• 제목/요약/키워드: Transformer failure

검색결과 116건 처리시간 0.022초

비접촉 전원공급 시 2차측 코일 제작을 줄이기 위한 2차측 정류부 효율 개선에 관한 연구 (An Efficiency Improvement of Secondary-Side Rectifier for Minimizing 2nd Coil-Making in Contact-less Power Supply)

  • 유주희;김춘삼;성원기
    • 한국산학기술학회논문지
    • /
    • 제12권3호
    • /
    • pp.1302-1307
    • /
    • 2011
  • 본 논문은 코일 제작 시 고려사항인 1, 2차측 코일 인덕턴스, 턴수, 크기, 두께, 차폐지 등을 고려하여 리쯔 와이어로 나선형 코일을 제작하는데 이때 반자동화 권선기를 사용하게 된다. 1, 2차측 코일 사양을 정하여 코일을 제작할 때 다양한 사양의 리쯔 와이어와 나선형 코일을 필요로 하게 되는데, 이때 제작 비용, 기간, 제작 시 발생하는 불량 등으로 인해 코일 샘플 제작에 어려움이 발생하고 원하는 사양의 코일 품질 관리에도 어려움이 생기게 된다. 이를 개선하기 위해 2차측의 정류부를 개선함으로써 코일 설계 및 제작 시 다양한 코일 제작 사양의 범위를 좀더 포괄적으로 할 수 있으며 제작 시 발생하는 비용을 줄이고, 기간 단축 및 코일의 품질 관리를 개선하고자 한다.

공기압을 이용한 전기설비 침수 방지 장치 개발에 관한 연구 (The development for flooding prevention apparatus of electrical equipment using air pressure)

  • 김기현;전현재;이상익;배석명;이재용
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.281-284
    • /
    • 2008
  • Inundation of substation and ground power equipment breaks out every summer season in low-lying downtown and low-lying shore by localized heavy rain, typhoon and tidal wave. In case inundation excluding the exchanging cost of equipment, it occurs a great economic and social loss owing to recovery time and events of electric shock occur by inundation electrical equipment(Pad-mounted Transformer and Switch). In case of installing the power equipment at flood danger territory, we are necessary to the product development, the product is that water does not come in the inside the power equipment. Product of pressure maintaining are established on the basic frame and sensor operates at the flooding occurrence and is maintained a shutting tightly structure and it is a method. The product which is produced the reliability of the product it confirmed a flooding yes or no from the condition which puts in the water tank and it verified. We estimate that loss cost which is caused by with flooding and the power failure will be diminished if it is addition to advances the reliability evaluation and a security of the flood protection product.

  • PDF

PTP Management Node 기반 시각동기 오류 검출 및 대응 시스템 (PTP Management Node-based Time Synchronization Error Detection and Recovery System)

  • 김윤현;손규정;서영덕;장태규
    • 전기전자학회논문지
    • /
    • 제24권1호
    • /
    • pp.248-253
    • /
    • 2020
  • 본 논문은 PTP(Precision Time Protocol) management node 기반 시각동기 오류 검출 및 대응 시스템을 제안하였다. 기존 IEEE 1588 PTP 시각동기 표준에서 제시되지 않은 새로운 시각동기 마스터 failure 검출 및 대응 방법을 제안하여 시각동기가 적용된 분산 네트워크 시스템의 안정성과 신뢰도를 제고하고, EVM(Evaluation Module)으로 구성된 시각동기 네트워크 모의고장 실험을 통해 본 논문에서 제안한 시스템이 실제 마스터 클락 상에 발생한 시각오류를 검출하고 대응이 가능함을 증명하였다. 본 논문에서 도입한 매니지먼트 장치를 중심으로 기존 슬레이브 장치들의 협조아래 마스터 장치의 시각정보 오류를 검출하고, 대응하는 새로운 시스템 구조를 도출하였고, EVM 기기로 구성된 시각동기 네트워크 모의 고장 실험을 통해 본 논문에서 제안한 시스템의 시각동기 오류 대응에 따른 정밀 시각동기 유지 기능의 타당성을 입증하였다.

경부고속선 절연구간에서 KTX 운행중 모터블럭의 동작특성 분석 (Study on Analysis of Operating Characteristics of Motor Block While KTX is Moving at Neutral Section of Kyung-Bu High Speed Line)

  • 최창현;노영환
    • 전기학회논문지
    • /
    • 제64권10호
    • /
    • pp.1523-1527
    • /
    • 2015
  • Traction power is supplied by three-phase alternating current of 154 kV power grid and electric trains are operated on single phase feeding system. It becomes important to use all the three phases equally and convert them into two-phase electric power (90 degree phase rotation) for traction supply. This is achieved by special transformer from the adjacent traction substation which is separated by a neutral section. Neutral section locations are in front of the substation and between the two substations. The first stage of the Seoul-Busan high-speed railway, design curve radius is larger than 7,000 m and the greatest slope is 25‰. The railway track conditions are evaluated as good enough to install a neutral section at the first stage, but a few factors of coasting operation of the train should be considered at the second stage of Seoul-Busan high-speed railway. The neutral section was located at Kim-cheon substation, which made some neutral section problems produced by the operating train, and the neutral section was moved about 1.5 km to the south toward Dong Dae-gu station due to the track operation condition. Some of the trains which stopped at the existing Kim-cheon Gu-mi station produced another motor block failure after moving the neutral section. In this paper, power quality, system performance and track condition, etc. are suggested to solve the problems.

열화상 이미지 분석을 통한 배전 설비 공정능력지수 감지 시스템 개발 (Identifying Process Capability Index for Electricity Distribution System through Thermal Image Analysis)

  • 이형근;홍용민;강성우
    • 품질경영학회지
    • /
    • 제49권3호
    • /
    • pp.327-340
    • /
    • 2021
  • Purpose: The purpose of this study is to propose a system predicting whether an electricity distribution system is abnormal by analyzing the temperature of the deteriorated system. Traditional electricity distribution system abnormality diagnosis was mainly limited to post-inspection. This research presents a remote monitoring system for detecting thermal images of the deteriorated electricity distribution system efficiently hereby providing safe and efficient abnormal diagnosis to electricians. Methods: In this study, an object detection algorithm (YOLOv5) is performed using 16,866 thermal images of electricity distribution systems provided by KEPCO(Korea Electric Power Corporation). Abnormality/Normality of the extracted system images from the algorithm are classified via the limit temperature. Each classification model, Random Forest, Support Vector Machine, XGBOOST is performed to explore 463,053 temperature datasets. The process capability index is employed to indicate the quality of the electricity distribution system. Results: This research performs case study with transformers representing the electricity distribution systems. The case study shows the following states: accuracy 100%, precision 100%, recall 100%, F1-score 100%. Also the case study shows the process capability index of the transformers with the following states: steady state 99.47%, caution state 0.16%, and risk state 0.37%. Conclusion: The sum of caution and risk state is 0.53%, which is higher than the actual failure rate. Also most transformer abnormalities can be detected through this monitoring system.

태양광전원이 연계된 고압배전선로의 보호협조 평가 방안에 관한 연구 (Evaluation Method for Protection Coordination of PV Systems Interconnected with Primary Feeders)

  • 김병기;김소희;유경상;노대석
    • 한국융합학회논문지
    • /
    • 제2권4호
    • /
    • pp.29-37
    • /
    • 2011
  • 종래의 배전계통에 있어서의 전력조류는 변전소에서 선로말단을 향한 단 방향이었지만, 신에너지전원(분산전원)이 연계된 배전계통의 경우에는 그 출력용량의 여부에 따라 양방향의 전력조류가 발생할 가능성이 있어, 계통운용상 여러 가지의 문제점이 야기될 수 있다. 분산전원은 대규모전원의 보완적 역할과 배전선로 상의 국부적 부하 감당 역할을 부과하여 그의 적극적 활용을 꾀하기 위해서는, 분산전원으로부터 배전계통에 전력을 공급하는 역 조류의 기능을 허용할 수 있는 양방향 보호협조방식의 체제를 확립할 필요가 있다. 따라서 본 연구에서는 분산전원 연계에 따른 보호협조 기본 방안과 부하절체 운전에 따른 보호협조 방안, 변압기결선에 따른 보호협조 방안 등에 대한 알고리즘을 제시하였다. 또한, 이론적인 계산법(대칭좌표법)과 MATLAB/SIMULINK에 의하여 실 계통에서의 양방향 보호협조에 관련된 문제점을 분석하고, 해결방안을 제시하였다.