• Korea Trade Review
• /
• v.47 no.4
• /
• pp.271-292
• /
• 2022

In Korea, the road transport industry is pointed out as a major cause of air pollutants, so management control is needed. Existing studies used only positive input and output variables to measure regional efficiency. However, it is necessary to consider the environmental pollution problem in efficiency analysis. In this study, an undesirable SBM analysis using CO₂ was conducted to measure efficiency of domestic regions. In addition, SDM was conducted to examine the ripple effect between domestic regions. As a result of the analysis, the efficiency of the capital area such as Seoul, Gyeonggi, and Incheon was high in the road transport industry. However, the efficiency of the road transportation industry in Daegu and Gangwon was low. In the SDM analysis, it was found that the regional equipment capabilities had a great influence on efficiency. In order to improve efficiency, it is necessary to increase and improve the equipment capacity of the road transport industry.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.173-174
• /
• 2010

As the quantity of goods transported, port industry and inland transport industry have developing to transport 630million ton goods annually. And the inland transport industry consists of ground transport for almost 80% of total transported goods. But, ground transport causes some serious problems especially the emission of greenhouse gases from trucks. According to issue "global warming", many regulations and agreements with countries in the world are becoming necessary and it is being fulfilled now. It is sure that Korea will have duty to reduce CO2 emission from 2013. Thus inland transport must cut off CO2 emission level. Therefore this paper will address that the calculation of CO2 emission under route of transportation container from six major container ports in Korea. And then, it will predict CO2 emission of inland transport industry according to increasing container traffic rate at ports.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.215-220
• /
• 2014

The report analyze the current situation of shipping industry in Viet Nam, including information about Viet Nam seaborne trade, shipping companies, sea-going fleets, seafarers, major seaports. Afterward it will be disclosed the policy of sea transport in Viet Nam. And finally, the author will give summary and conclusion about shipping industry in Viet Nam.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.3
• /
• pp.50-57
• /
• 2008

This paper analyse the economic inducement effects of aviation industry using Input-Output Model. For measuring economic inducement effects of aviation industry on korean economy, this paper divides air transport industry as two - manufacturing industry and service industry. we also use Input-Output Table of year 1990 through 2003 from Bank of Korea. Empirical results tells that aviation manufacturing industry have high product inducement effects to national economy although its low value-added coefficient such as 0.486 for aviation manufacturing industry and 0.447 for aviation service industry. public R&D doesn't have much effect to each of aviation industries.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.82-83
• /
• 2003

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.69
• /
• pp.371-388
• /
• 2016

International air transport for cargo services is a facilitator for various trade sectors and, by itself, an important service industry. Although international air cargo industry is expected to grow continuously, industry stakeholders complain about legal constraints in the industry and demand more liberalized regime. From its birth at the beginning of the 20th century, the airline industry was tightly regulated by governments with a strong tradition of protectionism. In the past few decades, however, protectionism in the airline industry has steadily declined. Indeed, the airline industry is largely in the process of liberalization. Interestingly, it has been easier to liberalize air cargo service than passenger service. Indeed, states have traditionally shown far more willingness to provide market access for foreign carriers carrying cargo than passengers. Given the impact of air cargo service in a state's wider economy and own characteristics of cargo services (i.e. air cargo traffic is inherently one-way, unlike passenger traffic, which tends to involve round trips), more liberalized approach is necessary for air cargo services. Among three approaches: bilateral, regional (block-based) and multilateral, it is desirable to adopt a multilateral treaty (a new multilateral all-cargo agreement) so as to harmonize and simplify complicated trade regulations on air cargo services.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.792-796
• /
• 2006

In recent years, the semiconductor industry and the optical industry is developed rapidly. The recent demand has expanded for optical components such as a optical lens, a optical semiconductor and a measuring instrument. Object transport systems are driven typically by the magnetic field and the conveyer belt. Recent industry requires more faster and efficient transport system. However, conventional transport systems are not adequate for transportation of optical elements and semiconductors. Because conveyor belts can damage precision optical elements by the contact force and magnetic systems can destroy the inner structure of semiconductor by the magnetic field. In this paper, the levitation transport system using ultrasonic wave is developed for transporting precision elements without damages. This transport system is using 2-mode ultrasonic wave excitation and flexural beam modes shapes are evaluated. It compared simulation results with experimental results

• Korean System Dynamics Review
• /
• v.11 no.2
• /
• pp.45-75
• /
• 2010

Today, the logistics industry has played a critical role in national economy activities. The low cost and high efficiency of the logistics industry are meaningful in the improvement of national competitiveness and the logistics industry. However, efficiency of logistics is lower than that of the United States and Japan since most quantities are processed in road transportation in Korea. With regard to this, existing studies expected a saving of social and environmental costs due to a decrease of road transportation as well as improvement of logistics productivity due to bulk transportation through activation of rail and costal transport. For the expectation, the existing multimodal transport systems should be improved first. Therefore it aimed to develop scenario-based simulation models of multimodal transport systems for decision makers in charge of improvement in the logistics area. For model development, this study utilized Thinking Process and System Dynamics(TP-SD) methodology.

• Journal of Environmental Health Sciences
• /
• v.3 no.1
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• Journal of Distribution Science
• /
• v.20 no.5
• /
• pp.23-33
• /
• 2022

Purpose: The purpose of this article is to study the theory of railway transport in Azerbaijan. And also to determine the economic importance of this mode of transport and analyze its relationship with the country's GDP. Research design, data and methodology: This paper studies the theory of railway transport with a focus on the case of Azerbaijan. The economic value of this type of transport is determined, and its relationship with countries' GDP was analyzed. A qualitative model of multiple regressions was developed to characterize the dependence of the GDP of Azerbaijan on the performance of the railway industry. The feasibility of the Gauss-Markov hypotheses was analyzed. Finally, an economic interpretation of the results from the developed model is provided. Results: The results show that the main factors of this dependence are the length of roads and the average monthly salary of employees of the railway industry in Azerbaijan. Conclusions: Therefore, it can be concluded that rail transport contributes to the country's economy. The commencement of active work on the new railway Baku-Tbilisi-Kars railway will increase contribution to the economy of Azerbaijan. The development of railway transportation is important for the country's economy, as it will contribute to the development of other sectors in Azerbaijan.