• Journal of Broadcast Engineering
• /
• v.1 no.1
• /
• pp.29-34
• /
• 1996

In data transmission system, some data are more sensitive to channel errors. Unequal error protection method increases transmission reliability by protecting channel error sensitive data more than other data. However, this method cannot be directly applied to vector quantized signals which are designed by LBG algorithm that assumes no channel distortion in the design, process. Therefore, in this paper, to apply unequal error protection to vector quantized signals, we propose a method which systematically assigns binary indexes to code vectors. We applied the proposed method to the transmission of vector quantized first-order Gauss-Marcov signals assuming that the percentage of the important data is 50%

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1283-1291
• /
• 2003

Nonuniform transmission lines(NTLs) with the desired frequency response can be realized by synthesizing the potential from the coupled mode Zakharov-Shabat(ZS) equation in the one-dimensional inverse scattering problem. In this study, an efficient synthesis method using the ZS equations is presented for NTLs with arbitrarily specified reflection coefficients which take the restricted potential. This method lessens the line length which plague conventional design schemes using specific windows for reflection coefficients. Furthermore solving the ZS inverse transform problem is simplified by adopting the successive approach instead of the conventional iterative method. The proposed method is compared with the conventional method using specific windows by applying to design of dispersive NTL filters, and verified by two-port analysis through the chain matrix.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.350-353
• /
• 2001

This study proposes a new method for the transmission system expansion planning using the fuzzy integer programming. It presents stepwise cost characteristics analysis which is a practical condition of an actual systems. A branch and bound method which includes the network flow method and the maximum flow-minimum cut set theorem has been used in order to proceed the stepwise cost characteristics analysis. Uncertainties of the permission of the construction cost and not strict reserve rate and load forecasting of expansion planning have been included and also processed using fuzzy set theory in this study. In order to proceed the latter analysis, the solving procedure is illustrated in detail by branch and bound method which includes the network flow method and maximum flow-minimum cut set theorem. Finally, case studies on 21-bus test system show that the algorithm proposed is efficiently applicable to the practical expansion planning of transmission systems in future.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.2 s.302
• /
• pp.11-20
• /
• 2005

In previous video conference system, when the number of participants in video conference increases by n, the bandwidth and memory of n2 is required. And also, it brings about increase in traffic and problem of a say during a conference in aspect of transmission of voice data. In this paper, we propose an algorithm of remote video conference using silence detection algerian to resolve the questions such as buffering method of video data in server and heavy traffic detection algorithm to the increase in participants. Video data buffering algorithm is not a method of broadcasting to other client in the server, but this algorithm uses two other methods; the buffering method of receiving compressed video data from clients and the indexing method for acquiring the video data of other participants in clients according to clients' bandwidth and network transmission speed. We apply a voice transmission algerian and a channel management algorithm to the remote video conference system. The method used in the voice transmission algorithm is a silence detection algorithm which does not send silent participants' voice data to the server. The channel management algorithm is a method allocating a say to the participants who have priority. In consideration of average 20 frames and 30ms regardless of a number of participants, we can safely conclude that the transmission of video and voice data is stable.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.270-278
• /
• 2020

In this paper, sound transmission of Micro-Perforated Plates (MPPs) installed in an impedance tube with a circular cross-section is described using an analytic method. Vibration of the plates is expressed in terms of an infinite series of modal functions, where modal function in the radial direction is given by the Bessel function. Under the plane wave assumption, a low frequency approximation is derived, and a formula for the sound transmission coefficient of multi-layered MPPs is presented using the transfer matrix method. The Sound Transmission Losses (STLs) of single and double MPPs are computed using the proposed method and compared with those done by the Finite Element Method (FEM), which shows an excellent agreement. As the perforation increases, the STL is degraded, since the STL becomes dominated by the perforation ratio rather than by vibration of the plate. The STL shows dips at natural frequencies as well as at the mass-spring-mass resonance frequency. The proposed model for the STL prediction in this study can be applied to an arbitrary number of MPPs, where each MPP may or may not have a perforation.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.115-120
• /
• 2005

Impact seismic wave method is a method for non-destructive testing of concrete structure using of stress wave which is propagate and reflected from internal flaws within concrete structure and external surface. In this study, we performed frequency domain method using impact seismic wave test for safety diagnosis of civil engineering structure. And reflection method which is used for one-dimensional target such as tunnel lining and transmission method are compared with each other.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.310-316
• /
• 1999

4-Pole parameter method based on an acoustic theory is very popular for the analysis of the acoustic behavior of the car exhaust system. However, this method is applicable only for the simple shape of acoustic elements of the muffler. Numerical methods such as FEM(Finite Element Method) or BEM(Boundary Element Method) can also provide acceptable results for the acoustic analysis of the car exhaust system. Even though these numerical methods have benefits for the analysis of complicated shape of acoustic elements of the muffler, time consuming is another problem during modeling and numerical calculation. Combining benefits of both methods, the new code called the hybrid method for car exhaust system is introduced. And the developed code is utilized for calculation of the transmission loss of a main muffler of an automobile comparing with the experimental results.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.373-376
• /
• 2000

Coplanar-type MIS transmission lines have been simulated using FDTD method and compared with the measured results and the simulated results of the reference paper［3］. We can confirm that our simulation results are similar to measured results compared to the previous simulated results of the reference paper. Moreover, variations of characteristic impedance by insulator thickness are calculated for the insulator thickness of 0.0,0.5 and 1.0$\mu\textrm{m}$.

• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.67-71
• /
• 2003

In this paper, frequency modulated(FM) reflectometry is proposed to measure group velocity of microwave transmission line Various microwave transmission lines such as periodically loaded conducting posts in a waveguide and nonradiative dielectric(NRD) guide are adopted to measure their group velocity The result compared with that from network analyzer shows good agreement, indicating the validity of our measurement method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.994-999
• /
• 1993

To service with high quality electricity to customer, the utilities consider the DAS (Distribution Automation System) as a good means of it. The backbone of the DAS are communication and computer technique. Most of all, from the economical and functional point of view, the selection of transmission media for system communication is the key factor to achieve a successful DAS. In this paper author propose the method of the DAS communication which share its channel with CATV transmission line and analyze the effect.