• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.567-575
• /
• 2012

A research was conducted to develop a 2-D nonlinear Galerkin finite element analysis of reinforced concrete structures subjected to high temperature with experiments. Algorithms for calculating the closed-form element stiffness for a triangular element with a fully populated material conductance are developed. The validity of the numerical model used in the program is established by comparing the prediction from the computer program with results from full-scale fire resistance tests. Details of fire resistance experiments carried out on reinforced concrete slabs, together with results, are presented. The results obtained from experimental test indicated in that the proposed numerical model and the implemented codes are accurate and reliable. The changes in thermal parameters are discussed from the point of view of changes of structure and chemical composition due to the high temperature exposure. The proposed numerical model takes into account time-varying thermal loads, convection and radiation affected heat fluctuation, and temperature-dependent material properties. Although, this study considered standard fire scenario for reinforced concrete slabs, other time versus temperature relationship can be easily incorporated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.760-767
• /
• 2020

Sustainable growth of hydroelectric power plants is expected in consideration of climate change and energy security. However, hydroelectric power plants always have a risk of water hammer damage, and safety assurance is very important. The water hammer phenomenon commonly occurs during operations such as rapid opening and closing of the valves and pump/turbine shutdown in pipe systems, which is more common in cases of emergency shutdown. In this study, a computational numerical model was developed using the MOC-FDM scheme to reflect the mechanism of water hammer occurrence. The proposed model was implemented in boundary conditions such as reservoir, pipeline, valve, and pump/turbine conditions and then applied to simulate hypothetical case studies. The analysis results of the model were verified using the analysis results at the main points of the pipe systems. The model produced reasonably good performance and was validated by comparison with the results of the SIMSEN package model. The model could be used as an efficient tool for the safety assessment of hydroelectric power plants based on accurate prediction of transient behavior in the operation of hydropower facilities.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.544-553
• /
• 2008

With the development of video editing technology, there are growing uses of overlay text inserted into video contents to provide viewers with better visual understanding. Since the content of the scene or the editor's intention can be well represented by using inserted text, it is useful for video information retrieval and indexing. Most of the previous approaches are based on low-level features, such as edge, color, and texture information. However, existing methods experience difficulties in handling texts with various contrasts or inserted in a complex background. In this paper, we propose a novel framework to localize the overlay text in a video scene. Based on our observation that there exist transient colors between inserted text and its adjacent background a transition map is generated. Then candidate regions are extracted by using the transition map and overlay text is finally determined based on the density of state in each candidate. The proposed method is robust to color, size, position, style, and contrast of overlay text. It is also language free. Text region update between frames is also exploited to reduce the processing time. Experiments are performed on diverse videos to confirm the efficiency of the proposed method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• The Korean Journal of Pharmacology
• /
• v.2 no.1 s.2
• /
• pp.49-69
• /
• 1966

For the purpose of stydying the pharmacodynamic action of methemoglobin, the author made the following experiments: 1. Preparation of hemoglobin and methemoglobin solutions: Red cell suspension from rabbit blood was hemolysed with distilled water and then divided into two portions. One portion was dialysed through cellophane paper and made isotonic with the proper amount of sodium chloride. The second portion was treated with sodium nitrite to convert hemoglobin to methemoglobin, dialysed through cellophane paper and made isotonic. 2. The concentration of methemoglobin in solution, plasma and urine was determined by Horecker and Brackette's method, and that of hemoglobin by the cyanmethemoglobin method. 3. The concentration of methemoglobin and hemoglobin in the plasma and urine of rabbits was measured at several intervals of time after infusion of the above samples. 4. The blood pressure and respiration of rabbits were recorded on a kymograph, and the effects of the samples on them were observed. 5. The effects of the samples on the movements of the in-situ heart and the isolated intestine of rabbits were studied. 6. The kidneys of rabbits were excised 4 to 5 hours after injection of the samples, and histopathological examinations were made. These experiments revealed the following results: 1. When methemoglobin solution was allowed to stand in room air, there was no decrease in the concentration of methemoglobin. 2. When methemoglobin solution was mixed with whole blood and incubated at $37^{\circ}C$, the concentration of methemoglobin decteased gradually. 3. After the infusion of methemoglobin and hemoglobin solutions, the rate of disappearance of methemoglobin in the plasma was more rapid than that of hemoglobin in the plasma. The higher the initial concentration in the plasma, the larger was the rate of disappearance of methemoglobin. 4. The rate of disappearance of methemoglobin was exceedingly rapid for 30 minutes after the infusion. 5. The urinary excretion of methemoglobin was more rapid than that of hemoglobin. 6. It would seem that the circulating blood contains substances which are promptly mobilized in the plasma to reduce methemoglobin to hemoglobin. 7. Moderate amounts of methemoglobin solution caused some rise in the blood pressure and a transient acceleration of the respiration of the rabbits. These effects of methemoglobin were milder than those of hemoglobin. 8. The movements of the in-situ heart and the isolated intestine of rabbits were accelerated by methemoglobin. These accelerating effects were milder than those of hemoglobin. 9. In the kidneys of rabbits treated with methemoglobin solution, hyperemia of the glomeruli, cloudy swelling and hemoglobin deposit in the tubular epithelium, hemoglobin casts in the tubular lumina of the proximal tubules, and interstitial congestion were constantly observed. There was no definite difference between the histological findings in the rabbit kidneys injected with methemoglobin, and those injected with hemoglobin solutions.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.1
• /
• pp.22-30
• /
• 1995

To predict preoperatively the safety of permanent occlusion of an internal carotid artery with $^{99m}Tc$-HMPAO brain single photon emission computed tomography(SPECT) from an objective point of view, Twenty-four patients underwent balloon test occlusion (BTO) of the internal carotid arteries because of neck and skull base tumors. The authors assessed the uptake of both middle cerebral artery territories before and during BTO with $^{99m}Tc$-HMPAO brain SPECT using semiquantitative analysis method and compared the results with other factors(neurologic examination, arterial stump pressure and electroenceph-alogram). Nineteen patients had not experienced neurological deteriorating or any problem during BTO. Their comparative uptakes of the middle cerebral artery territories were 95 to 101% of the pre-BTO state. The remaining five patients showed severe neurologic symptoms such as transient hemiplegia and unconsciousness. Their comparative uptake of the middle cerebral artery territories were 77 to 85% of the pre-BTO state, and were well matched with other factors. $^{99m}Tc$-HMPAO brain SPECT before and during BTO seems to be a simple and objective method for prediction of permanent neurologic deficits when the comparative uptake of middle cerebral artery territories during BTO is lower than 85% of that before BTO.

• Journal of Chest Surgery
• /
• v.32 no.1
• /
• pp.22-26
• /
• 1999

Background: Treatment of adult patent ductus arteriosus(PDA) has many difficulty such as pulmonary hypertension, arterial wall calcification, aneurysmal chage of ductus. We tried to evaluate the effect of surgical interruption of PDA on postopeative change of heart size. Material and Method : From 1987 to 1997 we experienced 30 cases of the ligation of patent ductus arteriosus in adult at the department of cardiovacular surgery in Masan Samsung General Hospital. Result: There were 9 males and 21 females and their ages ranged from 16 to 44 years, with a mean age of 26.1 years. 15 patients had pulmonary hypertension and 9 patients complained of dyspnea with a degree of functional NYHA class III. Operation method was double or triple ligation using Teflon felt. Postoperative complications were wound dehiscence in 3 patients and transient hoarseness in 1 patient. The mean preoperative cardiothoracic ratio was 54.7%, and mean postoperative cardiothoracic ratio was 51.9%. The change of cardiothoracic ratio was more typical in the cases who had congestive heart failure. Their mean preoperative cardiothoracic ratio was 64.8% and the mean postoperative cardiothoracic ratio was 58.5% there was no postoperative deaths. Conclusion: We canclude that the improvement in cardiothoracic ratio may result from surgical intervention of PDA.

• Journal of Yeungnam Medical Science
• /
• v.19 no.2
• /
• pp.99-106
• /
• 2002

Background: Simple ventricular septal defect(VSD) is the most common congenital heart disease. Although closure of VSD is currently associated with a relatively low risk, experience with younger and smaller infants has been variably less satisfactory. We assessed the results of surgical closure of VSD in infant. Materials and Methods: Between 1996 and 2000, 45 non-restrictive VSD patients underwent patch repair and retrospective analysis was done. Patients were divided into two groups based on weight: group I infants weighed 5kg or less(n=16), and group II infants weighed more than 5kg(n=29). Both groups had similar variation in sex, VSD location, aortic cross clamp time and total bypass time. But combined diseases (ASD, PDA, MR) were more in group I. We closed VSD with patch and used simple continuous suture method in all patients. Results: There were no operative mortality, no reoperation for hemodynamically significant residual shunt and no surgically induced complete heart block. As a complication, pneumonia(group I: 2 cases, group II: 2 cases), transient seizure(group II: 2), wound infection(group I: 1, group II: 1), urinary tract infection(group I: 1) and chylopericardium(group I: 1) developed, and there was no significant difference between two groups(p>0.05). Conclusion: Early primary closure with simple continuous suture method was applicable in all patients with non-restrictive VSD without any serious complications.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.1
• /
• pp.15-21
• /
• 2009

Purpose : A method to estimate a real k-space trajectory based on a circuit model of the gradient system is proposed for spiral imaging. The estimated k-space trajectory instead of the ideal trajectory is used in the reconstruction to improve the image quality in the spiral imaging. Materials and Methods : Since the gradient system has self resistance, capacitance, and inductance, as well as the mutual inductance between the magnet and the gradient coils, the generated gradient fields have delays and transient responses compared to the input waveform to the gradient system. The real gradient fields and their trajectory in k-space play an important role in the reconstruction. In this paper, the gradient system is modeled with R-L-C circuits, and real gradient fields are estimated from the input to the model. An experimental method to determine the model parameters (R, L, C values) is also suggested from the quality of the reconstructed image. Results : The gradient fields are estimated from the circuit model of the gradient system at 1.5 Tesla MRI system. The spiral trajectory obtained by the integration of the estimated gradient fields is used for the reconstruction. From experiments, the reconstructed images using the estimated trajectory show improved uniformity, reduced overshoots near the edges, and enhanced resolutions compared to those using the ideal trajectory without model. Conclusion : The gradient system was successfully modeled by the R-L-C circuits. Much improved reconstruction was achieved in the spiral imaging using the trajectory estimated by the proposed model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.769-778
• /
• 2007

In this paper, excitation systems using linear mass shaker (LMS) and active tuned mass damper (ATMD) are presented in order to simulate the wind induced responses of a building structure. The actuator force for the excitation systems is calculated by using the inverse transfer function of a target structural response to the actuator. Filter and envelop function are used such that the error between the wind and actuator induced responses is minimized by preventing the actuator from exciting unexpected modal response and initial transient response. The analyses results from a 76-story benchmark building problem in which wind load obtained by wind tunnel test is given, indicate that the excitation system installed at a specific floor can approximately embody the structural responses induced by the wind load applied to each floor of the structure. The excitation system designed by the proposed method can be effectively used for evaluating the wind response characteristics of a practical building structure and for obtaining an accurate analytical model of the building under wind load.