• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.451-455
• /
• 2014

PURPOSE. The most common failure seen in restorations with a zirconia core is total or layered delamination of the ceramic veneer. In the present study, the shear bond strengths between veneering ceramics and colored zirconia oxide core materials were evaluated. MATERIALS AND METHODS. Zirconia discs ($15{\times}12{\times}1.6mm$) were divided into 11 groups of 12 discs each. Groups were colored according to the Vita Classic scale: A3, B1, C4, D2, and D4. Each group was treated with the recommended shading time for 3 s, or with prolonged shading for 60 s, except for the control group. Samples were veneered with 3 mm thick and 3.5 mm in diameter translucent ceramic and subjected to shear test in a universal testing machine with a crosshead speed of 1 mm/min. One-way analysis of variance (ANOVA) and Tukey's HSD tests were used for comparisons of the groups having the same shading times. A paired t-test was used for groups of the same color (3 s/60 s). RESULTS. Among the 11 groups investigated C4 (3 s) had the highest bond strength with a value of 36.40 MPa, while A3 (3 s) showed the lowest bond strength with a value of 29.47 MPa. CONCLUSION. Coloring procedures can affect zirconia/ceramic bond strength. However, the results also showed that bond strengths of all the investigated groups were clinically acceptable.

• Journal of The Korean Astronomical Society
• /
• v.37 no.4
• /
• pp.193-197
• /
• 2004

Anomalies in the far-infrared [C II] 158 ${\mu}m$ line emission observed in the central one-kiloparsec regions of spiral galaxies are reviewed. Low far-infrared intensity ratios of the [C II] line to the continuum were observed in the center of the Milky Way, because the heating ratio of the gas to the dust is reduced by the soft interstellar radiation field due to late-type stars in the Galactic bulge. In contrast, such low line-to-continuum ratios were not obtained in the center of the nearby spiral M31, in spite of its bright bulge. A comparison with numerical simulations showed that a typical column density of the neutral interstellar medium between illuminating sources at $hv {\~} 1 eV $ is $N_H {\le}10^{21}\;cm^{-2}$ in the region; the medium is translucent for photons sufficiently energetic to heat the grains but not sufficiently energetic to heat the gas. This interpretation is consistent with the combination of the extremely high [C Il]/CO J = 1-0 line intensity ratios and the low recent star-forming activity in the region; the neutral interstellar medium is not sufficiently opaque to protect the species even against the moderately intense incident UV radiation. The above results were unexpected from classical views of the [C II] emission, which was generally considered to trace intense interstellar UV radiation enhanced by active star formation.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.14-14
• /
• 2015

Cellular aspects of sooty mold on walnut leaves were investigated by using light and electron microscopy. A black coating developed on the adaxial leaf surface of a walnut tree. No infestations were found on the abaxial leaf surface with peltate glandular trichomes. Light microscopy showed that fungal complexes from the leaf surface were composed of brown conidia and hyphae. Conidia, with longitudinal and transverse septa, were variable in length ranging from 10 to $30{\mu}m$, and commonly found in clusters, forming microsclerotia. Neither epidermal penetration nor hyphal entrance to host tissues was observed. Based on their morphological characteristics, the fungal complexes were assumed to be Capnodium species. An electron-dense melanized layer was present on the cell wall of multi-celled conidia. Concentric bodies in the fungal cytoplasm had an electron-translucent core surrounded by an electron-dense margin with a fibrillar sheath. Chloroplasts without starch granules in the palisade mesophyll cells of sooty leaves had electron-dense stromata and swollen plastoglobuli. These results suggest that the epiphytic growth of fungal complexes can be attributed to the melanized layer and concentric bodies against a water-deficient environment on the leaf surface. Ultrastructural characteristics of the sooty leaves indicate typical features of dark-adapted and non-photosynthetic shade leaves.

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.29-34
• /
• 1990

Single crystals of the peritectic compound MgTiO3 up to 8 m diameter and 100mm long along the [1010] axis. were yon by the travelling solvent floating zone technique using a halogen lamp image furnace. The grown single crystal. which shows a solid solution range at high temperature, exsolves TiO2 component if it is annealed very slowly to room termperature. Grown boules were black but become translucent with pinkish brown color after tempering at 1100 t for 8-10 hours in oxygen atmosphere and showed distint chatoyancy along the (0001) plane. The grown crystal can be used as a new modified cat's eye gemstone. The optimum conditions were as follows ;Sintering temperature of the charge rod, 1300℃ the growth rate, 2-2.5mmh and the composition of the charge rod in molar ratio. MgO : TiO2 : 1:1.05.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.25-26
• /
• 2018

Various concrete material technologies and new materials have been developed in accordance with the advancement of buildings. As part of these new technologies, light transparent concrete, which was invented by Hungarian architect Aron Losonczi and attracted worldwide attention, has a technique of arranging optical fiber inside concrete and transmitting the light from exterior to concrete to show silhouette inside. However, due to many disadvantages, application to the field was limited and commercialization was not easy. In Korea, Light Emotion Friendly Concrete has been developed for commercialization. In order to solve the degradation of construction performance caused by the arrangement of expensive optical fiber, which is pointed out as a disadvantage of translucent concrete, It converts expensive fiber into low cost acrylic rod, easy to arrange, pre-assembled to form and post-cast. Therefore, this study aims to improve the mechanical properties of LEFC and to derive optimal combination.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.93-100
• /
• 2005

Character and illuminance distribution of daylighting is very important for the architectural plan in museum. Those data show bases for exhibition space design with daylighting and play a decisive role in visual perception of articles and space aesthetic. The goal of this paper was therefore to analyze the illuminance distribution in fine art museum with 3 typical girdle skylight types which are devided according to the art of protection from glare. This Experiment proved that they had a striking contrast with regard to the ratio of daylight illumination and illuminance distribution in spite of the same purpose of those development. The girdle skylight with a translucent glass showed the strongest value of the ratio of daylight illumination, but inequable illuminance distribution in space, excepting the area of the wall. However, the latticed reflector of light refracted daylight in the direction of wall and made illuminance distribution very equable in whole space. The ratio of daylight illumination at the girdle skylight which was located at the verge of the ceiling, was highest at the upper part of the wall and was reduced gradually from there, by way of the middle and under part of the wall, to the center of space.

• Journal of the Korean Ceramic Society
• /
• v.54 no.3
• /
• pp.222-227
• /
• 2017

Flake-type micro hollow silica was synthesized by precipitation method using an $Mg(OH)_2$ inorganic template and sodium silicate and ammonium sulfate as the silica precursors. We investigated the effects of the silica precursor concentration on the shape, shell thickness, and surface of the hollow silica. When the concentration of the silica precursor was 0.5 M, the hollow silica had a smooth and translucent thin shell, but the shell was broken. On the other hand, the shell thickness of the hollow silica changed in the range of 12 nm to 18 nm with the increase of the precursor concentration from 0.7 M to 1.1 M. Simultaneously, unintended spherical silica satellites were created on the shell surface. The number of satellites and the size rose according to the increased concentration of silica precursor. The reason for the formation of spherical silica satellites is that the $NH_4OH$ nucleus generated in the synthesis of hollow silica acted as another silica reaction site.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.306-316
• /
• 2018

Monolithic zirconia has been widely used in fixed partial dentures due to high strength and fracture toughness. Nevertheless, the usage of monolithic zirconia in anterior restoration was limited because of opacity. Recently, esthetic monolithic zirconia blocks are developed by improving translucency and using various shading systems. Manufacturer introduces 3M $Lava^{TM}$ Esthetic with increased cubic phase and fluorescent ingredients is more esthetic than previous monolithic zirconia. This case report describes favorable anterior restorations using translucent monolithic zirconia.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.3
• /
• pp.947-971
• /
• 2022

The Electronic Medical Record (EMR) is a valuable source of medical data intelligence in e-health systems. The watermarking techniques have been used to authenticate the owner and protect the EMR from illegal copying. The existing distributive strategies, successfully operated to secure the EMR, are found to be inadequate. Blockchain technology, mainly, is employed by a sharing database that allows the digital crypto-currency. It rapidly leads to the magnified expectations acme. In this excitement, the use of consortium adopting the technology based on Blockchain, in the EMR structure, is found improving. This type of consortium adds an immutable share with a translucent record of the entire business and it is accomplished with responsibility, along with faith and transparency. The combination of watermarking and Blockchain technology provides a singular chance to promote a secured, trustworthy electronic documents administration to share with the e-records system. The authors, in this article, present their views on consortium Blockchain technology which is incorporated in the EMR system. The ledger, used for the distribution of the block structure, has team healthcare models based on dissimilar multiple image watermarking techniques.

• Journal of Microbiology
• /
• v.41 no.3
• /
• pp.224-231
• /
• 2003

The null pigmentation mutant (npgA1) of Aspergillus nidulans was previously characterized by its production of no pigment at any stage of its life cycle, its reduction in hyphal branching, and its delay in the asexual spore development. The chemical composition of the cell wall was also altered in npgA1 mutants that became more sensitive to Novozyme 234$\^$TM/, which is possibly due to a structural defect in the cell wall. To investigate the effects of the cell wall structure on these pleiomorphic phenomena, we examined the ultrastructure of the cell wall in the npgA1 mutant (WX17). Scanning electron micrographs (SEM) showed that after being cultured for six days, the outermost layer of the conidial wall of WX17 peeled off. Although this phenotype suggested that the cell wall structure in WX17 may be modified, examination using TEM of the fine structure of cross-sectioned hyphal wall of WX17 did not show any differences from that of FGSC4. However, staining for carbohydrates of wall layers showed that the electron-translucent layer of the cell wall was missing in WX17. In addition, the outermost layer H1 of the hyphal wall was also absent in WX17. The ultrastructural observation and cytochemical analysis of cell walls suggested that the pigmentation defect in WX17 may be attributed to the lack of a layer in the cell wall.