• 디지털콘텐츠학회 논문지
• /
• 제10권4호
• /
• pp.649-657
• /
• 2009

일반적으로 초고속 네트워크에서 실행되는 분산 시스템의 데이터 전달처리 효율은 시스템 구조 및 데이터의 전달처리 시스템에 의존한다. 분산 환경을 이용한 실시간 분산 시뮬레이션 시스템은 데이터전달처리의 실시간성과 시스템의 신뢰성 보장을 위하여 데이터 전달처리 시스템에 의하여 요구된 성능을 만족하고자 하였다. 그러나 실시간 시뮬레이션 시스템에 적용된 클라이언트/서버 기반의 데이터 전달처리 시스템은 시스템의 안정성 및 시스템의 변경에 따른 확장성과 유지보수성 확보가 어려웠다. 따라서 기존의 데이터 전달처리 시스템의 문제점을 해결하기 위하여 새로운 데이터 전달처리 시스템이 필요하다. 본 논문에서는 기존의 실시간 시뮬레이션 시스템을 분석하여 시스템 개선방향을 제시하고, 시스템 확장성, 상호운용성, 재사용성 및 유지보수성을 위하여 소프트웨어 디자인 패턴을 적용한 새로운 실시간 데이터 전달처리 시스템을 제안한다.

• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.305-316
• /
• 1993

Fuel efficiency in tractor operations dep6nds on the selection of transmission gears and upon the engine being operated at or near maximum torque much of time. The objective of this study was to develop automatic control systems for tractor transmission ratio and governor setting so that the engine is operated at or near maximum torque as much of time as possible. An indoor test unit, which can be used to simulate tractor operation, was built in order to investigate the system design parameters and test the performance of the control system designed. The test-unit consists of engine, gear-type transmission, dynamometer, and control systems for transmission ratio and engine speed. Governor setting lever was controlled by a step motor, and the clutch and transmission levers were controlled by hydraulic cylinders and solenoid valves. The control systems showed good time responses which are assumed to be suitable for optimal tractor operation. The time required for shifting gears from clutch disengagement to engagement was about 1 second, which is almost the same as that for manual shift. And the settling time for engine speed control system was about 5 to 6 seconds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.107-108
• /
• 2007

Overhead transmission lines are completely exposed to the environment. This causes faults in transmission lines due to natural environmental conditions. In some cases, transmission towers are damaged by typhoons and snow, as well as sleet on the transmission lines. It takes a lot of time to repair the damaged towers. For emergency restoration purposes, steel poles are installed to temporarily supply power. Before 2003, emergency restoration steel poles were made of angled steel, which required a large number of beams, bolts, etc. In addition, the foundation of the steel pole and ground wire was constructed using excavation and burial methods, therefore it required a lot of manpower and time to construct temporary transmission lines. In September 2003, typhoon Maemi, whose maximum wind speed was 60m/s, hit Korea. 'Maemi' destroyed transmission lines in the Busan and Geojea area, causing long blackouts. To reduce the recovery time to the damaged transmission lines, self-build based emergency towers were developed. self-build based emergency towers reduced recovery time from 24 hours to 4 hours or less. However, the self-build based emergency tower had no arms, so the temporary transmission lines could only be constructed without curves in line routes. In this paper, solving these self-build based emergency tower limitations, using insulated arms(designed for use with the self-build based emergency tower), shall be explained.

• 한국정보통신학회논문지
• /
• 제27권1호
• /
• pp.135-138
• /
• 2023

In this paper, we study real-time error in the context of monitoring a binary information source through a delay system. To derive the average real-time error, we model the delay system as a discrete time Geo/D/1/1 queueing model. Using a discrete time three-dimensional Markov chain with finite state space, we analyze the queueing model. We also perform some numerical analysis on various system parameters: state transition probabilities of binary information source; transmission times; and transmission frequencies. When the state changes of the information source are positively correlated and negatively correlated, we investigate the relationship between transmission time and transmission frequency.

• 한국정보통신학회논문지
• /
• 제26권2호
• /
• pp.317-320
• /
• 2022

This paper studies real-time error in the context of monitoring a symmetric binary information source over a delay system. To obtain the average real-time error, the delay system is modeled and analyzed as a discrete time Markov chain with a finite state space. Numerical analysis is performed on various system parameters such as state transition probabilities of information source, transmission times, and transmission frequencies. Given state transition probabilities and transmission times, we investigate the relationship between the transmission frequency and the average real-time error. The results can be used to investigate the relationship between real-time errors and age of information.

• 한국전자거래학회지
• /
• 제13권2호
• /
• pp.149-163
• /
• 2008

센서 네트워크에서는 데이터의 실시간 처리가 중요한 요소 중의 하나이다. 각 노드들이 감지한 데이터를 정해진 시간 내에 전달해야 필요한 시기에 적합한 처리가 가능하다. 따라서 노드들이 데이터를 정해진 시간 내에 제대로 전달하고 있는가를 점검하는 것은 매우 중요하다. 이에 따라 본 논문에서는 데이터 전송시간에 대한 모니터링을 통하여 센서 네트워크에 존재하는 노드들이 허용시간 범위 내에서 서버로 데이터를 전송하고 있는가를 확인하기 위한 데이터 전송시간 분석 시스템의 구현 사례를 제안한다. 이를 위하여 데이터 전송시간 분석을 위한 절차를 제시하고, 제시한 절차에 따라 전송시간을 분석하기 위해 필요한 시간차 분석 방법, 데이터 송수신 시간 수집 방법 및 데이터 전송시간 계산 방법을 제시한다. 또한 제시한 방법을 바탕으로 데이터 전송시간을 모니터링하고 분석하기 위한 시스템을 구현하고, 사례 연구를 수행한 결과를 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.652-657
• /
• 2004

As the real-time multimedia applications through Internet increase, the bandwidth available to TCP connections is oppressed by the UDP traffic, result in the performance of overall system is extremely deteriorated. Therefore, developing a new transmission protocol is necessary. The TCP-friendly algorithm is an example meeting this necessity. The TCP-friendly (TFRC) is an UDP-based protocol that controls the transmission rate based on the available round transmission time (RTT) and the packet loss rate (PLR). In the data transmission processing, transmission rate is determined based on the conditions of the previous transmission period. If the one-step ahead predicted values of the control factors are available, the performance will be improved significantly. This paper proposes a prediction model of transmission rate control factors that will be used for the transmission rate control, which improves the performance of the networks. The model developed through this research is predicting one-step ahead variables of RTT and PLR. A multiplayer perceptron neural network is used as the prediction model and Levenberg-Marquardt algorithm is used for the training. The values of RTT and PLR were collected using TFRC protocol in the real system. The obtained prediction model is validated using new data set and the results show that the obtained model predicts the factors accurately.

• 한국정보통신학회논문지
• /
• 제25권4호
• /
• pp.581-587
• /
• 2021

실시간 비디오 스트리밍은 컨텐츠 전달 및 원격회의 등에 사용되는 기술로, 전송지연에 민감한 기술 중 하나이다. 최근 코로나바이러스 감염증(COVID-19)으로 인해 개인방송/원격회의와 같은 개인이 제작 및 이용하는 컨텐츠들이 증가하면서, 실시간 비디오 스트리밍 시 전송지연 저감과 더불어 스트리밍 되는 컨텐츠에 대한 보호의 필요성이 강조되고 있다. 따라서, 본 연구에서는 실시간 비디오 스트리밍에 선별적 비디오 암호화 방법을 적용할 경우 발생하는 전송지연을 저감하기 위한 패킷 응집 관련 알고리즘을 제안하였다. 제안 방법은 선별적 비디오 암호화 프레임워크에서 패킷 단위로 재배치된 비디오 데이터 전송 시 한 번에 전송되는 크기의 조절이 가능하도록 개선하였으며, 실제 테스트베드를 통한 실험결과는 제안 방법 적용 시 기존대비 전송지연을 약 11% 저감할 수 있음을 보여주었다.

• ETRI Journal
• /
• 제31권3호
• /
• pp.348-350
• /
• 2009

To fit the limited volume and power consumption of the passive radio frequency transmission system of the electronic time fuze, an improved coded mark inversion (CMI) is proposed in this letter. From the performance analysis, the energy transmission efficiency of this encoding method is at least 50% higher than that of CMI and NRZ. Finally, the experiment results show that by adopting this improved CMI, the change of DC voltage through magnetic coupling is lower than 0.2 V when the accuracy of data transmission is above 99.5%.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.21-26
• /
• 2012

As the new requirements for wireless sensor networks are emerging, real-time communications is becoming a major research challenge because resource-constrained sensor nodes are not powerful enough to accommodate the complexity of the protocol. In addition, an efficient energy management scheme has naturally been a concern in wireless sensor networks for a long time. However, the existing schemes are limited to meeting one of these two requirements. To address the two factors together, we propose real-time communications with two approaches, a protocol for satisfied conditions and one for unsatisfied. Under the satisfied requirement, existing real-time protocol is employed. On the other hand, for the unsatisfied requirement, the newly developed scheme replaces the existing scheme by adjusting the transmission range of some surplus nodes. By expanding the transmission range, the end-to-end delay is shortened because the number of intermediate nodes decreases. These nodes conserve their energy for real-time communications by avoiding other activities such as sensing, forwarding, and computing. Finally, simulation results are given to demonstrate the feasibility of the proposed scheme in high traffic environments.