• 한국항공우주학회지
• /
• 제45권3호
• /
• pp.259-267
• /
• 2017

본 연구에서는 카이스트에서 개발된 비정렬격자 기반의 유동 해석자를 이용하여 KARI-11-180 익형, SDM과 천음속 비행체 주변 유동장에 대한 수치해석을 수행하였다. 유동장을 해석하기 위하여 RANS가 수치적으로 풀이되었으며, Roe가 제안한 FDS 방법을 사용하여 비점성 플럭스를 계산하였다. 난류 모델은 SA 모델, SST 모델, ${\gamma}-{\widetilde{Re}}_{{\theta}t}$모델이 사용되었다. KARI-11-180 익형 유동 해석 결과 천이현상을 고려하였을 때 항력 계수가 더 작게 예측되었으며, 계산된 공력 특성은 전반적으로 실험 결과와 잘 일치하였다. SDM의 경우 날개 앞전에서 유동 박리현상이 발생하였으며, 계산된 공력 특성이 EFD 결과와 유사한 경향을 보였다. 천음속 비행체의 경우 자유류 마하수가 0.9일 때 주 날개에서 발생하는 충격파를 성공적으로 포착하였으며, 실험 결과와 해석된 결과 사이의 유사성을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제18권2호
• /
• pp.60-66
• /
• 2015

Conjugate heat transfer analysis was performed to investigate the flow and cooling performance of the high pressure turbine nozzle of gas turbine engine. The CHT code was verified by comparison between CFD results and experimental results of C3X vane. The combination of k-${\omega}$ based SST turbulence model and transition model was used to solve the flow and thermal field of the fluid zone and the material property of CMSX-4 was applied to the solid zone. The turbine nozzle has two internal cooling channels and each channel has a complex cooling configurations, such as the film cooling, jet impingement, pedestal and rib turbulator. The parabolic temperature profile was given to the inlet condition of the nozzle to simulate the combustor exit condition. The flow characteristics were analyzed by comparing with uncooled nozzle vane. The Mach number around the vane increased due to the increase of coolant mass flow flowed in the main flow passage. The maximum cooling effectiveness (91 %) at the vane surface is located in the middle of pressure side which is effected by the film cooling and the rib turbulrator. The region of the minimum cooling effectiveness (44.8 %) was positioned at the leading edge. And the results show that the TBC layer increases the average cooling effectiveness up to 18 %.

• 한국추진공학회지
• /
• 제22권1호
• /
• pp.16-27
• /
• 2018

듀얼 벨 노즐과 확장-굴절(E-D) 노즐을 결합한 형상의 가능성을 확인하기 위해 기초 전산수치해석 연구를 수행하였다. 듀얼 벨 노즐은 한국형발사체 1단 노즐을 기반으로 설계하였고, 그 형상에 확장-굴절(E-D) 노즐 개념을 적용하였다. 입구 조건은 8 화학종 동결유동 해석을 진행하였고, 난류 모델은 k-${\omega}$ SST로 선정하였다. 격자 민감도 해석을 통해 24만개의 최적 격자수를 선정하였다. 해석 결과 듀얼 벨 노즐에 확장-굴절(E-D) 노즐 개념을 적용시 과대팽창으로 인해 듀얼 벨 노즐의 천이고도는 상승하였고, 한국형발사체 1단 엔진에 비해 고고도에서 비추력 이득을 얻을 수 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.407-408
• /
• 2011

Natural boron consists of two stable isotopes 10B and 11B with natural abundance of 18.8 atom percent of 10B and 81.2 atom percent of 11B. The thermal neutron absorption cross-section for 10B and 11B are 3837 barn and 0.005 barn respectively. 10B enriched specific compounds are used for control rods and as a reactor coolant additives. In this work 2 methods for boron enrichment were analysed: 1) Gas irradiation in static conditions. Dissociation occurs due to multiphoton absorption by specific isotopes in appropriately tuned laser field. IR shifted laser pulses are usually used in combination with increasing the laser intensity also improves selectivity up to some degree. In order to prevent recombination of dissociated molecules BCl3 is mixed with H2S 2) SILARC method. Advantages of this method: a) Gas cooling is helpful to split and shrink boron isotopes absorption bands. In order to achieve better selectivity BCl3 gas has to be substantially rarefied (~0.01%-5%) in mixture with carrier gas. b) Laser intensity is lower than in the first method. Some preliminary calculations of dissociation and recombination with carrier gas molecules energetics for both methods will be demonstrated Boron separation in SILARC method can be represented as multistage process: 1) Mixture of BCl3 with carrier gas is putted in reservoir 2) Gas overcooling due to expansion through Laval nozzle 3) IR multiphoton absorption by gas irradiated by specifically tuned laser field with subsequent gradual gas condensation in outlet chamber It is planned to develop software which includes these stages. This software will rely on the following available software based on quantum molecular dynamics in external quantized field: 1) WavePacket: Each particle is treated semiclassicaly based on Wigner transform method 2) Turbomole: It is based on local density methods like density of functional methods (DFT) and its improvement- coupled clusters approach (CC) to take into account quantum correlation. These models will be used to extract information concerning kinetic coefficients, and their dependence on applied external field. Information on radiative corrections to equation of state induced by laser field which take into account possible phase transition (or crossover?) can be also revealed. This mixed phase equation of state with quantum corrections will be further used in hydrodynamical simulations. Moreover results of these hydrodynamical simulations can be compared with results of CFD calculations. The first reasonable question to ask before starting the CFD simulations is whether turbulent effects are significant or not, and how to model turbulence? The questions of laser beam parameters and outlet chamber geometry which are most optimal to make all gas volume irradiated is also discussed. Relationship between enrichment factor and stagnation pressure and temperature based on experimental data is also reported.