• 제목/요약/키워드: Transition substitution

검색결과 250건 처리시간 0.027초

Substitutional Effects of Na in the YB$a_2Cu_3O_{7-y}$ Oxide Superconductors

  • Hur Nam Hwi;Ha, Dong Han;Park Yong Ki;Park, Jong Chul
    • Bulletin of the Korean Chemical Society
    • /
    • 제13권4호
    • /
    • pp.425-428
    • /
    • 1992
  • Sodium substituted samples of $Y_{1-x}Na_xBa_2Cu_3O_{7-y}$ for $0.00{\leq}x{\leq}0.16$ were prepared and characterized by X-ray powder pattern, electrical resistivity and magnetic susceptibility measurements, Raman spectroscopy, and idometric titration. The Na substituted compounds have narrow solid solution limits where $0.00{\leq}x{\leq}0.16.$ As the Na concentration increases, the parent orthorhombic structure tends to gradually change to tetragonal. Small changes in the superconducting transition temperature, Tc, are observed in this solid solution region. Raman spectra for the Na phases are virtually identical with that of $YBa_2Cu_3O_7$ except that the Cu(1)-O(4) stretching mode at 504 $cm^{-1}$ and the Cu(2)-O(2,3) bending mode at 340 $cm^{-1}$ for x = 0.16 are slightly shifted. The hole concentrations of the sodium substituted compounds ranged from 0.31 to 0.33 per Cu site are increased with Na content. The substitution of $Na^+$ for $Y^{3+}$ site appears to create oxygen vacancies in the Cu-O chains, causes structural change from orthorhombic to tetragonal, and increases hole concentration in the substituted system.

Improvement of Thermoelectric Properties in Te-Doped Zintl Phase Magnesium-Antimonide

  • Rahman, Md. Mahmudur;Ur, Soon-Chul
    • 한국재료학회지
    • /
    • 제31권8호
    • /
    • pp.445-449
    • /
    • 2021
  • Zintl compound Mg3Sb2 is a promising candidate for efficient thermoelectric material due to its small band gap energy and characteristic electron-crystal phonon-glass behavior. Furthermore, this compound enables fine tuning of carrier concentration via chemical doping for optimizing thermoelectric performance. In this study, nominal compositions of Mg3.8Sb2-xTex (0 ≤ x ≤ 0.03) are synthesized through controlled melting and subsequent vacuum hot pressing method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) are carried out to investigate phase development and surface morphology during the process. It should be noted that 16 at. % of excessive Mg must be added to the system to compensate for the loss of Mg during melting process. Herein, thermoelectric properties such as Seebeck coefficient, electrical conductivity, and thermal conductivity are evaluated from low to high temperature regimes. The results show that Te substitution at Sb sites effectively tunes the majority carriers from holes to electrons, resulting in a transition from p to n-type. At 873 K, a peak ZT value of 0.27 is found for the specimen Mg3.8Sb1.99Te0.01, indicating an improved ZT value over the intrinsic value.

Effect of cement as mineral filler on the performance development of emulsified asphalt concrete

  • Liu, Baoju;Wu, Xiang;Shi, Jinyan;Wu, Xiaolong;Jiang, Junyi;Qin, Jiali
    • Advances in concrete construction
    • /
    • 제10권6호
    • /
    • pp.515-526
    • /
    • 2020
  • Cold-mixed asphalt mixture is a widely recommended asphalt pavement materials with potentially economic and environmental benefits. Due to the reduction of natural non-renewable mineral resources, powder minerals with similar properties are considered as new mineral fillers in asphalt mixtures. This study explored the feasibility of using cement to replace natural limestone powder (LP) in emulsified asphalt concrete modified by styrene-butadiene styrene copolymer. The experimental tests, including compressive strength, Marshall stability as well as moisture susceptibility test, were used to investigate the mechanical properties, the Marshall stability, flow value, as well as the moisture damage. In addition, the influence of material composition on the performance of asphalt concrete is explained by the microstructure evolution of the pore structure, the interface transition zone (ITZ), and the micromorphology. Due to mineralogical reactivity of cement, its replacement part of LP improved the mechanical properties, Marshall stability, but it will reduce the moisture susceptibility and flow value. This is because with the increase of the cement substitution rate, the pore structure of the asphalt concrete is refined, the width of ITZ becomes smaller, and the microstructure is more compact. In addition, asphalt concrete with a larger nominal particle size (AC-16) has relatively better performance.

둥굴레속 식물의 18S rDNA 염기서열의 특성 (Characterization of 18S rDNA in Polygonatum spp. Collections)

  • 윤종선;김익환;박재성;이철희;홍의연;윤태;정승근
    • 한국약용작물학회지
    • /
    • 제14권3호
    • /
    • pp.178-182
    • /
    • 2006
  • 둥굴레 유전자원의 유연관계를 위한 기초 자료를 얻고자 둥굴레속 식물 수집종 10종에서 18S ribosomal RNA를 암호화하는 18S rDNA 영역의 염기서열을 결정하고 그 특성을 분석한 결과를 요약하면 다음과 같다. 둥굴레속 10종의 18S rDNA 영역 전체의 길이는 $913{\sim}914bp$로 비슷하였으나, 총 8개 지점에서 염기의 치환 및 결실에 의한 변이가 발생하였다. 전위는 $T{\rightarrow}C$전위가 4개 지점에서 발생하였고, $A{\rightarrow}G$ 전위가 1개 지점에서 발생하였으며, 전좌는 $C{\rightarrow}A$ 전좌가 1개 지점에서 발생하여 전위가 전좌보다 5배 만큼 발생하였다. 결실은 2개 지점에서 발생하였다. 18S rDNA의 염기의 조성은 adenine $23.09{\sim}23.33%$, guanine $23.33{\sim}23.52%$, thymine $25.60{\sim}25.85%$, cytosine $27.38{\sim}27.79%$로 pyrimidine계가 purine계보다 많았다. 18S rDNA의 A + T 함량은 $48.80{\sim}49.18%$로 평균 48.99%였고, G+C 함량은 $50.82{\sim}51.20%$로 평균51.01%였다. 다중 정렬에 의해 염기서열을 비교한 결과 $99.7{\sim}100%$ 일치하여 종간에 차이가 적었다.

적색 발광 (Y,Al)VO4:Eu3+ 형광체 나노입자의 합성과 발광 특성 (Synthesis and Photoluminescence Properties of Red-Emitting (Y,Al)VO4:Eu3+ Nanophosphors)

  • 서정현;최성호;남산;정하균
    • 한국재료학회지
    • /
    • 제22권2호
    • /
    • pp.103-109
    • /
    • 2012
  • Red-emitting $Eu^{3+}$-activated $(Y_{0.95-x}Al_x)VO_4$ (0 < x $\leq$ 0.12) nanophosphors with the particle size of ~30 nm and the high crystallinity have been successfully synthesized by a hydrothermal reaction. In the synthetic process, deionized water as a solvent and ethylene glycol as a capping agent were used. The crystalline phase, particle morphology, and the photoluminescence properties of the excitation spectrum, emission intensity, color coordinates and decay time, of the prepared $(Y_{0.95-x}Al_x)VO_4:Eu^{3+}$ nanophosphors were compared with those of the $YVO_4:Eu^{3+}$. Under 147 nm excitation, $(Y_{0.95-x}Al_x)VO_4$ nanophosphors showed strong red luminescence due to the $^5D_0-^7F_2$ transition of $Eu^{3+}$ at 619 nm. The luminescence intensity of $YVO_4:Eu^{3+}$ enhanced with partial substitution of $Al^{3+}$ for $Y^{3+}$ and the maximum emission intensity was accomplished at the $Al^{3+}$ content of 10 mol%. By the addition of $Al^{3+}$, decay time of the $(Y,Al)VO_4:Eu^{3+}$ nanophosphor was decreased in comparison with that of the $YVO_4:Eu^{3+}$ nanophosphor. Also, the substitution of $Al^{3+}$ for $Y^{3+}$ invited the improvement of color coordinates due to the increase of R/O ratio in emission intensity. For the formation of transparent layer, the red nanophosphors were fabricated to the paste with ethyl celluloses, anhydrous terpineol, ethanol and deionized water. By screen printing method, a transparent red phosphor layer was formed onto a glass substrate from the paste. The transparent red phosphor layer exhibited the red emission at 619 nm under 147 nm excitation and the transmittance of ~80% at 600 nm.

Cr 치환된 역스피넬 Fe3O4 박막의 자기적 특성 (Magnetic Properties of Cr-Doped Inverse Spinel Fe3O4 Thin Films)

  • 이희정;최승리;이중한;김광주;최동혁;김철성
    • 한국자기학회지
    • /
    • 제17권2호
    • /
    • pp.51-54
    • /
    • 2007
  • 역스피넬 산화물 $Fe_3O_4$에 Cr을 치환하여 얻어지는 $Cr_xFe_{3-x}O_4$ 박막 시료들을 졸-겔 스핀코팅 방법을 이용하여 제작하고 그 구조적, 전자기적 특성들에 대한 측정 및 분석을 수행하였다. X선 회절 측정 결과, Cr 성분비가 증가함에 따라 격자상수가 소폭 감소하는 것이 관측되었다. 이는 Fe 이온에 비해 이온반경이 상대적으로 작은 Cr 이온이 +3의 이온수를 가지고 8면체 자리를 치환하는 것으로 설명 가능하다. 시료들에 대한 진동시료자화를 측정한 결과, Cr 성분비 증가에 따라 포화자화량이 $Fe_3O_4$에 비하여 점차적으로 감소하였는데, 이는 8면체 자리의 $Fe^{3+}(d^5)$$Cr^{3+}(d^3)$ 나타내는 스핀 자기능률 값의 비교를 통하여 설명 가능하다. 또한, 자기저항 효과도 Cr 성분비 증가에 따라 포화자화량과 유사한 추세로 감소하였다. $Cr_xFe_{3-x}O_4$ 박막 시료들의 보자력은 Cr 성분비 증가에 따라 증가함을 보였는데, 이는 $Cr^{3+}$ 이온의 8면체 자리 치환에 따른 자기 이방성의 증가에 기인하는 것으로 해석된다.

Alkali Metal Ion Catalysis and Inhibition in Nucleophilic Substitution Reactions of 3,4-Dinitrophenyl Diphenylphosphinothioate with Alkali Metal Ethoxides in Anhydrous Ethanol: Effect of Changing Electrophilic Center from P=O to P=S

  • An, Jun-Sung;NamKoong, Gil;Kang, Ji-Sun;Um, Ik-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권7호
    • /
    • pp.2423-2427
    • /
    • 2011
  • Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 3,4-dinitrophenyl diphenylphosphinothioate 9 with alkali metal ethoxides (EtOM, M = Li, Na, K) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plot of $k_{obsd}$ vs. [EtOM] is linear for the reaction of 9 with EtOK. However, the plot curves downwardly for those with EtOLi and EtONa while it curves upwardly for the one with EtOK in the presence of 18-crown-6-ether (18C6). Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that the reactivity increases in the order $k_{EtOLi}$ < $k_{EtONa}$ < $k_{EtO^-}$ ${\approx}$ $k_{EtOK}$ < $k_{EtOK/18C6}$, indicating that the reaction is inhibited by $Li^+$ and $Na^+$ ions but is catalyzed by 18C6-crowned $K^+$ ion. The reactivity order found for the reactions of 9 contrasts to that reported previously for the corresponding reactions of 1, i.e., $k_{EtOLi}$ > $k_{EtONa}$ > $E_{EtOK}$ > $k_{EtO^-}$ ${\approx}$ $k_{EtOK/18C6}$, indicating that the effect of changing the electrophilic center from P=O to P=S on the role of $M^+$ ions is significant. A four-membered cyclic transition-state has been proposed to account for the $M^+$ ion effects found in this study, e.g., the polarizable sulfur atom of the P=S bond in 9 interacts strongly with the soft 18C6-crowned $K^+$ ion while it interacts weakly with the hard $Li^+$ and $Na^+$ ions.

전환 비용이 반영된 선택 기반 확산 모형을 통한 신.구 상품간 대체 및 경쟁 예측: 신.구 유료 방송서비스간 대체 및 경쟁 사례를 중심으로 (Forecasting Substitution and Competition among Previous and New products using Choice-based Diffusion Model with Switching Cost: Focusing on Substitution and Competition among Previous and New Fixed Charged Broadcasting Services)

  • 고대영;황준석;오현석;이종수
    • 마케팅과학연구
    • /
    • 제18권2호
    • /
    • pp.223-252
    • /
    • 2008
  • 본 연구에서 우리는 시장 자료가 부족한 상황에서 개인레벨과 총량레벨 모두에서 신상품들과 기존 상품들 간의 동태적 대체, 경쟁을 예측하는데 적합하도록 전환비용 요소가 포함된 신 구상품간 대체 경쟁 예측 선택기반 확산 모형을 제안하고자 한다. 추가적으로, 우리는 제안된 모형을 디지털 케이블 TV, IPTV 등이 포함된 신규 유료 양방향 방송서비스들과 기존의 아날로그 케이블 TV가 대표하는 구 유료 방송 서비스간에 벌어지는 대체 및 경쟁 예측 사례에 적용하여 본 모형의 의의를 밝히며, 또한 관련된 실증적 시사점을 도출하고자 한다. 실증 적용 결과, 유료 방송서비스 시장에 있어선 기존 상품과 전환 비용을 고려하지 않고 신상품 수요 예측을 하는 경우, 초기 확산 속도를 과대 추정하거나 왜곡된 예측 경향이 존재하여, 보다 현실적이고 보수적인 신상품 수요 예측을 위해 이들의 반영이 필요함을 밝혀, 본 연구에서 제안된 모형의 의의를 확인할 수 있었다. 또한, 제안된 모형이 S자 곡선을 미리 가정하기보다, 실증 대상의 속성이 소비자의 상태전환에 미치는 영향의 정도에 따라 유연한 형태의 총량시장 성장 곡선을 도출함을 확인하였다. 실증적으로는 여러 가격 조합에 대해 IPTV가 디지털 케이블 TV에 비해 더 선호되어 가입자 확보 면에서 우위에 있을 것임을 확인할 수 있었다. 한편, 기존 상품인 아날로그케이블 TV의 경우 열위의 서비스 속성에도 불구하고, 가격에서의 우위와 높은 전환비용의 존재로 인해 급격한 대체보다 점진적인 대체가 이루어질 가능성이 큼을 알 수 있었다.

  • PDF

전장하에서 PLZTd의 반강유전-강유전 상전이의 동시적 X-선 회절 측정 (Simulataneous X-ray Diffraction Measurements of the Antiferroelectric-ferroelectric Phase Transition of PLZT under Electric Field)

  • 고태경;조동수;강현구
    • 한국세라믹학회지
    • /
    • 제33권11호
    • /
    • pp.1292-1300
    • /
    • 1996
  • PLZT(x/70/30)의 x=7.5, 8.0, 8.5, 10.5 조성에 대하여 전계인가와 동시에 X-선 회절측정을 전계 20kV/cm에 이르기까지 수행하였다. 모든 PLZT는 입방상에 속하였다. x=7.5, 8.0, 8.5에서 PLZT는 4~8kV/cm의 낮은 전계에 이르기까지 반강유전적인 특성을 보였으며 보다 높은 전계에서는 강유전적인 특성을 나타내었다. 온도에 따른 유전상수의 측정에 따르면 x=7.5, 8.0, 8.5 조성에서 PLZT는 완화형 강유전체와 유사하였으며 50-7$0^{\circ}C$에서 확산적인 반강유전-상유전 상전이가 나타났다. 자발분극-전계(P-E) 이력곡선은 이들이 반강유전적인 특성을 가지고 있음을 보여주었다. 매우 넓은 큐리점의 분포는 이들 PLZT의 결정구조에서 La 치환에 의한 양이온 및 빈자리의 무질서도가 상당함을 시사한다. PLZT (10.5/70/30)의 전계에 따른 변형은 매우 미미하였으며 이력현상이 없는 상유전적인 특성을 보였다. 전계인가에 따른 변형률은 La 치환량이 증가함에 따라 감소하였다. PLZT(7.5/70/30)에서 110회절선의 강도는 전계인가에 민감하게 변화하여, [110] 방향에 평행한 자발분극을 가지는 분역이 전계인가로 유도된 PLZT의 강유전상에서 발달된 것처럼 여겨진다.

  • PDF

Hydrothermal Synthesis and Transition Metal Cations Exchange Characterization of Titanium and [Titanium+Alkali Metals] Substituted-11Å Tobermorites

  • El-Korashy, S.A.
    • 대한화학회지
    • /
    • 제48권2호
    • /
    • pp.129-136
    • /
    • 2004
  • 타이테늄과 [타이테늄 + 나트륨 (칼륨)]으로 치환된 11${\AA}$의 토버모라이트 고체가 180 $^{\circ}C$의 수열반응 조건하에서 합성되었고, 이 화합물은 Fe$^{2+},\;Zn^{2+},\;Cd^{2+},\;Pb^{2+}$과 같은 중금속 양이온에 대해서 양이온 교환 성질을 보였다. 이 고체에 흡착된 중금속 양이온은 Fe$^{2+}>Zn^{2+}>Cd^{2+}>Pb^{2+}$의 순서로 그 양이 감소하였고, 10% [타이테늄 + 칼륨]으로 치환된 토버모라이트가 최대값을 보였다. 총 양이온 교환능은 10% [타이테늄 + 칼륨]으로 치환된 토버모라이트와 타이테늄으로만 치환된 토버모라이트에 대해서 각각 71에서 89 meq/100 g와 50에서 56 meq/100 g로 측정되었다. 이 결과는 10% [타이테늄 + 칼륨]치환이 비치환 토버모라이이트 보다 2.4배 이상의 양이온 교환능이 있음을 보여준다. 이는 교환체의 활성자리 수의 증가에 의한 것이다. 합성된 토버모라이트의 격자구조로의 타이테늄과 [타이테늄 + 나트륨 (칼륨)]의 포함은 각각 Ti$^{4+}\;{\Leftrightarrow}\;2Ca^{2+}$와 Ti$^{4+}+2Na^+(K^+)\;{\Leftrightarrow}\;3Ca^{2+}$의 치환에 의한 것이다. 합성과정 중 고체의 결정 격자로의 타이테늄과 [타이테늄 + 나트륨 (칼륨)]의 포함에 관한 메커니즘과 이들 고체에 의한 중금속 양이온 흡수가 연구되었다.