• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.640-645
• /
• 2020

전자기 유도 방식의 투명 전자 패턴을 이용한 입력장치의 안정적 생산을 위해서는 생산 공정에서 미리 패턴 검사가 필요한 실정이다. 손터치용 정전용량 패턴의 검사 방법은 다양하게 제시 되어왔으나, 투명 전자기 유도 방식의 패턴 검사방법은 관련 기술 자료를 찾기 힘든 실정이다. 본 연구에서는 메탈 메쉬형 패턴으로 제작된 융합형 전자기유도 센서의 검사방법을 개발하기 위하여, 측정 센서에서 노출된 FPCB 커넥터 부분만의 측정으로 센서 내부의 안테나 임피던스를 측정하기 위한 새로운 측정알고리즘과 측정 방법을 제안하였다. 제안된 검사방법은 자체 개발된 윈도우 운영프로그램으로 제어되는 컴퓨터의 명령에 따라 미리 설정된 특정 채널 간의 루프를 형성하는 마이크로프로세서로 구성된 제어 보드, 특정 채널 간의 임피던스를 고정밀도로 측정하는 LCR 메터 그리고 측정결과를 컴퓨터로 전송하는 통신 시스템으로 구성하였다. 제안된 시스템을 설계 제작하여 자동으로 설정된 채널 간의 측정을 수행하였으며, 9개의 시편에 대하여 임피던스를 실제 측정한 결과와 제안된 시스템으로 측정한 결과, 실제 제품에 사용되는 센서의 기능 불량을 검출할 수 있는 성능을 보임을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1621-1624
• /
• 2008

Transparent ac-PDP test panel was prepared via a combination of materials including ITO sustaining electrodes, thin film dielectric layer and nano-sized phosphor powders. The thin film dielectric layer was prepared by E-beam evaporation process and phosphor layer was deposited on metal mesh pattern by electrophoretic deposition process. The optical transmittance and luminance of the panel indicated that full color transparent ac-PDP is feasible with the approach.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.241.2-241.2
• /
• 2014

We present highly transparent liquid crystal displays (LCDs) using hybrid films based on carbon nanomaterials, metal grid, and indium-tin-oxide (ITO) grid. Carbon based nanomaterials are used as transparent electrodes because of high transmittance. Despite of their high transmittance they have relatively high sheet resistance. To solve this problem, we applied grid and made hybrid conductive films based on carbon nanomaterials. Conventional photolithography processes were used to make a grid pattern of metal and ITO. To fabricate transparent conductive films, carbon nanotube (CNT) ink was spin coated on the grid pattern. The transparency of the conductive film was controlled by shape and size of the grid pattern and the thickness of CNT films. The optical transmittance of CNT-based hybrid films is 92.2% and sheet resistance is also reduced to $168{\Omega}/square$. These substrates were used for the fabrication of typical twisted nematic (TN) LCD cells. From the characteristics of LCD devices such as transmittance, operating voltage, voltage holding ratio our devices were comparable to those of pristine ITO substrates. The result shows that the hybrid conductive films based on carbon nanomaterials could be alternative of ITO for the highly transparent LCDs.

• 산업기술연구
• /
• 제39권1호
• /
• pp.33-39
• /
• 2019

This paper addresses effects of nanoscale structures on structural colors of micropatterned transparent substrate by light diffraction. Structural colors is widely investigated because they present colors without any chemical pigments. Typically structural colors is presented by diffraction of light on a micropatterned surface or by multiple interference of light on a surface containing a periodic or quasi-periodic nano-structures. In this paper, each structural colors induced by quasi-periodic nano-structures, periodic micro-structures, and nano/micro dual structures is measured in order to investigate effects of nanoscale and microscale structures on structural colors in the transparent substrate. Using pre-fabricated pattern mold and hot-embossing process, nanoscale and microscale structures are replicated on the transparent PMMA(Poly methyl methacrylate) substrate. Nanoscale and microscale pattern molds are prepared by anodic oxidation process of aluminum sheet and by reactive ion etching process of silicon wafer, respectively. Structural colors are captured by digital camera, and their optical transmittance spectrum are measured by UV/visible spectrometer. From experimental results, we found that nano-structures provide monotonic colors by multiple interference, and micro-structures induce iridescent colors by diffraction of light. Structural colors is permanent and unchangeable, thus it can be used in various application field such as security, color filter and so on.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.11-17
• /
• 2020

In this study, a new method for fabricating flexible transparent electrodes based on silver nanowire-polymer (AgNW-PEDOT:PSS) composite materials having a mesh pattern formed by a solution-based process without lithography was proposed. By optimizing conditions such as the amount of ultraviolet (UV) photosensitizer injected into the suspension of AgNW and PEDOT:PSS, UV exposure time, and deionized (DI) washing time, a clear and uniform mesh pattern was obtained. For the fabricated AgNW-PEDOT:PSS-based mesh-type electrodes, characteristics such as electrical sheet resistance, light transmittance, haze, and bending flexibility were analyzed according to the mixing ratio of AgNW and PEDOT:PSS included in the suspension. The fabricated mesh electrodes typically exhibited a low electrical sheet resistance of less than 20 Ω/sq while maintaining a high transmittance of 80% or more. In addition, it was confirmed from the results of analyzing the effect of PEDOT:PSS on the characteristics of the mesh-type AgNW-PEDOT electrode that the optical visibility was greatly enhanced by reducing the surface roughness and haze, and the bending flexibility was remarkably improved.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.813-820
• /
• 2015

We have studied commercialization and process optimization of protective film on transparent conductive coated substrate, nano silver on flexible PET (poly ethylene terephthalate), by means of roll-to-roll micro-gravure coater. Nanosilver on flexible PET substrate is potential materials to replace ITO (indium tin oxide). Protective film is most important to maintain unique silver pattern on top of transparent PET. PSA pressure sensitive adhesives) was developed solely for nano silver on PET and protective film was successfully laminated. We have optimized all process conditions such as coating thickness, line speed and aging time & temperature via experimental design. Transparent conductive film and its protective film developed in this research are commercially available at this moment.

• 로봇학회논문지
• /
• 제8권3호
• /
• pp.156-163
• /
• 2013

This paper describes a flexible visuo-haptic display module. We have developed a flexible electro-active polymer (EAP) actuator and a thin flexible visual display with $3{\times}3$ array configuration via polymer technology. The flexible actuator consists of nine EAP cells vertically moving in response to change in their thickness. The flexible display uses polymer based optical waveguide allowing light to scatter only at specific area. The display film is transparent and identically designed to the array pattern to fit for the arrangement of actuator cells. A pressure sensor is installed under the integrated module. The performance of the actuator is proved to be sufficient for satisfying perceivable range of human touch sense. The integrated system can provide interactive haptic feedback such as key pressing, contact vibration sensations, and etc. in accordance with user input.

• 복식
• /
• 제18권
• /
• pp.269-281
• /
• 1992

The purposes of this study were to 1) classify the contents of clothing image preferences, 2) find out the relationship among personal values, preferences for clothing image and clothing design, and 3) investigate the relationship between clothing image preferences and clothing design preferences, Questionnaire was comprised of three section. The clothing image preference measure was included 36 bipolar adjectives of 7-point scales. Clothing design preferences measure was included the items of patterns, colors, and textures. 'Survey of Personal Values' by Eung-Un Hwang and Kyung -hye Lee was used for measurement of 6 values : practical mindedness ; achievement ; variety ; decisiveness; orderliness; and goal orientation. Samples were 288 college women. The data were analyzed using pearson's correlation coefficient and factor analysis. The results of the study were the following. 1. Four segments of clothing image preferences derived by factor analysis : F. 1 'progressive-conservative' ; F.2. 'casual-formal'; F.3 'plain-splendid'; F.4 'masculine-feminine'. 2. In relation between personal values and clothing image preferences, 1) achievement was positively related to the preference of progressive image 2) variety was positively related to the preferences of progressive and masculine image, and 3) goal orientation was negatively related to the preferences of the progressive and masculine image, and positively related to plain image. 3. In relation between personal values and clothing design preferences, 1) practical mindedness was positively related to the preference of black, 2) achievement was positively related to the preferences of blue and such realistic pattern as floral, 3) variety was positively related to the preferences of geometric or abstract patterns and thick or transparent texture, and 4) orderliness was negatively related to the preferences of abstract pattern. 4. In relation between clothing image preferences and clothing design preferences, 1) progressive image was positively related to abstract pattern, red, blue, and black, 2) casual image was positively related to geometric pattern, green, blue, and negatively related to red and soft rexture, 3) plain image was negatively related to lustered and transparent texture, abstract pattern, red, and black, and 4) masculine image was negatively related to lustered, thin, soft, and transparent texture, floral and dotted patterns, red, orange, and yellow.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.639-642
• /
• 2002

A new PDP barrier rib formation technique was investigated utilizing transparent soft maid made of silicon resin. Transparent soft mold was fabricated by pouring a silicone resin into the base mold made with photosensitive glass. The photosensitive barrier rib paste was coated on the glass substrate and dried in a 90 $^{\circ}C$ convection oven for 20min. The transparent soft mold was pressed on top of the semi-dry barrier rib layer and then irradiated with a UV lamp to a total dose of $900{\sim}1000mJ/cm^2$ The soft maid was then removed from the pressed barrier rib by winding up and fine pattern of barrier rib was obtained. The photosensitive barrier rib paste makes the demolding easy due to reduced interfacial forces and shrinking of paste materials.

• 폴리머
• /
• 제35권1호
• /
• pp.1-6
• /
• 2011

사출성형은 고온의 수지를 고압으로 금형에 충전하고 냉각하여 제품을 만드는 공정으로 큰 온도차이와 고압에 의해 성형품에 잔류응력이 형성된다. 이러한 잔류응력은 시간이 지남에 따라 이완되면서 제품에 변형을 일으켜 형상 품질을 저하시킨다. 본 연구에서는 광탄성 장치를 이용하여 투명한 사출성형품의 잔류응력을 측정하는 방법을 연구하였다. 빛은 전자파처럼 진행하는데 편광필름을 통과하면 하나의 파장만이 진행하게 된다. 그 파장이 시편을 통과하면서 시편에 존재하는 잔류응력 때문에 복굴절이 형성되고 두 번째 편광필름을 통과하면서 다양한 색의 패턴을 보이게 된다. 이 색의 패턴을 이용하여 사출성형으로 제작된 사각평판의 잔류응력을 정량적으로 측정하였다. 또한 컴퓨터 해석을 통해 사출성형품의 광학적 특성을 예측하였으며 실험과 비교하였다.