• 제목/요약/키워드: Transmission(TM)

검색결과 92건 처리시간 0.031초

Optical Power Transfer of Grating - Assisted Directional Coupler with Three - Guiding Channels : TM modes Case

  • Ho, Kwang-Chun;Ho, Kwang-Soo
    • Journal of the Optical Society of Korea
    • /
    • 제8권4호
    • /
    • pp.149-155
    • /
    • 2004
  • Newly developed modal transmission-line theory(MTLT) is used to analyze rigorously the optical power distribution in grating-assisted directional couplers(GADCs) with three guiding channels. By defining a novel coupling efficiency ${\eta}$ amenable to the rigorous analytical solutions of modal transmission-line theory, we explicitly evaluate the power coupling and distribution of TM modes. The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the grating period, the duty cycle, and the operating wavelength.

LAN 과 MODEM을 이용한 ECG 원격 진단 시스템 구현 (Design for the Remote ECG Diagnosis System using LAN and MODEM)

  • 안성혁;이윤
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1997년도 춘계학술대회
    • /
    • pp.171-175
    • /
    • 1997
  • We have developed a remote diagnosis system using the LAN and MODEM which enables a routine check for a patient remotely. We used $LabVIEW^{TM}$ as the programing development tool and DAQ (Data Aquisition) board from National Instrument for data aquisition. The LAN card and MODEM are used for the transmission of patient's data. A patient data are aquired by DAQ board and signal processing is done by $LabVIEW^{TM}$, which is a graphical prgamming language. Two methods for the data of transmission. One is the Client-Server model using TCP/IP (Transmission Control Protocol / Internet Address) in the LAN (Local Area Network) Another is using MODEM to transmit the measured data from a patient. In this case, the data transmission is accomplished by the FTP (File Transfer Protocol).

  • PDF

비대칭 격자구조에 기초한 플라즈마 편광 빔 분리기의 구현 (Implementation of Plasmonic Polarization Beam Splitter based on an Asymmetric Grating Profile)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제24권2호
    • /
    • pp.155-160
    • /
    • 2024
  • 편광 선택적 빔 분리 격자는 수많은 광학 정보처리 시스템에서 널리 사용되고 있다. 본 논문에서는 고효율 플라즈마 편광 빔 분리기 (PBS)를 설계하기 위하여 Littrow 구조에서 Ag 금속 층으로 구성된 소자를 구현하였다. 구현한 PBS는 투과되는 0차 TE 편광과 반사되는 0차 TM 편광에서 높은 회절효율을 달성할 수 있도록 격자깊이 및 격자 비율을 정확한 모드 전송선로 이론 (Modal Transmission-Line Theory)을 사용하여 최적화하였다. 최적화된 결과로부터 PBS는 입사 파장과 각도에 대한 광대역 특성의 장점을 가지고 있으며, TE, TM 편광 모두에 대하여 95% 보다 높은 효율을 나타내었다. 그러므로, 높은 흡광비를 갖는 이 고효율 PBS 광대역 격자는 우수한 광 회절 장치로 사용될 수 있다.

근접하는 도체 평행 평판의 슬릿을 통한 전자파 투과 (Electromagnetic Transmission through Slits in Two Adjacent Conducting Parallel-Plates)

  • 이종익;고지환;조영기
    • 한국전자파학회논문지
    • /
    • 제20권1호
    • /
    • pp.83-90
    • /
    • 2009
  • 본 논문에서는 상호 평행하는 두 개의 도체 평판의 슬릿을 통한 전자파 투과 문제를 고려하였다. TM 편파된 평면파가 슬릿에 입사되었을 때 각 슬릿의 등가 자류를 미지수로 하는 결합 적분방정식을 유도하고 모멘트 방법으로 풀어 수치해석하였다. 슬릿의 폭, 도체 평행 평판의 간격, 평면파의 입사각, 슬릿간 변위 등에 따른 슬릿을 통해 투과된 전력의 변화를 계산하였다. 두 슬릿간 변위가 반 파장의 정수배에 근접할 때 투과 공진(최대 전력 투과)현상이 관찰되었다. 슬릿의 폭과 도체판 간격이 파장에 비해 매우 좁은 경우 투과 전력의 최대치는 슬릿의 폭과 입사각도에 무관하게 일정함을 확인하였다. 또한, 제안된 구조에서 일어나는 투과 공진 현상의 원리를 단순화된 구조와 등가회로를 통해 설명하였다.

MTLT를 이용한 광 방향성 필터의 설계 (Rigorous Design of Optical Directional Filters using MTLT)

  • 박재서;홍권의;호광춘
    • 전기전자학회논문지
    • /
    • 제5권2호
    • /
    • pp.128-135
    • /
    • 2001
  • 모드 전송선로 이론(MTLT: Modal Transmission-Line Theory)을 사용하여 방향성 결합기로 구성된 광 파장 필터를 설계하고 그 특성을 정확히 분석하였다. 전형적인 평면 구조형 결합기가 협대역 필터를 구현하기 위하여 이용되었으며, 테이퍼형 방향성 결합기가 광대역 필터를 구현하기 위하여 채택되었다. 협대역 필터의 경우 TE/TM 모드는 ${\lambda}=1.303{\mu}m$$1.1496{\mu}m$에서 최대 결합효율을 나타냈으며, 그 대역폭은 각각 30nm와 10nm로 나타났다. 더욱이, ${\lambda}=1.55{\mu}m$에서 동작하는 광대역 필터의 경우 TE/TM모드의 결합길이를 $183{\mu}m$$178{\mu}m$로 선택하였을 때 각각 저지대역(stop-band)과 통과대역(pass-band) 필터특성을 나타내었다.

  • PDF

두경부암 환자 방사선 치료 시 BinkieRTTM(구강용 고정장치)에 대한 유용성 평가 (Evaluating the usefulness of BinkieRTTM (oral positioning stent) for Head and Neck Radiotherapy)

  • 이경진;손상준;임경달;김찬용;이제희
    • 대한방사선치료학회지
    • /
    • 제34권
    • /
    • pp.21-30
    • /
    • 2022
  • 목 적: 본원에서 방사선치료를 받는 두경부암 환자들에게 적용하기 위하여 도입한 구강용 고정장치 BinkieRTTM의 구강 내 재현성을 평가하고 기존 고정장치와의 재질과 선량 비교를 통해 그 유용성을 평가하고자 한다. 대상 및 방법: BinkieRTTM를 사용하여 치료한 두경부암 환자 24명을 대상으로 혀 재현성 평가를 위해 치료계획용 CT와 치료 중 3일 간격으로 촬영된 CBCT영상에 혀를 그린 후 DSC와 중심축 이동값을 분석하였다. 또한 BinkieRTTM를 사용하는 경우와 다른 종류의 구강 고정장치(mouth piece, paraffin wax)를 사용했을 때 선량 분포측면에서 혀에 조사되는 선량을 비교하였다. 이를 위해 상악에 위치한 종양 치료를 받는 환자들과 편측 두 경부암 환자들을 각 10명씩 선정하고 전산화 치료 계획 시 혀에 조사되는 선량을 확인하였다. 마지막으로 재질 평가 측면에서는 임상에서 혀를 치료부위 반대 방향으로 보내 고정하는 목적으로 많이 사용하는 Paraffin Wax나 Putty와의 비교를 통하여 BinkieRTTM의 단순 물질 특성을 알아보기 위해 전산화 치료 장비로 Mass density 및 상대전자밀도 등을 확인하고, 팬텀과 이온챔버를 이용하여 Transmission Factor를 측정하였다. 결 과: BinkieRTTM를 사용 시 DCS (n=144) 의 평균은 0.8 ± 0.07, 95% 신뢰구간은 0.79~0.82 로 나타났고, 빈도분포 분석 결과는 왜도 -0.8, 첨도 0.61 로 나타났다. 치료 기간 중 혀 중심축 이동에 대한 편차를 분석하기 위해 LR, SI, AP 방향 이동에 대한 95% 신뢰구간과 편차의 이상값인 0에 대한 일표본 t검정을 실시하였다.(n=144) t검정 결과 LR, SI 방향의 평균은 각각 0.01 ± 0.14 cm(p>.05), 0.03 ± 0.25 cm(p>.05), AP 방향은 -0.08 ± 0.25 cm(p<.05) 로 나타났다. 혀를 치료부위의 반대 방향으로 고정한 경우인 편측 귀밑샘 종양 환자들의 경우 BinkieRTTM를 사용한 환자들의 혀 평균선량은 처방선량 대비 평균 16.92% ± 3.58%, Paraffin Wax 환자 23.99% ± 10.86% 로 BinkieRTTM 사용 시 혀 선량이 비교적 더 낮은 것으로 나타났다(p<.05). 반면, 혀를 아래로 누르는 목적으로 BinkieRTTM를 사용한 환자들 중 비강암 환자의 혀 평균선량은 평균 4.4% ± 5.6%, mouth piece를 사용한 환자들은 5.9% ± 6.8% 로 나타났으나, 통계적으로 유의하지 않았다(p>.05). Paraffin Wax와 BinkieRTTM, Putty의 상대전자밀도 측정 결과 각각 0.94, 0.99, 1.26, Transmission Factor는 각각 0.99, 0.98, 0.96로 나타났다. 결 론: BinkieRTTM의 치료기간에 걸쳐 나타난 혀 DSC분석 결과는 약 0.8, 고정력은 LR, SI 방향으로의 편차가 0에 가까울 정도로 매우 우수하였으며, AP방향의 고정력 또한 평균 0.08 cm 로 우수한 편이었다. 또한 혀를 옆으로 밀어 치료부위 반대 방향으로 고정하는 편측 두경부암 환자의 경우 Paraffin wax나 Putty를 사용하는 것보다 BinkieRTTM를 사용하는 것이 혀에 조사되는 불필요한 선량을 줄일 수 있는 것으로 나타났다. 그러므로 본 실험 결과와 BinkieRTTM의 특성을 적절히 고려하여 두경부암 치료에 적용한다면 혀의 재현성 유지 및 선량 감소에 도움이 되리라 사료된다.

Enhancement of Wireless Power Transfer Efficiency Using Higher Order Spherical Modes

  • Kim, Yoon Goo;Park, Jongmin;Nam, Sangwook
    • Journal of electromagnetic engineering and science
    • /
    • 제13권1호
    • /
    • pp.38-43
    • /
    • 2013
  • We derive the Z-parameters for the two coupled antennas used for wireless power transfer under the assumption that the antennas are canonical minimum scattering antennas. Using the Z-parameter and the maximum power transfer efficiency formula, we determine the maximum power transfer efficiency of wireless power transfer systems. The results showed that the maximum power transfer efficiency increases as the mode number or the radiation efficiency increases. To verify the theory, we fabricate and measure two different power transfer systems: one comprises two antennas generating $TM_{01}$ mode; the other comprises two antennas generating $TM_{02}$ mode. When the distance between the centers of the antennas was 30 cm, the maximum power transfer efficiency of the antennas generating the $TM_{02}$ mode increased by 62 % compared to that of the antennas generating the $TM_{01}$ mode.

Software Engineering Meets Network Engineering: Conceptual Model for Events Monitoring and Logging

  • Al-Fedaghi, Sabah;Behbehani, Bader
    • International Journal of Computer Science & Network Security
    • /
    • 제21권12호
    • /
    • pp.9-20
    • /
    • 2021
  • Abstraction applied in computer networking hides network details behind a well-defined representation by building a model that captures an essential aspect of the network system. Two current methods of representation are available, one based on graph theory, where a network node is reduced to a point in a graph, and the other the use of non-methodological iconic depictions such as human heads, walls, towers or computer racks. In this paper, we adopt an abstract representation methodology, the thinging machine (TM), proposed in software engineering to model computer networks. TM defines a single coherent network architecture and topology that is constituted from only five generic actions with two types of arrows. Without loss of generality, this paper applies TM to model the area of network monitoring in packet-mode transmission. Complex network documents are difficult to maintain and are not guaranteed to mirror actual situations. Network monitoring is constant monitoring for and alerting of malfunctions, failures, stoppages or suspicious activities in a network system. Current monitoring systems are built on ad hoc descriptions that lack systemization. The TM model of monitoring presents a theoretical foundation integrated with events and behavior descriptions. To investigate TM modeling's feasibility, we apply it to an existing computer network in a Kuwaiti enterprise to create an integrated network system that includes hardware, software and communication facilities. The final specifications point to TM modeling's viability in the computer networking field.

Optical Power Transfer of Grating-Assisted Directional Coupler with Three-Guiding Channels: TM modes Case

  • 호광춘
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.126-130
    • /
    • 2003
  • The optical power transfer of TM modes in grating-assisted directional couplers (GADCs) with three-guiding channels is rigorously evaluated by defining a novel coupling efficiency amenable to the rigorous analytical solutions of modal transmission-line theory (MTLT). The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the period, the duty cycle, and wavelength.

  • PDF

시간영역 유한차분법을 이용한 동축선로의 전송특성 및 차폐효과 해석 (Analysis of Coaxial Line Transmission Charactristics and Shielding Effectiveness Using by Finite Difference Time Domain Method)

  • 남상식;윤현보;김정렬;백낙준;우종우
    • 한국전자파학회지:전자파기술
    • /
    • 제6권4호
    • /
    • pp.11-19
    • /
    • 1995
  • 본 논문에서는 시간영역 유한차분법(Finite Difference Time Domain : FDTD) 에 의해서 동축선로의 전달계수와 차폐효과에 대하여 해석하고 그 결과를 모멘트법과 비교하였다. 기존의 여기방법인 TE 나 TM 모드를 대신하여 반사파의 빠른 시간내의 완전흡수를 위하여 TEM 모드로 가정한 Gaussian 펄스를 인가하는 방법을 사용하였다. 또한, 동축선로의 차폐효과를 FDTD를 이용하여 계산 결과와 모멘트법을 이요하여 얻은 결괄와 매우 유사한 결과를 얻었다.

  • PDF