• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.553-560
• /
• 1997

A fine $\alpha$-Al2O3 powder was prepared by sol-gel process for membrane application. And it was carried out by adding 1.5wt% $\alpha$-Al2O3 powders(mean size : 87 nm) as seeds to the prepared sols and by controlling the heating schedule (the heating rate and the soaking time) to prevent the microstructural change, which occured during $\theta$-to $\alpha$Al2O3 phase transformation. The seeded $\alpha$-Al2O3 particles acted as the heterogeneous nucleation sites for the $\alpha$-Al2O3 nucleation during the transformation of $\theta$- to $\alpha$-Al2O3 and resulted in increasing the driving force of phase transformation to activate the formation of $\alpha$-Al2O3 phase at 82$0^{\circ}C$. By $\alpha$-Al2O3 seeding and controlling of heating condition the phase transformation of $\theta$- to $\alpha$-Al2O3 was accomplished at low temperature and the grain growth process was depressed. Therefore, the unsupported membrane could be fabricated in $\alpha$-Al2O3 . The average diameter of pores in the fabricated membrane was 7 nm and the porosity was 47%.

• 동아시아경상학회지
• /
• 제9권4호
• /
• pp.103-111
• /
• 2021

Purpose - We attempt to provide a background, a review of current development of the digital technologies and their effect on the digital transformation process, and then offer our recommendations for identifying and taking strategic actions to exploit them. More importantly, we also aim to offer important recommendations for policymakers and practitioners how to better advance the innovation system by facilitating the development of digital technologies and take advantage of improvements in digital technologies. Research design, data, and methodology - This study undertakes an extensive and critical review of the digital transformation literature and identifies several important issues with relevant practical examples of best practices in the transition to digital transformation process. Results - This paper finds that digital technologies with strong technological backing have brought technological spillovers to the economy while also generating shocks. Conclusion - To maintain a healthy and developing market order, it is necessary for governments to innovate regulatory models. This study offers several important suggestions for government regulatory innovation that we believe should help to better deploy digital transformation initiatives and enhance the efficiency and effectiveness of government regulation in contributing more to the high-quality and healthy development of the digital economy.

• International Journal of Computer Science & Network Security
• /
• 제23권8호
• /
• pp.199-203
• /
• 2023

Influential trend that widely reflected the software engineering industry is service oriented architecture. Vendors are migrating towards cloud environment to benefit their organization. Companies usually offer products and services with a goal to solve problems at customer end. Because customers are more interested in solution of their problem rather than focusing on products or services. In software industry the approach in which customers' problems are solved by providing services is known as software as a service. However, software development life cycle encounters enormous changes when migrating software from product model to service model. Enough research has been done on the overall development process but a limited work has been done on the factors that influence requirements elicitation process. This paper focuses on those changes that influence requirement elicitation process and proposes a systematic methodology for transformation of software from product to service model in a successful manner. The paper then elaborates the benefits that inherently come along with elicitation process in cloud environment. The paper also describes the problems during transformation. The paper concludes that requirement engineering process turn out to be more profitable after transformation of traditional software from product to service model.

• 산업융합연구
• /
• 제20권1호
• /
• pp.23-33
• /
• 2022

본 연구는 제조기업의 디지털 전환(DX)을 위한 실행모형을 개발하기 위해 진행하였다. 이를 위하여 경영혁신과 디지털전환 과정에 대한 선행연구를 검토하였다. 인터넷 비즈니스의 혁신과정에서 적용된 NEBIC이론과 혁신이론을 기반으로 DX과정모형을 도출하였다. 여기에 최고경영층(TMT)의 추진의지 요인을 포함한 연구모형을 구축하고 이를 검증하기 위해 험자료를 통해 확인하였다. 디지털 전환을 추진하고 있는 중견 제조기업의 구성원을 대상으로 수집된 자료를 기반으로 연구가설을 검증하였다. 회귀분석을 통해 연구모형(기술지식 → 기회인지 → 기대성과 → 실행의지)의 각 단계의 영향관계를 확인하였다. DX과정에 최고경영층의 DX추진의지에 대한 구성원의 인식의 매개효과를 파악하기 위해 위계적 회귀분석을 실시였다. Sobel test 확인결과, 각 단계별 관계에 경영층의 DX추진에 대한 인식이 부분적으로 매개하는 사실을 확인하였다. 본 연구는 중견 제조업의 디지털 전환에 적용 가능한 모형을 제시했다는 점에서 의미가 있다. 또한 혁신연구 및 NEBIC 확장에 대한 경험적 근거를 제공한 것에 가치를 지닌다. 동적특성을 지닌 과정모형에 대한 실증자료의 한계를 극복하기 위해서 종단연구가 필요하며 연구결과의 일반화를 위해 제조업 이외 다양한 분야에서 확장된 실증연구가 요구된다.

• 한국멀티미디어학회논문지
• /
• 제4권4호
• /
• pp.234-332
• /
• 2001

프랙탈 영상 부호화의 새로운 응용 분야인 프랙탈 영역 분할법의 YST방법은 주기점에 의한 라벨 붙이기와 프랙탈 변환에 의한 라벨 수정을 병용한 영역 분할법을 제안하였다. 그러나 이 개선법은 영역 분할의 질적인 개선은 가능하였으나, 여전히 라벨 붙이기와 라벨 수정의 과정에서 중복성이 남아 있다. 이 문제점의 해결방안으로 본 논문에서는 궤도에 따른 라벨 붙이기와 프랙탈 변환의 반복 과정에 관한 제약 조건을 제안한다.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.65-74
• /
• 2004

The inherent strain method is known to be very efficient in predicting the deformation of steel plate by line heating. However, in the actual line heating process in shipyard, the rapid quenching changes the phase of steel. In this study, In order to consider additional effects under phase transformation, inherent strain regions were assumed to expand. Also, when calculating inherent strain, material properties of steel in heating and cooling are applied differently considering phase transformation. In this process, a new method which can reflect thermal volume expansion of martensite is suggested.8y the suggested method, it was possible to predict the plate deformations by line heating more precisely.

• 제어로봇시스템학회논문지
• /
• 제8권1호
• /
• pp.28-36
• /
• 2002

Regarding efficient development of computer graphic animations, lots of techniques for editing or transforming existing motion data have been developed. Basically, the motion transformation techniques follow optimization process. To make the animation be natural, almost all the techniques utilize kinematics and dynamics in constructing constraints for the optimization. Since the kinematic and dynamic structures of virtual characters to be animated are very complex, the most time-consuming part is known to the optimization process. In order to suggest some guide lines to engineers involved in the motion transformation, in this paper, we analyze the computational complexities for typical motion transformation in quantitative manner as well as the possibility for parallel computation.

• Wind and Structures
• /
• 제3권4호
• /
• pp.221-241
• /
• 2000

Structural dynamics usually applies modal transformation rules aimed at de-coupling and/or minimizing the equations of motion. Proper orthogonal decomposition provides mathematical and conceptual tools to define suitable transformed spaces where a multi-variate and/or multi-dimensional random process is represented as a linear combination of one-variate and one-dimensional uncorrelated processes. Double modal transformation is the joint application of modal analysis and proper orthogonal decomposition applied to the loading process. By adopting this method the structural response is expressed as a double series expansion in which structural and loading mode contributions are superimposed. The simultaneous use of the structural modal truncation, the loading modal truncation and the cross-modal orthogonality property leads to efficient solutions that take into account only a few structural and loading modes. In addition the physical mechanisms of the dynamic response are clarified and interpreted.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.12-23
• /
• 1995

In this a set of constitutive equation relevant to the analysis of thermo-elasto-plastic materials with phase transformation during quenching process was presented on the basis of continuum thermo-dynamic. In calculating the transient thermal stresses, temperature between coolant and specimen(SM45C) surface was determined from the heat transfer coefficient. A calculation was made for specimen with 40mm in diameter quenched in coolant from $820^{\circ}C$ and the results are as follow. Stresses at starting point of transformation always show the maximum tensile value. Reverse of stresses takes place after completion of transformation of inner part at specimen.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.79-84
• /
• 1998

It is very difficult to analyze the transient temperature distribution during quenching of the steel because of coupled effects among temperature, structures and stresses. In this paper, using Inoue's equation of evolution and mixture rule, transient temperature distribution is calculated by the finite element method considering latent heat of transformation structure and temperature dependence of physical and mechanical prperties for the 0.45% carbon cylindrical steel bar with 40mm diameter and 20mm height during end-quenching.