• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.15-23
• /
• 2024

In order to avoid the high observability due to the cavity resonance or electromagnetic wave leakages from the bridge of a battleship or the cockpit of an aircraft, this paper presents a transparent conductive oxide coated structure to prevent the incoming/outgoing electromagnetic waves. Currently, most of the RCS reduction technologies were focused on radar absorbing material such as paints based on conductive or magnetic materials in the fuselage, and there is not much research on countermeasures for achieving the low observability of materials that required optical transparency in actual weapon systems. In this study, the transmission/reflection and absorption performance of the ITO coated structure according to the change of the surface resistance of the transparent conductor were analyzed. Finally, the relationship between the electromagnetic and optical characteristics was established through fabrication and measurement.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.24-30
• /
• 1998

A directly coupled Boundary Element and Finite Element Model was applied to the dynamic analysis of a coupled acoustic silencer with vibratory wall. In this cupled BEM-FEM muffler model, the BEM model was used to discretize the acoustic cavity and the FEM model was used to discretize the vibratory wall structure. Then the BEM model was coupled with the FEM model. The results of the coupled BEM-FEM model for the dynamic analysis of the simple expansion type reactive muffler configurations with flexible walls were verified by comparing the predicted results to analytical solutions. In order to investigate the effects of the muffler's structural flexibility on its transmission loss(TL) characteristics, the results of the coupled BEM-FEM model in conjunction with the four-pole parameter theory were utilized. The muffler's TL characteristics using the BEM-FEM coupled model with flexible walls as compared to other muffler configurations was studied. Finally the muffler's TL values with respect to different wall's thickness are predicted and compared.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1097-1100
• /
• 2003

Tunable thermo-optic filter for WDM system was designed and fabricated. The basic structure of the filter was a Fabry-Perot resonator and the center cavity layer was poly-Si. Quardraple layers of low and high refractive index materials were used as DBR mirrors. Tuning and transmission efficiencies was measured and compared with the simulation results. Tuning range of 9.4 nm can be obtained by 64.7$^{\circ}C$ temperature changes and tuning efficiency was 0.144nm/K. The filter is to be assembled onto the micro optical bench with fiber optical path.

• Applied Microscopy
• /
• 제28권2호
• /
• pp.159-170
• /
• 1998

The glandular secretory system of the capitate gandular trichomes in leaf of Thymus quinquecostatus Celakovsky was examined by transmission electron microscope. The glandular trichome was consisted of three cell layers; an basal cell layer, a stalk cell with single-celled intermediate layer and a discoid secretory layer with thickened cuticle. The secretory cell was dense, rich in mitochondria, rER, plastds, Golgi complex and had many vesicular structure. Typical plastids with reticulate body and plastoglobule were present in glandular trichome. The tytoplasm of secretory cell was filled with osmiophilic secretory materials. The secretory vesicles, originated from Golgi complex, appeared as membrane bounded vesicles and secreted to the outer wall surface. The presences of well developed rER, mitochondria, Golgi complex, and membrane-bounded vesicles fused with plasmalemma in the secreting cells indicate that the granulocrine mechanism of secretion was occurring in T. quinquecostatus. Subcuticular cavity was developed between the cuticular layer and the secretory cell wall, and it formed above the secretory cell upon separation of cuticle-wall.

• Smart Structures and Systems
• /
• 제8권1호
• /
• pp.93-105
• /
• 2011

This paper presents a flexible low-profile antenna sensor for fatigue crack detection and monitoring. The sensor was inspired by the sense of pain in bio-systems as a protection mechanism. Because the antenna sensor does not need wiring for power supply or data transmission, it is an ideal candidate as sensing elements for the implementation of engineering sensor skins with a dense sensor distribution. Based on the principle of microstrip patch antenna, the antenna sensor is essentially an electromagnetic cavity that radiates at certain resonant frequencies. By implementing a metallic structure as the ground plane of the antenna sensor, crack development in the metallic structure due to fatigue loading can be detected from the resonant frequency shift of the antenna sensor. A monostatic microwave radar system was developed to interrogate the antenna sensor remotely. Fabrication and characterization of the antenna sensor for crack monitoring as well as the implementation of the remote interrogation system are presented.

• ETRI Journal
• /
• 제45권2호
• /
• pp.338-345
• /
• 2023

A filtering power divider based on air-filled substrate-integrated waveguide (AFSIW) technology is proposed in this study. The AFSIW structure is used in the proposed filtering power divider for substantially reducing the transmission losses. This structure occupies a large area because of the use of air as a dielectric instead of typical dielectric materials. A filtering power divider provides power division and frequency selectivity simultaneously in a single device. The proposed filtering power divider comprises three AFSIW cavities. The filtering function is achieved using symmetrical inductive posts. The input and output ports of the proposed circuit are realized by directly connecting coaxial lines to the AFSIW cavities. This transition from the coaxial line to the AFSIW cavity eliminates the additional transitions, such as AFSIW-SIW and SIW-conductor-backed coplanar waveguide, applied in existing AFSIW circuits. The proposed power divider with a second-order bandpass filtering response is fabricated and measured at 5.5 GHz. The measurement results show that this circuit has a minimum insertion loss of 1 dB, 3-dB fractional bandwidth of 11.2%, and return loss exceeding 11 dB.

• 한국광학회지
• /
• 제22권4호
• /
• pp.179-183
• /
• 2011

근적외선 대역에서 동작 가능한 가변파장레이저 구현을 위하여 브래그 격자와 반도체 광증폭기로 구성된 외부 공진기 형태의 레이저를 제작하였다. 폴리머 광도파로는 굴절률이 1.462, 1.435 인 ZPU 폴리머를 이용하여 제작되었다. 근적외선 파장에서 반사를 일으키는 브래그 격자의 제작을 위해서는 주기가 875 nm 로서 비교적 크고 제작이 손쉬운 3차 브래그 격자를 이용하였다. 폴리머 광도파로 브래그 반사기를 이용하여 제작된 근적외선 외부공진 레이저는 850 nm 파장에서 0 dBm의 출력 파워와 0.2 nm의 20-dB bandwidth, 40 dB 이상의 Side Mode Suppression Ratio을 가지는 단일 모드 레이저 특성을 보였다.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1300-1305
• /
• 2014

근접장 마이크로파 현미경의 핵심 부품인 H-형태 소형 개구를 가진 도파관 탐침에 대해 등가회로를 표현하고 해석하였다. 파장에 비해 작은 사각형 또는 원형의 소형 개구는 유도성 성분인데, 여기에 리지 구조를 부착하는 것은 용량성 성분을 연결하여 이로 인해 투과 공진을 일으키는 것으로 볼 수 있다. 이러한 해석을 입증하기 위해 리지가 있는 소형 개구에서 용량 성분에 해당되는 리지 부분을 분리하여 대략 반파장 떨어진 지점에 세워 두고 구한 등가회로적 표현에 의한 계산 결과와 전자파 해석에 의한 계산 결과와 비교하여 거의 일치된 모습을 확인하였다. 또한, 도파관 탐침을 제작하여 반사손실을 측정하고, 계산 결과의 정확성을 확인하여 이론의 타당성을 검증하였다.

• 한국광학회지
• /
• 제25권1호
• /
• pp.38-43
• /
• 2014

두 파장 레이저를 구현하기 위해서 폴리머 광도파로 브래그 격자와 초발광 LED로 구성된 외부 공진 구조의 레이저를 제작하였다. 대형 립(oversized rib) 구조의 광도파로와 폴리머 광도파로 브래그 격자는 각각 유효굴절률법과 전송행렬법을 이용하여 설계하였으며, 서로 다른 격자 주기를 가지는 폴리머 광도파로 브래그 격자는 이중 노광 레이저 간섭법을 이용하여 제작하였다. 브래그 격자의 반사율 변화에 따른 외부 공진 레이저의 특성을 보기 위해 2 mm의 고정된 길이를 가지며 537 nm의 주기를 갖는 브래그 격자와 0.5 mm에서 6 mm까지 여러 가지 길이를 가지며 540 nm의 주기를 갖는 브래그 격자를 제작하였다. 격자 주기가 537 nm와 540 nm인 브래그 격자의 길이가 각각 2 mm와 2.2 mm일 때 제작된 두 파장 레이저는 1554 nm 파장과 1564 nm 파장에서 0 dBm에 가까운 출력 파워를 보이며, 45 dB이상의 SMSR(side mode suppression ratio)와 0.2 nm의 20-dB 대역폭 특성을 가짐을 확인하였다.

• 원예과학기술지
• /
• 제32권5호
• /
• pp.607-613
• /
• 2014

Calcium has been associated with improved cold tolerance in many crops. The aim of this study was to investigate the changes in leaf cell $Ca^{2+}$ distribution and cell organelle ultrastructure of loquat (Eriobotrya japonica Lindl.) plants in response to cold stress at $-3^{\circ}C$, using transmission electron microscopy (TEM). Two loquat accessions, Zaozhong 6 (a commercial cultivar) and oakleaf loquat (a wild relative) were used. Cold tolerance, as measured by leaf browning rate, was higher in oakleaf plants, and calcium treatment improved cold tolerance in both species. Cold stress first induced inward transport of $Ca^{2+}$ from the intracellular space. Then, the imported $Ca^{2+}$ was aggregated around the chloroplast membrane, finally entering the chloroplast. This pattern of $Ca^{2+}$ distribution in leaf cells occurred earlier in Zaozhong 6 than in the wild loquat. With increasing time of cold exposure, the chloroplast membranes of Zaozhong 6 leaves were damaged, blurred and even disappeared, while those of wild oakleaf loquat leaves maintained their structure longer. In Zaozhong 6, cold stress induced a clear cavity between poorly structured granal thylakoids and vesicles appearing inside the chloroplast, while in oakleaf leaves cold stress had little effect on the ultrastructure of chloroplasts (although chloroplast membranes looked blurred). Loquat leaves accumulated free calcium ions around chloroplasts in response to cold stress, with earlier calcium accumulation occurring in the cold-sensitive cultivar Zaozhong 6 than in wild oakleaf loquat. These results demonstrate that these two loquat species have differences in both cold tolerance and calcium accumulation dynamics.