• Transactions on Control, Automation and Systems Engineering
• /
• 제3권3호
• /
• pp.152-158
• /
• 2001

This paper proposes a simple feedforward compensator in order to decrease the amount of undershoots and overshoots on the step response in nonminimum phase systems. The compensator makes the step type input be a ramp input with saturation for 0$\leq$t<${\alpha}$. It is shown in this paper that the compensated system has small amount of undershoot and overshoot at the price of rise time compared to the system without compensator. Also, provided the system is properly stable, the influence of the design parameter ${\alpha}$ on the step response of the nonminimum phase system is investigated in the case of Type A, and Type B undershoot, which gives a guideline for the compensator design.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.82-89
• /
• 2007

여자제어 시스템의 AVR(Automatic Voltage Regulator) 장치는 발전기의 출력 전압을 일정하게 유지시키기 위하여, 여자기의 전압 또는 전류를 발전기 부하 전류 및 전압 변동에 따라 제어하는 역할을 수행한다. 이러한 AVR 장치의 응답성과 제어 특성은 발전기의 부하 변동 또는 과도 응답 상태에서의 출력 특성을 결정하게 된다. 본 논문에서는 고성능 전동기 제어 시스템에 널리 사용되고 있는 PWM 제어 시스템과 부하 변동에 강인하게 동작할 수 있는 과도 응답 보상기를 적용한 고성능 여자 시스템을 제안한다. 과도 응답 보상기는 발전기의 부하 전류 변동에 따라, 여자기의 제어신호를 PID 제어기의 출력에 더하여 빠른 속응성과 안정성을 가지도록 함으로써, 발전기의 출력 전압을 안정적으로 공급할 수 있도록 제어한다. 제안된 고성능 여자 시스템은 컴퓨터 시뮬레이션과 소형 발전기 시스템에 적용된 실험을 통하여 그 성능을 검증하였다.

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.571-577
• /
• 2012

본 논문에서는 소형 무인항공기에 대한 비행제어 시스템을 동적 보상기를 이용하여 설계하였다. 제안된 제어 시스템은 정상상태 오차를 줄이면서 과도응답 특성을 개선하여 고도 변화 및 목표점 통과 명령에 대해 비행 안정성을 확보하고자 하였다. 제안된 비행 제어기는 내부 루프와 외부 루프의 이중 구조로 구성되며, 내부 루프는 PD 제어기를 사용하여 과도응답을 개선하도록 하며 외부 루프는 동적 보상기를 사용하여 과도 응답 및 정상 상태 오차를 개선하도록 하였다. 고도 추종 및 목표점을 통과하도록 하는 비행실험을 통하여 제안된 기법의 성능을 평가하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.242-246
• /
• 2001

The alternated forward multi resonant converter (AT forward MRC) is studied on the transient response and the measured loop gain for stability. The compensator is composed of the error amplifier with 3 poles and 2 zeros. This is optimized through the experiment with HP4194A network analyzer. We are initiated by the thinking of how to make the stabilization from the experimental results of loop gain curves. The loop gain, low frequency gain and gain margin are more improved through the experimental considerations. Also, the transient response is more enhanced effectively.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.126-133
• /
• 2017

The conventional battery charger requires two separate voltage and current compensators to achieve constant current and constant-current-charging profile. This compensator configuration leads to an inevitable transient response during the mode change between the constant current and the constant voltage operation. Futhermore, a tedious and complicated design process is required to consider a widely changing battery voltage and the nonlinear electrical properties of Li-ion battery. This study proposes a single integrated voltage-current compensator of the LLC resonant converter for Li-ion battery charger applications to overcome the aforementioned drawbacks. The proposed compensator is designed to provide a smooth and reliable performance during the entire charging process while providing the reduced design efforts and seamless mode transient response. Several experimental results based on a 300 W prototype converter and its theoretical analysis are provided to verify the effectiveness of the proposed compensator.

• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1198-1205
• /
• 2000

A two-degrees-of-freedom servosystem for step-type reference signals has been preposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. this paper considers robust stability of the servosystem incorporating an observer against both structured and unstructured uncertainties of the plant. A condition is obtained as a linear matrix inequality, under which the servosystem is robustly stable independently of the gain of the integral compensator. This result implies that we can tune the gain to achieve a desirable transient response of the servpsystem preserving robust stability. An example is presented to demonstrate that under the robust stability condition, the transient response can be improved by increasing the gain of the integral compensator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.299-304
• /
• 1991

A novel approach based on a nonlinear compensator is proposed to prevent 'windup', which is caused by the saturation of the actuator and the integration action of the controller. The anti-windup compensator is located between the conventional linear controller, designed neglecting the saturation, and the actuator. It was proven based on the describing function method that, if the closed loop control systems are stable assuming no saturation, then there exist a range of compensator gain which prevents any limit-cycle and hence, guarantees the system stability. The computer simulation results show that the compensator proposed in the manuscript can eliminate unstable limit cycle and improve the transient response.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권4호
• /
• pp.262-267
• /
• 2000

In this paper, the magnitude of undershoot and overshoot in a prototype second order system with one positive real zero is computed by the analytic methods. Also, it will be shown that the peak times of the undershoot and overshoot can be calculated using the impulse and step response of the second order system. Three different cases are investigated: underdamped(p<ζ<1), critically damped(ζ=1) and overdamped(ζ>1) cases. We deal with the undamped(ζ=0) case as a special case of the underdamped. And a compensation method is proposed to reduce undershoots of the nonmininmun phase system using feedforward compensator.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.130-135
• /
• 1998

This paper deals with a position control problem of a hydraulic proportional position control system using a friction compensation control. There are many nonlinearities in hydraulic systems. With only proportional controller, response is slow and steady-state error cannot be compensated properly. Controller designed in this paper achieves fast transient response through the velocity and acceleration feedback and good steady-state response through the friction compensator. A/D and D/A board is employed for data acquisition and manipulation. The experimental results are compared with computer simulation results using Matlab.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.95-100
• /
• 2013

In this paper, we propose an active controller for high-speed pantograph in order to improve the transient response. Electrical power is delivered from a catenary to the train via a pantograph and thus it is very important to regulate the contact force between catenary and pantograph. By regarding the catenary displacement as an unknown disturbance input and analyzing the frequency response from the disturbance to contract force. we present an active controller that utilizes the lead compensator and resonant controller. It is shown by the computer simulation that the substantial improvement in transient response can be achieved by the proposed controller.