• Journal of Plant Biology
• /
• v.28 no.4
• /
• pp.329-332
• /
• 1985

A simple new device for obtaining very clear epidermal imprints for light microscopic studies is discussed. This new device is developed from“Britfix”(polystyrene cement) which is non-toxic to the plant organs. It involves direct application of the material on the desired surface of the plant organ to obtain thin, transparent replica. From the present investigation“Britfix”is found to be useful for the study of epidermal anatomy, morphology and physiology. Epidermal imprints can be mounted on the microscope slide without a mounting medium. Permanent slide of these imprints can be kept for any desired period without any deterioration of the replica.

• Nuclear Engineering and Technology
• /
• v.42 no.1
• /
• pp.9-16
• /
• 2010

Experimental examinations for evaluating fracutres were conducted by using transparent replicas of a single fracture in order to obtain the fracture data to contribute to the methodlogy on how to improve the definitaion of representative parameter values used for a parallel plate fracture model. Quantitative aperture distribution and quantitative tracer concentration data at each point in time were obtained by measuring the attenuation of transmitted light through the fracture in high spatial resolution. the representative aperture values evaluated from the multiple different measurement methods, such as arithmetic mean of aperture distribution measured by the optical method, transport aperture evaluated from the tracer test, and average aperture evaluated from the fracture void volume measurement converged to a unique value that indicates the accuracy of this experimental study. The aperture data was employed for verifying the numerical simulation under the assuption of Local Cubic Law and showed that the calculated flow rate through the fracture is 10%-100% larger than hydraulic test results. The quantitative tracer concentration data is also very valuable for validating existing numerical code for advection dispersion transport in-plane heterogeneous fractures.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.96-104
• /
• 2010

We suggest here a cost-effective replica fabrication method for transparent and hard molds for imprinting lithography such as NIL and S-FIL. The process starts with the use of a replica hard mold from a master, using a polymer copy as a carrier. The polymer copy as a carrier was treated by soluble process for forming anti-adhesion layer. Duplicated hard molds can eliminate direct contact between a hard master and a patterned polymer on a substrate and the generated contamination of a master during the imprinting process. The replica hard mold exhibits the glass-like properties introduced here, such as transparency and hardness, make it appropriate for nanoimprint lithography and step-and-flash imprint lithography.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.340-342
• /
• 2002

결함허용은 어떠한 시스템 요소에 결함이나 오류가 발생하더라도 시스템이 정상적으로 동작하게 하는 방안으로써 실시간 분산 시스템에서 피 효용성이 극대화된다. 본 연추는 실시간 분산 시스템의 결함 허용 기법 중 시간 제약성 측면에서 강한 여분기반 결함허용 기법을 수용한다. 이 기법의 구성 요소인 어플리케이션 서버는 그 상태가 결정적(deterministic)이냐 비결정적(nondeterministic)이냐에 따라 그 처리 기법을 달리하고 있다. 그 중 SAR(Semi-Active Replication)이 자원 활용도 측면에서 그 효율성 증명된바 있다. 본 논문에서는 SAR의 단점인 응답시간 지연문제와 클라이언트 측면에서의 결함 마스킹(fault-masking) 문제를 해결한 구조를 제안한다.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.

• Geomechanics and Engineering
• /
• v.24 no.1
• /
• pp.1-14
• /
• 2021

In this study, a new approach using electrical resistivity measurement was proposed to detect grout penetration and to evaluate the grouting performance for such as waterproof efficiency in single rock fracture. For this purpose, an electrical resistivity monitoring system was designed to collect multi-channel data in real time. This was applied to a system for grout injection/penetration using a transparent fracture replica with various aperture sizes and water-cement mix ratio. The electrical resistivity was measured under various grout penetration conditions in real time, which results were directly compared to the visual observation images of grout penetration/distribution. Moreover, the grouting success status after the curing process was evaluated by measuring the electrical resistivity in relation to changes in frequency in fracture cells where grout injection and penetration were completed. Consequently, it was determined that the electrical resistivity monitoring system could be applied effectively to the detection of successful penetration of grouting into a target area and to actual field evaluation of the grouting performance and long-term stability of underground rock structures.

• Journal of Industrial Convergence
• /
• v.20 no.9
• /
• pp.47-58
• /
• 2022

Digital content is difficult to distinguish between the original and the replica due to its nature. For this reason, NFT technology using blockchain technology is attracting attention because it can guarantee the proof and scarcity of the original digital content. However, the NFT buyer does not own the copyright to the digital content, but the ownership. In particular, since the minting process of issuing NFTs is possible for anyone, there is a copyright threat to the copyright holder. In this study, we propose a verification protocol based on DID for the process of issuing and transacting NFTs for copyright protection of copyright holders' digital contents. As a research method, the problems of research cases related to digital contents were analyzed and the safety was comparatively analyzed. NFT issuance can only be issued by copyright holders whose identity has been verified through DID, and only users who have completed authentication can participate in the transaction to prevent indiscriminate theft and use of digital content and form a safe and transparent transaction market.