• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.44-50
• /
• 2002

Theoretical analysis on the transient torsional vibration was started from early 1960's for high power synchronous motor application. As for marine engineering, simulation and measuring techniques of transient torsional vibration have been steadily studied by manufacturer of flexible coupling and designer of four stroke marine diesel engine. In this paper, the simulation method of transient torsional vibration for four stroke marine diesel engine application using Newmark method is introduced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.312.2-312
• /
• 2002

Theoretical analysis of transient torsional vibration was started from early 1960's for high power synchronous motor application. Especially, its simulation and measuring techniques in marine engineering field have been steadily studied by manufacturers of flexible coupling and designers of four stroke marine diesel engine. In this paper, the simulation method of transient torsional vibration of four stroke marine diesel engine using the Newmark method are introduced. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.830-835
• /
• 2002

Theoretical analysis about transient torsional vibration was started from early 1960's for high power synchronous motor application. Especially, its simulation and measuring techniques in marine engineering field have been steadily studied by classification societies and designers of large diesel engine. In this paper, the simulation method of transient torsional vibration of two stroke low speed diesel engine using the Newmark method are introduced.

• 소음진동
• /
• 제4권3호
• /
• pp.353-363
• /
• 1994

The non-preiodic fluctuation of the engine torque appears to be the major source of the torsional vibration of the automotive driveline. The reduction of this torsional vibration hs become a significant problem along with the requirements of higher performance. The shuffle(tip-in, tip-out) is the transient vibration phenomenon of a vehicle which appears at the sudden change of an accelerator under traveling. By executing of an experiment and a simulation using a model, it has become possible to obtain the design parameter of a driveline for the torsional vibration. This paper presents an experimental and theoretical research on the transient vibration phenomenon of a vehicle which appears at the sudden change of an accelerator under traveling. A dynamic model for the automotive driveline was developed, and all parameters of the mmdel were evaluated with experimental data. The results are as follows: (1) The lower the gea ratio of the transmission is, the more the transient vibration phenomenon of a vehicle appears clearly. (2) The transient vibration phenomenon of a vehicle is affected by the design parmeter of the driveline.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.207-214
• /
• 2007

Theoretical analysis on transient torsional vibration was started from the early 1960s for high power synchronous motor application. Particularly. its simulation and measuring techniques in marine diesel engine field have been steadily studied by some classification societies and large marine diesel engine designers. This paper introduces the simulation method on transient torsional vibration of two stroke low speed diesel engine using the Newmark method.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.667-674
• /
• 2014

선박의 추진축계는 외부 변동 부하에 의해서 축계 손상을 일으킬 수 있다. 이러한 추진축계의 동역학적인 특성은 운전 중에 일어나는 공진을 견딜 수 있거나 또는 피하도록 설계 및 최적화 해야 한다. 이러한 공진은 대빙급 선박의 추진시스템의 설계에 요구되는 프로펠러에서 유체역학적인 상호작용에 기인한다. 추진축계는 프로펠러와 대빙 사이의 상호관계로 인한 과도부하와 시스템의 공진에 의해서 진지한 응력을 받게 된다. 이 논문은 대빙이 적용된 극지 연구 선박에서 추진축계의 과도비틀림 진동응답을 검토하고자 한다. 추진축계는 전기모터로 구동되는 원동기, 탄성커플링 기어 및 프로펠러로 구성되어 있다. 이론적인 해석은 프로펠러의 대빙 부하를 기진력으로 과도비틀림진동 해석을 수행하였다. 그리고 실선에서 비틀림 진동을 계측하고 공진점을 확인하고 이를 이용하여 추진축계 한계 설계 토크에 대한 적용된 평가 요소를 국제선급연합 규정과 비교하였다. 전기모터를 갖는 추진축계에서 공진을 초래하는 탄성커플링의 강성 선정의 영향을 검토하였다.

• 한국정밀공학회지
• /
• 제6권4호
• /
• pp.52-60
• /
• 1989

In order to control the transient torsional vibration of rotational shaft system, the torsional stiffness of it has been taken into account in modelling the plant. In this paper the observer and controller has been designed in two ways. One is to consider the torsional stiffness and the other is to idealize the rotational shaft as rigid body. The third order observer considering torsional stiffness shows stable response on computer simulation. When the observer is designed on assumption of the rotational shaft being rigid body, the reduced order observer shows stable response whereas the full order observer shows unstable response.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.658-664
• /
• 2012

This paper presents an investigation into driveline clonk noise of midi-bus. Test was performed for operational acceleration and pressure, torsional vibration of driveline and FRF to TPA. Wavelet analysis was used to study spectral-time characteristics to all measurement data and specially for torsional vibration, lash analysis was carried out. To investigate the path of the clonk in detail, time domain TPA was introduced. With time domain TPA, the contribution of each path for the clonk was estimated by both subjectively and objectively. As a result, Transmission mount part was came to light as the main contributor of issued clonk. This was verified by reinforcing the bracket of transmission side. And 1D torsional nvh performance simulation model was built with measured torsional vibration. The simulation tool was used for prediction of some clonk behavior in tip in-out transient condition.

• Structural Engineering and Mechanics
• /
• 제31권6호
• /
• pp.663-678
• /
• 2009

An exact solution is obtained for forced torsional vibration of a finite class 622 piezoelectric hollow cylinder with free-free ends subjected to dynamic shearing stress and time dependent electric potential at both internal and external surfaces. The solution is first expanded in axial direction with trigonometric series and the governing equations for the new variables about radial coordinate r and time t are derived with the aid of Fourier series expansion technique. By means of the superposition method and the separation of variables technique, the solution for torsional vibration is finally obtained. Natural frequencies and the transient torsional responses for finite class 622 piezoelectric hollow cylinder with free-free ends are computed and illustrated.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.211-216
• /
• 2013

A wind generator system model includes wind model, rotor dynamics, synchronous generator, power converter, distribution line and infinite bus. This paper investigates the low-Voltage Ride-Through capability of PMSG wind turbine in a variable speed. The drive train of a wind turbine on 2-mass modeling can observe the shaft torsional vibration when the low-voltage occur. To reduce the torsional vibration when the low-voltage occur, this paper designs suppression control algorithm of the torsional vibration and implements simulation. The simulation based on MATLAB/SIMULINK has validated at the transient state of the PMSG and an experiment using 3kW simulator has validated the LVRT control.