• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.560-563
• /
• 1997

Sound intensity method is well known as a visualization technique of sound field and sound propagation in noise control. Sound intensity is a vector quantity that describes the magnitude and the direction of net flow of acoustic energy at a given position. The current measuring method is expensive and difficult to identify the noise source exactly. In this paper, we have studied the noise source identification and the characteristics of noise source of rotary compressor for air conditioner using complex sound intensity method. The new method for instantaneous sound intensity is also proposed and it is useful for transient state and steady state. The criteria of these states select auto correlation coefficient. The advantage, simplicity and economic attribution of this method are verified by analyzing the characteristics of noise source with instantaneous sound intensity compared to mean sound intensity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.70-76
• /
• 2004

High-temperature cylindrical sodium/stainless-steel heat pipes were manufactured and tested for transient as well as steady states. Total length of the heat pipe was 1 m and the diameter was 25.4 mm. Screen meshes of 3 different sizes were used to estimate the effect of mesh size on the thermal performance of the heat pipe. The minimum thermal resistance achieved was as low as 0.02$^{\circ}C$/W for the maximum thormal load of 2 ㎾. The average heat transfer coefficient in the evaporator was about 2,000 ㎾/$m^2$K and those in the condenser region were up to 5 times higher.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.482-486
• /
• 1999

Ultrafast carrier dynamics of LT-GaAs semiconductors was investigated by using time-resolved photoreflectance spectroscopy. We can see that decay dynamics of photoreflectance generated by carriers depends strongly on the excitation wavelength due to the structure distortion of LT-GaAs semiconductors. Ultrafast trapping of excited carriers into deep trap states gives rise to transient photoreflectance decays with a lifetime shorter than 1 ps. Also, the long-lived photoreflectance is attributed to the carriers trapped deeply at point defects. fects.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.25-25
• /
• 2010

The spectroscopy over a region from 3 to 17 ${\mu}m$ based on the tuneable diode lasers (TDLAS) is the most powerful technique for in situ studies of the diagnostics of small molecules. The increasing interest in small molecules especially containing carbon, oxygen, hydrogen, and fluorine containing ones can be fulfilled by TDLAS at 0.0001 cm-1 resolution, because most of these compounds are infrared active. TDLAS provides a means of determining the absolute concentrations of the ground states of stable and transient molecular species, which can be employed for the time dependent studies in sub micro second scale. Information about gas temperature and population densities can also be derived from TDLAS measurements. Collisional energy transfer between the small molecules can be studied with TDLAS. Also, a variety of free radicals and molecular ions have been detected by TDLAS. Since plasmas with molecular feed gases are used in many applications, there are new applications in industrial field. Recently, the development of quantum cascade lasers (QCLs) offers an attractive new option for TDLAS.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.2
• /
• pp.74-80
• /
• 2014

Generator protection device has to detects an internal fault conditions in generator and abnormal operating conditions must be due to the hazards. Loss of excitation may cause generator itself failure as well as serious operating problem in power system, and then requires an appropriate response of generator protection device. Details modeling of generator control system and analysis of transient states in generator are important for optimal operation in power plants. In addition, the fault simulation data are also used for testing the characteristics of IED. In this paper, the hydro generator control system using PSCAD/EMTDC, visual simulation for power systems, was modeled. The generator control system which is composed of generator, turbine, exciter, governor was implemented. The parameters of generator control system model were obtained from field power plant. Loss of excitation simulations were performed while varying the fixed load. Several signals analysis were also performed so as to analyze transients phenomena.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.684-689
• /
• 2000

In this paper, the equations of motion about vehicle, powertrain and brake system were derived. The vehicle has eight degrees of freedom with nonlinear tire model and the powertrain has two degrees of freedom containing engine, torque converter and four speed automatic transmission. The brake system has two states about front and rear brake line pressures. The transient tire model with first order time lag is also subjoined for low speed or stop-and-go simulation. The modeling was derived considering two points - the fidelity and the simplicity. The simulation using this model is similar with real vehicle dynamic behavior and the model is made as simple as possible far fast simulation. It is validated that the derived vehicle model can be applicable to the real time simulation.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.939-944
• /
• 2003

The analysis involves an adaptive grid that is created under a criterion of element categorization of filling states and locations in the total region at each time step. By using an adaptive grid wherein the elements, finer than those in internal and external regions, are distributed at the surface region through refinement and coarsening procedures, a more efficient analysis of transient fluid flow with free surface is achieved. Using the proposed numerical technique, the collapse of a dam is analyzed. The numerical results agree well with the theoretical solutions as well as with the experimental results. Through comparisons with the numerical results of several cases using different types of grids, the efficiency of the proposed technique is verified.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.164-172
• /
• 2001

This paper describes common MPPT(Maximum Power Point Tracking) control algorithm; Constant Voltage Control, P&O(Perturbation and Observation), IncCond(Incremental Conductance), and investigated it\`s efficiency. Though simulation and efficiency evaluation, the steady/transient states characteristics and efficiency of control algorithms are analyzed respectively. Also, two-mode MPPT control to improve on the existing control algorithm. Moreover, is proposed for high efficiency this paper suggests a topology for MPPT measuring efficiency and a method of examination.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.736-745
• /
• 2018

This paper presents an extended state observer (ESO) based direct torque control (DTC) for use in induction motor systems to handle the issues of time delays, load torque disturbances and parameter uncertainties. Direct torque control offers an excellent torque response and it does not require a proportion integration (PI) controller in the current loop. However, a PI controller is still adopted in the outer speed loop to generate the torque reference value, which is a slow method. An ESO based compound control scheme is proposed to improve the response rate and accuracy of the torque reference signal, especially when load torque is injected. In addition, the time delay problem is analyzed and compensated for in this paper to reduce torque ripples. The proposed disturbance compensation technique based direct control scheme is shown to have good performance both in the transient and stable states via simulations and experimental results.

• Journal of Engineering Education Research
• /
• v.16 no.2
• /
• pp.37-49
• /
• 2013

In this paper, articles in full body of JEER in Korea and JEE in U.S. were classified into two categories- Research area and Key words-to endeavor a comparative study of the engineering education research(EER) topics and their temporal changes. In the recent 4 year term, 'Accreditation of Engineering Education' and 'Courses & Curriculum' were the most common key words appearing in JEER and 'Researches on EER' and 'Learner's Factor' in JEE. If we put curriculum/teaching materials/teaching as the input elements and learning/assessment as the output elements for education achievement, JEE demonstrates that many of the research topics have shifted from input to output in the recent years, while JEER research is in the transient stage.