen Nos. 2, 3 and 4. 4. It is said that groundwater under highly permeable soil layer such as specimen No.1 is easily polluted by PCP. That is because the PCP is basically migrated with water under the gravitational force.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.253-257
• /
• 2007

Channel-aquifer interaction is one of the key hydrological processes that determine water flows in the stream/river channel. Field measurements of channel-aquifer interaction, however, is very difficult and costly, particularly when one intends to understand its variations across a catchment for a long period. Hydrological simulations using a catchment model are a relatively easier and cheaper alternative provided the model structure is appropriate for describing channel-aquifer interaction. In this study, a catchment model called CAMEL (Chemicals from Agricultural Management and Erosion Losses) is used for estimating channel-aquifer interaction over time and space. CAMEL is a distributed catchment model to simulate transformation and transport processes of sediment and pollutants as well as water flows at the catchment scale. In the model, a catchment is represented using a network of square columns each of which is comprised of various storages of water. CAMEL explicitly simulates both surface and subsurface processes including channel-aquifer interaction. This paper presents an application study results of CAMEL for the Tarland Burn Catchment, a small (catchment area $52\;km^2$) rural catchment in Scotland, UK, demonstrating some of the channel-aquifer interaction dynamics across the catchment during a 2-year period.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.107-111
• /
• 2004

본 논문에서는 PC 기반 지상파 DMB(Terrestrial Digital Multimedia Broadcasting, T-DMB) 수신기를 위한 오류에 견고한 SW 구현에 대해 설명한다. 이 수신기는 PC 외부에 T-DMB 신호를 안테나로 수신하여 복조하고 채널 복호하는 프론트 엔드(front-end) 수신 모듈을 이용, USB를 통하여 RS(Reed-Solomon) 부호화된 MPEG-2 TS(Transport Stream) 데이터를 읽어 들여 RS 복호, TS 역다중화, 비디오 보호, 오디오 복호 등의 SW 처리 과정을 거쳐 디스플레이 상에 수신 내용을 표시하게 된다. 수신기가 실용적으로 동작하기 위해서는, 수신된 비트스트림이 예상하지 못한 형태일 때도 오동작하거나 멈춰 서지 않아야 한다. 수신된 비트스트림에는 채널 비트 오류로 인해 훼손된 부분이 있을 수 있으며, 송출 시에 잘못 제작된 비트스트림도 있을 수 있다. 본 논문에서는 우선 RS 복호를 수행하여 정정 가능한 범위까지 오류를 정정하고, 검출되었으나 정정하지 못한 오류 또는 비트스트림 제작 시의 오류로 인한 비트스트림 구문 오류를 검출하여 오류 처리를 수행하며, 이로 인한 화질 손상을 숨기기 위해 프리즈 프레임(freeze-frame)을 수행하도록 하였다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.540-545
• /
• 2005

Large scale projects of sea-land reclamation have been practiced mainly to enlarge farmland in Korea. Most projects produced estuarine reservoir with dike construction, which might result in water quality problems due to block of natural flowing of stream water to the sea. Applicability of a widely accepted watershed-based water quality assessment tool (BASINS) and its associated watershed model was evaluated on the Hwaong watershed in Korea. BASINS was found to be a convenient and powerful tool for assessment of watershed characteristics, and provided various tools to delineate the watershed into land segments and river reaches, reclassify land use, and parameterize for HSPF simulation. WASP5 is a general purpose modeling system for assessing the fate and transport of conventional and toxic pollutants in surface water bodies. This study involved selection and linkage of available models to be used as a tool in evaluating the effects of BMPs for control on reservoir water quality. Overall,.Linkage of BASINS/HSPF and WASP5 was applicable and found to be a powerful tool in pollutant loading estimation from the watershed and reservoir, and its use is recommended.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.1
• /
• pp.56-60
• /
• 2001

Tidal asymmetry which is generated at the mouth of an estuary tends to be more serious toward the upper stream due to the growth of shallow tides. Thus careful observations and applications for the shallow tides are needed if studies related to sediment or pollutant transport are carried on. An aim of the present study was to clarify the characteristics of generation and propagation of shallow tides by various numerical experiments including the effect of inter-tidal zone. The results of the present study will give a fundamental guide for the analysis of tidal envirorunental changes and for the design of a numerical model if coastal constructions are conducted.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.1
• /
• pp.8-18
• /
• 2015

A numerical simulation for a nonslender BWB UCAV configuration with a rounded leading edge and span of 1.0 m was performed to analyze its aerodynamic characteristics. Numerical results were compared with experimental data obtained at a free stream velocity of 50 m/s and at angles of attack from -4 to $26^{\circ}$. The Reynolds number, based on the mean chord length, is $1.25{\times}106$. 3D multi-block hexahedral grids are used to guarantee good grid quality and to efficiently resolve the boundary layer. Menter's shear stress transport model and two transition models (${\gamma}-Re_{\theta}$ model and ${\gamma}$ model) were used to assess the effect of the laminar/turbulent transition on the flow characteristics. Aerodynamic coefficients, such as drag, lift, and the pitching moment, were compared with experimental data. Drag and lift coefficients of the UCAV were predicted well while the pitching moment coefficient was underpredicted at high angles of attack and influenced strongly by the selected turbulent models. After assessing the pressure distribution, skin friction lines and velocity field around UCAV configuration, it was found that the transition effect should be considered in the prediction of aerodynamic characteristics of vortical flow fields.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2240-2250
• /
• 2016

MIFARE Classic is the most popular contactless smart card, which is primarily used in the management of access control and public transport payment systems. It has several security features such as the proprietary stream cipher Crypto 1, a challenge-response mutual authentication protocol, and a random number generator. Unfortunately, multiple studies have reported structural flaws in its security features. Furthermore, various attack methods that target genuine MIFARE Classic cards or readers have been proposed to crack the card. From a practical perspective, these attacks can be partitioned according to the attacker's ability. However, this measure is insufficient to determine the optimal attack flow due to the refined random number generator. Most card-only attack methods assume a predicted or fixed random number, whereas several commercial cards use unpredictable and unfixable random numbers. In this paper, we propose optimal MIFARE Classic attack procedures with regards to the type of random number generator, as well as an adversary's ability. In addition, we show actual attack results from our portable experimental setup, which is comprised of a commercially developed attack device, a smartphone, and our own application retrieving secret data and sector key.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.655-665
• /
• 2013

Hybrid digital multimedia broadcasting (DMB) is a next-generation mobile TV system that combines broadcasting and wireless communication networks and can provide various high-quality multimedia services. However, if a system adheres to the current standard of transmitting the DMB content in the form of MPEG2-TS through wireless networks, it results in a burden on the network due to low transmission efficiency. The reasons for the low transmission efficiency are as follows. First, due to its constant bitrate characteristic, DMB MPEG2-TS includes a considerable amount of needless information, such as NULL packets and stuffing bytes. Second, due to the inflexibility of the Real-time Transport Protocol (RTP) standard, one cannot fully utilize the maximum transmission unit of the network when converting MPEG2-TS to RTP stream for transmission. This paper proposes a new transmission scheme that resolves these problems. Experiment results show that the proposed scheme improves data bitrate transmission efficiency by 8% to 36%, compared to the standard scheme, in the streaming of various real-DMB contents.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.17-24
• /
• 2017

In recent digital broadcasting, up to 250 channels are multiplexed and transmitted. The channel transmission is made in the form of MPEG-2 Transport Stream (TS) and transmits one channel (Video, Audio). In order to check if many broadcast channels are transmitted normally, in multi-channel multi-view system, ability of real-time monitoring is required. In order to monitor efficient multi-channel, a distributed system in which functions and load are distributed should be implemented. In the past, we used an inefficient system that gave all of the functionality to a piece of hardware, which limited the channel acceptance and required a lot of resources. In this paper, we implemented a distributed multi-view system which can reduce resources and monitor them economically through efficient function and load balancing. It is able to implement efficient system by taking charge of decoding, resizing and encoding function in specific server and viewer function in separate server. Through this system, the system was stabilized, the investment cost was reduced by 19.7%, and the wall monitor area was reduced by 52.6%. Experimental results show that efficient real-time channel monitoring for multi-channel digital broadcasting is possible.