• 열처리공학회지
• /
• 제28권1호
• /
• pp.7-16
• /
• 2015

The fabrication of high quality graphene using chemical vapor deposition (CVD) method for application in semiconductor, display and transparent electrodes is investigated. Temperature and pressure have major impact on the growth of graphene. Graphene doping was obtained by deposition of $MoO_3$ thin films using thermal evaporator. Bilayer graphene and the metal layer graphene were obtained. According to the behavior of graphene growth P-type doping was confirmed. Graphene obtained through experiments was analyzed using optical microscopy, Raman spectroscopy, UV-visible light spectrophotometer, 4-point probe sheet resistance meter and atomic force microscopy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.198-201
• /
• 2004

We have developed a multi-domain vertically aligned liquid crystal display (MVA-LCD) that produces natural gray-scale images even at high viewing angles. We divided each pixel into two areas and set different threshold voltages for each sub-area. A transparent electrode in a sub-area is not connected directly to the source electrodes but via the capacitance of the SiN layer. In particular, light-orange skin color appears very natural, even at a high inclination angle. The contrast ratio is over 500 in the normal direction and over 10 from any viewing angle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.298-299
• /
• 2006

본 연구에서는 전면 발광 OLED용 투명 금속 전극 소자의 제조를 위해 Al과 Ag 재료를 가지고 박막의 두께에 따른 투과도와 면저항을 조사하였다. Al 금속 재료의 박막 두께가 30nm에 따른 면저항값은 $8{\Omega}/{\square}$로 조사되었고, 70% 이상의 투과도를 가진 금속의 두께는 10nm 이상으로 조사되었다. Ag 금속 재료의 최적의 두께 25nm에 따른 면 저항값는 $4.5{\Omega}/{\square}$로 조사되었고, 70% 이상의 투과도를 가진 Ag 금속의 두께는 5nm 이하로 조사되었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.2.3-2.3
• /
• 2011

With increased interest in printed devices, various metal nano inks have been investigated as candidates materials for printed electrodes and wiring as well as conductive film substituting photo-lithography process. Recent advances in organic conductive polymer allow us to fabricate high performance printed device. Meanwhile, there was several attempts to fabricate conductive films by mixing conductive polymer with metal nano-particle or nano-wires. The presence of Ag nanowires in conductive polymer mixture have shown good potential in organic photovoltaic devices.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.19-23
• /
• 2009

In this paper, we review the proposed liquid crystal display (LCD) with a tunable viewing angle consisting of a conventional liquid crystal display (LCD) panel and a thermally variable retardation layer (TVRL) characterized by uniformly aligned LC film with transparent indium-tin-oxide electrodes for Joule heating. In the TVRL, nematic phase is transitioned into isotropic by Joule heating. The numerical calculation showed that the intrinsic wide viewing angle was achieved at the isotropic phase of the TVRL by Joule heating, whereas the narrow viewing angle was obtained at the nematic phase of the TVRL. The simulated and experimental results of the proposed LCD show continuous and symmetrical viewing angle characteristics by tuning the retardation of TVRL using Joule heating. The structure of the viewing angle control proposed here is adoptable to all LCD modes with wide viewing angle characteristics.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1566-1571
• /
• 2009

The discharge electrodes in ac PDP are coated with dielectric layer, and transparent MgO thin films are deposited on the dielectric layer. The main role of the MgO thin films in ac PDP is to protect the dielectric layer from sputtering by ion bombardment in the glow-discharge plasma. An additional important role of the MgO thin film is the high secondary electron emission coefficient which leads the low firing voltage and low cost of the PDP. In this paper, we investigated the relations of the crystal orientation about deposition thickness, deposition rate, temperature of substrate, and distance between the MgO tablet and the substrate. Additionally, we investigated the discharge characteristics of the AC PDP using nano-powder MgO tablet

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1147-1148
• /
• 2015

This study demonstrates the coating effect of carbon nanotubes on metal meshes, which have been made with various line-spaces and line-width, for touch screen panels. The CNTs have been deposited on metal meshes via electrophoretic deposition (EPD). The sheet resistances, visible transmittances, visible reflectances have been measured before and after electrophoretic deposition. The experimental results confirm that CNT coating metal meshes with various line-spaces and line width can satisfy the requirements that are required for transparent electrodes of touch screen panels.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1277-1282
• /
• 2008

Recently LCD panels have becom very important components for portable electronics. In the high density interconnection material, ACF's are used to connect the outer lead of the tape automated bonding to the transparent indium tin oxide electrodes of the LCD panel. ACF consists of an adhesive polymer matrix and randomly dispersed conductive balls. In this study, we analyzed Failure Mode / Mechanism of ACF which is identified Conductive ball Corrsion, Delamination, Crack and Polymer Expansion / Swelling. In ALT(Accelerated Life Test), we select primary stress factors as temperature and humidity. As time passes by, an increase of connection resistance was observed. In conclusion, we have found that high temperature / humidity affects the adhesion.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.252-252
• /
• 2014

투명전극 제조에 이용되고 있는 진공기반 ITO공정의 제조 단가를 줄이기 위하여 용액 기반의 투명전극 제조 기술에 대한 연구를 수행 하였다. 용액공정을 수행하기 위하여 ITO 나노입자를 이용한 잉크를 제조하고 이를 잉크젯 인쇄공정에 적용하여 ITO 투명전극을 제조하였다. 열처리 온도에 따른 전기적 광학적 특성에 대한 분석을 진행하였다. 전기적 물성의 극대화를 위해 Ag metal grid를 인쇄공정을 통해 제작하고 용액기반 ITO 박막과 융합화(hybridization) 시켰다. Ag metal grid의 line width를 최소화 하기 위하여 전기수력학 방식의 잉크젯 시스템을 사용하여 metal grid를 형성하였고 Ag metal grid는 약 10um의 선폭을 가졌다. 인쇄된 Ag-grid/ITO 박막의 경우 550 nm파장에서(Ag grid pitch: 500 um기준) 약88%의 투과도를 보이며 저항이 $5{\Omega}/{\square}$ 이하의 특성을 나타내었다.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.44-49
• /
• 2007

In the fabrication of dye-sensitized solar cells (DSSCs), carbon counter electrode has been tested for replacing the platinum counter electrode which has two drawbacks: limited surface area and high material cost. Poor mechanical stability of carbon layer due to weak bonding strength to electrically conductive TCO (transparent conducting oxide) glass substrate is a crucial barrier for practical application of carbon counter electrode. In the present study a carbon counter electrode with high conversion efficiency, comparable to Pt counter electrode, could be fabricated by adaption of a bonding layer between particulate carbon material and TCO substrate.