• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.57-63
• /
• 2019

In order to facilitate the supply of gradually increasing power demand, it is also necessary to increase the number of power cables for power transmission as well as generation facilities. However, the expansion of electric power cables for supplying power to most urban areas requires a space for installation of additional cables, and the space for installing cables in domestic downtown areas is insufficient at present. The superconducting power cable, which can transmit more power with the same size, has emerged as an alternative to overcome the insufficient cable installation space. However, superconducting power cables, which have the advantage of large power transmission, have some losses in the AC (Alternating Current) system. Therefore, the design and analysis of AC losses are essential to introduce superconducting power cables in AC power transmission systems. In this paper, we analyze the AC loss of various superconducting power cables and consider the actual superconducting power cables and their application to the system. Although there is a theoretical calculation method of AC loss for single superconducting wire, it is not easy to calculate AC loss of superconducting power cable with large number. Therefore, the authors intend to analyze various kinds of superconducting power cable AC loss by using electromagnetic finite element analysis considering E-J (Electric field-Current density) characteristics of superconductivity. The analysis of the AC loss characteristics of the superconducting power cable will be an important factor in the design and development of the superconducting power cable to be applied to the actual system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.417-424
• /
• 2021

The S-band telemetry and telecommand formats for geostationary orbit satellites should have sufficient reliability, since they transmit massive satellite health data and receive the mission commands in the 36,000km of the geostationary orbit. Also, they have to efficiently manage the large quantity of satellite health data under the limited data transmission rate. Cheollian-2A and 2B satellites were developed by Korea Aerospace Research Institute and launched at 2018 and 2020, respectively. Their missions are to conduct continuously the mission of Cheollian-1, which was the first geostationary orbit satellite of Korea. Therefore, the fundamental S-band data format design for Cheollian-2A and 2B should meet the requirements of Cheollian-1. Meanwhile the latest remote data processing techniques for these newest geostationary orbit satellites should be implemented. In this paper, the advanced S-band space data formats and management methods are proposed for more efficient data transmission, reception and operation with the limited data rate of the geostationary orbit satellites. The implemented results in the flight software of Cheollian-2A and 2B are described in detail.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.553-565
• /
• 2021

Point cloud is a set of points for representing a 3D object, and consists of geometric information, which is 3D coordinate information, and attribute information, which is information representing color, reflectance, and the like. In this way of expressing, it has a vast amount of data compared to 2D images. Therefore, a process of compressing the point cloud data in order to transmit the point cloud data or use it in various fields is required. Unlike color information corresponding to all 2D geometric information constituting a 2D image, a point cloud represents a point cloud including attribute information such as color in only a part of the 3D space. Therefore, separate processing of geometric information is also required. Based on these characteristics of point clouds, MPEG under ISO/IEC standardizes V-PCC, which imitates point cloud images and compresses them into 2D DCT-based 2D image compression codecs, as a compression method for high-density point cloud data. This has limitations in accurately representing 3D spatial information to proceed with compression by converting 3D point clouds to 2D, and difficulty in processing non-existent points when utilizing 3D DCT. Therefore, in this paper, we present 3D Discrete Cosine Transform-based Point Cloud Compression (3DCT PCC), a method to compress point cloud data, which is a 3D image by utilizing 3D DCT, and confirm the efficiency of 3D DCT compared to V-PCC based on 2D DCT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.231-239
• /
• 2021

The purpose of this study was to understand how a dental hygienist is viewed by students in terms of both image and job /employment perception using structural equations. This together with the incorporation of available online information would help in collating the necessary data for ensuring adequate manpower of dental hygienists' in the future. The collected data were analyzed using SPSS Statistics 24.0 and AMOS Graphics 21.0 statistics packages. It was found that students who perceive employment positively have a positive image of a dental hygienist even if a new infectious disease were to occur. They appreciate that a negative image of a dental hygienist's job during an epidemic could cause a negative perception of employment as a dental hygienist. Those who think negatively of the internet as a source of information believe that the internet has a lot of false information, is harmful, promotes anxiety, and has been shown to promote negative perceptions about employment as a dental hygienist. Those who think positively of internet information think that dental hygienists are susceptible to infection and can transmit infection, which has been shown to negatively affect their perception of employment. In conclusion, it is important to form an image of a dental hygienist through the recognition of the correct internet information in the period of new infectious diseases.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.76-83
• /
• 2018

In order to prevent overusing the fishing gear and to reduce discarded fishing gear, there is a need for a technique that can efficiently transmit the information including the type and location of the fishing gear and the user's real name to the fishing boat and the control center using IoT-based communication. In order to do this, it is necessary to be able to confirm the position information of a plurality of buoys that can be identified by the base stations on the land. In this paper, in order to service the maritime IoT communication system, we calculate the link budget between the land base station and the targets on the sea to derive the service coverage. To design a marine IoT radio network for building a fishing gear monitoring system, we calculate link budget for wireless service optimization at sea for NB-IoT using 1.8 GHz frequency band and LoRa service using 900 MHz frequency band. In addition, the link budget between the land base station and buoy, the link budget between the land base station and fishing boat are calculated and the results are analyzed.

• Journal of Apiculture
• /
• v.34 no.1
• /
• pp.47-55
• /
• 2019

Honey bees are a vital part of the food chain as the most important pollinators for a broad palette of crops and wild plants. The climate change and colony collapse disorder (CCD) phenomenon make it challenging to develop ICT solutions to predict changes in beehive and alert about potential threats. In this paper, we report the test results of the bee-counting system which stands out against the previous analogues due to its comprehensive components including an improved dual infrared sensor to detect honey bees entering and leaving the hive, environmental sensors that measure ambient and interior, a wireless network with the bluetooth low energy (BLE) to transmit the sensing data in real time to the gateway, and a cloud which accumulate and analyze data. To assess the system accuracy, 3 persons manually counted the outgoing and incoming honey bees using the video record of 360-minute length. The difference between automatic and manual measurements for outgoing and incoming scores were 3.98% and 4.43% respectively. These differences are relatively lower than previous analogues, which inspires a vision that the tested system is a good candidate to use in precise apicultural industry, scientific research and education.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.68-77
• /
• 2021

In this paper, a GPS/MEMS IMU integrated navigation receiver module capable of operating in a high dynamic environment is designed and fabricated, and the results is confirmed. The designed module is composed of RF receiver unit, inertial measurement unit, signal processing unit, correlator, and navigation S/W. The RF receiver performs the functions of low noise amplification, frequency conversion, filtering, and automatic gain control. The inertial measurement unit collects measurement data from a MEMS class IMU applied with a 3-axis gyroscope, accelerometer, and geomagnetic sensor. In addition, it provides an interface to transmit to the navigation S/W. The signal processing unit and the correlator is implemented with FPGA logic to perform filtering and corrrelation value calculation. Navigation S/W is implemented using the internal CPU of the FPGA. The size of the manufactured module is 95.0×85.0×.12.5mm, the weight is 110g, and the navigation accuracy performance within the specification is confirmed in an environment of 1200m/s and acceleration of 10g.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2020

In a wireless power transmitter, the characteristics and effects of wireless power transmission between two induction coils are investigated, and a power converter circuit and a battery charger/discharger circuit using wireless power transmission technology are proposed. The advantage of wireless power transmitters and wireless chargers is that, instead of the existing plug-in-mounted wired charger (OBC; on-board charger), the user can wirelessly charge the battery without connecting the power source when charging power to the battery. There is. In addition, the advantage of wireless charging can bring about an energy efficiency improvement effect by using the secondary side rectifier circuit and the receiving coil, but the large-capacity long-distance wireless charging method has a limitation on the transmission distance, so many studies are currently being conducted. The purpose of the study is to study the transmitter circuit and receiver circuit of a wireless power transmission device using a primary coil, a secondary coil, and a half bridge series resonance converter, which can transmit power of a non-contact type power transmitter. As a result, a new topology was applied to improve the power transmission distance of the wireless charging system, and through an experiment according to each distance, the maximum efficiency (95.8%) was confirmed at an output of 3 kW at an 8 cm transmission distance.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.677-687
• /
• 2021

If a fire breaks out in a building, occupants can evacuate more rapidly if they are able to identify the location of the fire, the exits, and themselves. This study derives the requirements of system development, such as distance non-limitation, a non-additional device, a non-centralized server system, and low power for an emergency, to identify information about the fire and the location of evacuees. The objective is to receive and transmit information and reduce the time and effort of the database for location tracking. Accordingly, this study develops a server-independent system that collects information related to a building fire and an evacuee's location and provides information to the evacuee on their mobile device. The system is composed of a transmitting unit to disseminate fire location information and a mobile device application to determine the locations of the fire and the evacuee. The developed system can contribute to reducing the damage to humans because evacuees can identify the location of the fire, exits, and themselves regardless of the impaired server system by fire, the interruption of power source, and the evacuee's location. Furthermore, this study proposes a theoretical basis for reducing the effort required for database construction of the k-nearest neighbor fingerprint.

• Informatization Policy
• /
• v.28 no.4
• /
• pp.54-75
• /
• 2021

The right to data portability needs to be introduced to strengthen the self-control of data subjects and promote personal data use. However, the right to data portability constitutes a high risk of invasion of privacy of data subjects and may infringe on the property rights of data controllers, so careful and thorough design is warranted. The right to data portability can intensify the concentration and monopoly of personal data, result in problems of overseas transfer of personal data held by public institutions, and enrich only the profits of giant platforms by burdening the data subject with high transfer cost. By contrast, SMEs are more likely to endure a personal data deprivation. From the proposed amendment to the Personal Data Protection Act are raised various legal issues such as. i) Whether to include inferred/derived data, personal data held by public institutions, activity data, sensitive data, and personal data of third parties within the scope of data portability; ii) whether SMEs are included in the data porting organization; iii) whether to exclude SMEs or large platforms from the scope of the data receiving organization; iv) Whether to allow the right to transmit to other data controllers, v) Whether to allow the overseas transfer of personal data held by public institutions, vi) How to safely exercise the right to data portability, vii) the scope of responsibility and immunity of a data porting organization, etc. The purpose of this paper is to propose the direction for legislative action based on various legal issues related to data portability.