• Ocean Systems Engineering
• /
• 제11권1호
• /
• pp.83-97
• /
• 2021

The submerged U-shape breakwater interaction with the solitary wave is simulated by the Boussinesq equations using the finite-difference scheme. The wave reflection, transmission, and dissipation (RTD) coefficients are used to investigate the U-shape breakwater's performance for different crest width, Lc1, and indent breakwater height, du. The results show that the submerged breakwater performance for a set of U-shape breakwater with the same cross-section area is related to the length of submerged breakwater crest, Lc1, and the distance between the crests, Lc2 (or the height of du). The breakwater has the maximum performance when the crest length is larger, and at the same time, the distance between them increases. Changing the Lc1 and du of the U-shape breakwaters result in a significant change in the RTD coefficients. Comparison of the U-shape breakwater, having the best performance, with the averaged RTD values shows that the transmission coefficients, Kt, has a better performance of up to 4% in comparison to other breakwaters. Also, the reflection coefficients KR and the diffusion coefficients, Kd shows a better performance of about 30% and 55% on average, respectively. However, the model governing equations are non-dissipative. The non-energy conserving of the transmission and reflection coefficients due to wave and breakwater interaction results in dissipation type contribution. The U-shape breakwater with the best performance is compared with the rectangular breakwater with the same cross-section area to investigate the economic advantages of the U-shape breakwater. The transmission coefficients, Kt, of the U-shape breakwater shows a better performance of 5% higher than the rectangular one. The reflection coefficient, KR, is 60% lower for U-shape in comparison to rectangular one; however, the diffusion coefficients, Kd, of U-shape breakwater is 35% higher than the rectangular breakwater. Therefore, we could say that the U-shape breakwater has a better performance than the rectangular one.

• 대한토목학회논문집
• /
• 제28권4B호
• /
• pp.421-428
• /
• 2008

최근 들어 우리나라 전해역에 걸쳐 발생하고 있는 침식은 사회적인 문제가 되어왔다. 하지만, 해안구조물에 의한 기존의 방법으로 해안선을 보호하는 것이 "파랑장에 친화적인가?"라는 관점에서 개선의 여지가 있다. 새로운 형식의 철재형 이안제는 권혁민 등(2007)에 의해 제안되었다. 본 형식은 다수의 파일과 상부에 파랑진행방향과 수평으로 설치된 소파장치로 구성되어 있다. 본 형식은 해수유통원활, 대수심 축조수월, 공기단축 등의 장점이 있다. 본 연구는 소파제로서 철재형 이안제의 상부에 거치가 가능한 이열 조합판의 투과율을 실험적으로 평가했다. 일방향 불규칙파 시스템에 의한 모형실험을 통하여 반사율, 소파율, 투과율에 관하여 분석했다. 실험결과, 파형경사가 클수록 그리고 조합판의 폭-파장비가 클수록 투과율이 작아짐을 보였다. 본 연구는 이열 소파판 조합에 대하여 투과율 산정을 위한 직선식을 제안했다.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.1-6
• /
• 2015

We investigate the propagation characteristics of a pulse laser in a time-of-flight laser range finder (TOF-LRF) system with variations in atmospheric conditions, such as temperature, pressure, relative humidity, and the concentration of $CO_2$. The measurement error of distance related with the group velocity change in the TOF-LRF system is analyzed by considering the refractive index of the standard atmosphere with variations in atmospheric conditions. The dependence of the pulse width broadening induced by chromatic dispersion of the standard atmosphere on the operating wavelength and the initial pulse width of the light sources is discussed. The transmission of air with variations in the relative humidity or the concentration of $CO_2$ is analyzed by using different values of absorption coefficients depending on the operation wavelength of the light source in the TOF-LRF system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.175-175
• /
• 1999

Circumventing problems lying in the conventional lithographic techniques, we devised a new method for the fabrication of nanometer scale metal wires inspired by the unique characteristics of carbon nanotubes (CNTs). Since carbon nanotubes could act as masks when CNT-coated thin Au/Ti layer on a SiO2 surface was physically etched by low energy argon ion bombardment 9ion milling), Au/Ti nano-wires were successfully formed just below the CNTs exactly duplicating their lateral shapes. Cross-sectional analysis by transmission electron microscopy revealed that the edge of the metal wire was very sharply developed indicating the great difference in the milling rates between the CNTs and the metal layer as well as the good directionality of the ion milling. We could easily find a few nanometer-wide Au/Ti wires among the wires of various width. After the formation of nano-wires, the CNTs could be pushed away from the metal nano-wire by atomic force microscopy, The lateral force for the removal of the CNTs are dependent upon the width and shape of the wires. Resistance of the metal nano-wires without the CNTs was also measured through the micro-contacts definted by electron beam lithography. since this CNT-based lithographic technique is, in principle, applicable to any kinds of materials, it can be very useful in exploring the fields of nano-science and technology, especially when it is combines with the CNT manipulation techniques.

• 전자공학회논문지A
• /
• 제28A권1호
• /
• pp.23-29
• /
• 1991

In order to improve the radiation characteristics of the microstrip antenna, microstrip array antenna consisting of one center patch fed by a coaxial probe and several patches directly coupled to the E-plane by microstrip line is analyzed. The equivalent circuit of the array antenna is represented by the conventional transmission line and the various parameters, such as the mdicrostrip line length, the patch length and the feed point location are calculated to improve the radiation pattern for 5-patch array antenna which has the equal patch width. The 5-patch array antenna with the radiation pattern which has low sidelobe level and narrow beam width is fabricated and then the measured results are compared with the computed values and the results of the single patch microstrip antenna too.

• Parasites, Hosts and Diseases
• /
• 제50권3호
• /
• pp.273-276
• /
• 2012

Migratory birds have been suspected as playing a central role in transmission of various trematodes, but few surveys have been undertaken in the Republic of Korea. In the present study, we describe new fauna of microphallid flukes in Korea. Two species of microphallids were found in the intestines of 2 migratory bird species, namely the red necked stints (Calidris ruficollis) and the terek sandpiper (Xenus cinereus), in a coastal area of Gunsan-si, Jeollabuk-do. The microphallids recovered from the latter were 451 ${\mu}m$ in length and 217 ${\mu}m$ in width, and the eggs were very small, 13 ${\mu}m$ by 8 ${\mu}m$. They had the characteristic extracecal vitellaria intruding into the median posttesticular area, belonging to Endocotyle incana. Another microphallids were discovered from both migratory birds, 417 ${\mu}m$ in length and 249 ${\mu}m$ in width. The cirrus was projecting into the genital atrium in form of male papilla, and bounded by a muscular flap, termed pseudogonotyl. They were identified as Spelotrema pseudogonotyla in consideration of the distinctive male papilla and pseudogonotyl. Besides these flukes, Maritrema obstipum and Gynaecotyla squatarolae also were recovered. This paper is in fact the first report on the presence of Spelotrema and Endocotyle in Korea.

• 한국전자파학회논문지
• /
• 제12권3호
• /
• pp.425-431
• /
• 2001

비유전율 ${\epsilon}_{r}$=36인 유전체를 이용한 무선 LAN용 개구 결합 마이크로스트립 원통형 유전체 공진 안테나(DRA)를 설계하고 제작하였다. 우선 급전 소자는 마이크로스트립 전송선로 이론을 이용하여 급전 선로 길이, 선로 폭, 슬롯 길이, 슬롯 폿과 스터브 길이을 계산하였다. 방사 소자는 원통형 유전체 cavity 이론을 이용하여 설계하였다. 제작된 원통형 DRA의 공진주파수는 2.449 GHz이고 VSWR, 반사 손실과 대역폭은 각각 1.009, -47dB 와 70MHz이다. 방사 패턴의 전후방비는 13dB이고 E면과 H 면의 3dB 빔폭은 각각 1$10^{\circ}$과 90$^{\circ}$이다.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1381-1387
• /
• 2018

One dimensional (1D) grating has been fabricated (using focused ion beam) on 50 nm gold (Au) film deposited on higher refractive index Gallium phosphate (GaP) substrate. The sub-wavelength periodic metal nano structuring enable to couple photon to couple with the surface plasmons (SPs) excited by them. These grating devices provide the efficient control on the SPs which propagate on the interface of noble metal and dielectric whose frequency is dependent on the bulk electron plasma frequency of the metal. For a fixed periodicity (${\Lambda}=700 nm$) and slit width (w = 100 nm) in the grating device, the efficiency of SPP excitation is about 40% compared to the transmission in the near-field. Efficient coupling of SPs with photon in dielectric provide field localisation on sub-wavelength scale which is needed in Heat Assisted Magnetic recording (HAMR) systems. The GaP is also used to emulate Vertical Cavity Surface emitting laser (VCSEL) in order to provide cheaper alternative of light source being used in HAMR technology. In order to understand the underlying physics, far-and near-field results has been compared with the modelling results which are obtained using COMSOL RF module. Apart from this, grating devices of smaller periodicity (${\Lambda}=280nm$) and slit width (w = 22 nm) has been fabricated on GaP substrate which is photoluminescence material to observe amplified spontaneous emission of the SPs at wavelength of 805 nm when the grating device was excited with 532 nm laser light. This observation is unique and can have direct application in light emitting diodes (LEDs).

• 한국정보통신학회논문지
• /
• 제12권5호
• /
• pp.879-886
• /
• 2008

본 논문에서는 저전압 차동 신호(Low-Voltage Differential Signaling, LVDS) 전송방식의 응용을 위한 차동 전송 접속 경로의 분석 및 설계 최적화 방법을 제안한다. 차동 전송 경로 및 저전압 스윙 방법의 발전으로 인해 LVDS 방식은 데이터 통신 분야, 고해상도 디스플레이 분야, 평판 디스플레이 분야에서 매우 적은 소비전력, 개선된 잡음 특성 및 고속 데이터 전송률을 제공한다. 본 논문은 차동 유연성 인쇄회로 보드(flexible printed circuit board, FPCB) 전송선에서 선폭, 선두께 및 선 간격과 같은 전송선 설계 변수들의 최적화 기법을 이용하여 직렬 접속된 전송선에서 발생하는 임피던스 부정합과 신호왜곡을 감소시키기 위해 개선 모델과 새로이 개발된 수식을 제안한다. 이러한 차동 FPCB 전송선의 고주파 특성을 평가하기 위해 주파수 영역에서 전파(full-wave) 전자기 시뮬레이션, 시간영역 시뮬레이션 및 S 파라미터 시뮬레이션을 각각 수행하였다. $17.5{\mu}m$과 $35{\mu}m$의 전송선의 경우, 전극 폭에서의 약 10% 변화가 차동 임피던스에서의 약 6%와 5.6%의 변화를 각각 보였으나, 전송선 간 간격은 차동 및 특성 임피던스에서의 영향을 주지 않음을 확인하였다. 또한 전송선 간격이 증가할수록 상호 인덕턴스 및 커패시턴스가 감소하기 때문에 누화 잡음을 감소시키기 위해 신호 전송선간의 간격을 $180{\mu}m$ 이상 유지 해야함을 확인하였다.

• 한국산림과학회지
• /
• 제100권2호
• /
• pp.154-164
• /
• 2011

본 연구는 우리나라 험준한 급경사 지형의 단목중심의 목재생산시스템 등에 적합하고 사방사업, 임도사업 등의 다양한 산림작업에 유용하게 활용할 수 있는 다목적의 반궤도식 산림작업차 개발을 목적으로 실시하였다. 산림작업차량의 기본 차체는 최소회전반경 설계기준과 작업도 폭을 고려하여 차체프레임부의 총길이는 5,750 mm, 차체의 폭은 1,900 mm, 적재부의 적재용량은 약 $2.5m^{3}$으로 설계 제작하였다. 동력원은 3,400 rpm의 최대 96마력 출력의 엔진을 선정하였으며, 유압펌프는 2개의 주펌프와 2개의 보조펌프로 나누어 선정하고, 주펌프는 전후좌우 4개의 주행용 유압모터에 사용하고, 보조펌프는 각종 작업기에 사용하도록 설계 제작하였다. 동력전달방식은 HST(Hydro-Static Transmission) 시스템을 적용하였고, 주행부는 조향가능한 전방 고무바퀴와 무한 궤도형으로 회전하는 후방 크롤러로 설계 제작하고, 조향방식은 애커만 조향방식을 채택하였다. 주행조작부는 일반 자동차의 운전 및 운전석 형태로 설계 제작하였으며, 보조장치로 윈치와 로그그래플 및 아웃트리거를 장착하였다. 시작기의 공차시 임도의 주행속도는 저속 5.3 km/hr, 고속 7.7 km/hr로 나타났다.