• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.84-90
• /
• 1999

The shape of weld nuggest in arc spot welding of 304 stainless steel was found by searching thermal history of a weld joint through a three-dimensional finite element model. The problem consists of one in which the finite element mesh is growing continuously in time in order to accomodate metal transfer in arc spot welding using element rebirth technique. The analysis was performed on the basis of experimental results. The finite element program MARC, along with a few user subroutines, was employed to obtain the numerical results. Temperature-dependent thermal properties, stir effect in weld pool, effect of phase transformation, and the convective and radiative boundary conditions are included in the model. Numerically predicted shape of weld nuggest is compared with the experimentally observed shape.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.99-109
• /
• 2004

This paper proposes precision evaluation method for the positioning error of three-DOF translational parallel mechanism. The proposed method uses conventional CMM as metrology equipment to measure the position of end-effector. In order to obtain accurate measurement data from CMM, the transform relationship between the coordinate system of the parallel mechanism and the CMM coordinate system must be identified. For this purpose, a new coordinate referencing (or coordinate system identification) technique is presented. By using this technique accurate coordinate transformation relationships are efficiently established. According to these coordinate transformation relationships, an equation to calculate error components at any arbitrary position of the end-effector is derived. In addition, mathematical fitting models to represent the position error components in the two-dimensional workspace of the parallel mechanism are also constructed based on response surface methodology. The proposed error evaluation method proves its effectiveness through the experimental results and its application to real three-DOF parallel mechanism.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.698-701
• /
• 2005

This paper examines that is extracted certain information in forest areas within high resolution imagery based on wavelet transformation. First of all, study areas are selected one more species distributed spots refer to forest type map. Next, study area is cut 256 x 256 pixels size because of image processing problem in large volume data. Prior to wavelet transformation, five texture parameters (contrast, dissimilarity, entropy, homogeneity, Angular Second Moment (ASM≫ calculated by using Gray Level Co-occurrence Matrix (GLCM). Five texture images are set that shifting window size is 3x3, distance .is 1 pixel, and angle is 45 degrees used. Wavelet function is selected Daubechies 4 wavelet basis functions. Result is summarized 3 points; First, Wavelet transformation images derived from contrast, dissimilarity (texture parameters) have on effect on edge elements detection and will have probability used forest road detection. Second, Wavelet fusion images derived from texture parameters and original image can apply to forest area classification because of clustering in Homogeneous forest type structure. Third, for grading evaluation in forest fire damaged area, if data fusion of established classification method, GLCM texture extraction concept and wavelet transformation technique effectively applied forest areas (also other areas), will obtain high accuracy result.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제26권1호
• /
• pp.1-14
• /
• 1998

Various numerical methods for the two dimensional shallow water equations have been applied to the problems of flood routing, tidal circulation, storm surges, and atmospheric circulation. These methods are often based on the Alternating Direction Implicity(ADI) method. However, the ADI method results in inaccuracies for large time steps when dealing with a complex geometry or bathymetry. Since this method reduces the performance considerably, a fully implicit method developed by Wilders et al. (1998) is used to improve the accuracy for a large time step. Finite Difference Methods are defined on a rectangular grid. Two drawbacks of this type of grid are that grid refinement is not possibile locally and that the physical boundary is sometimes poorly represented by the numerical model boundary. Because of the second deficiency several purely numerical boundary effects can be involved. A boundary fitted curvilinear coordinate transformation is used to reduce these difficulties. It the curvilinear coordinate transformation is used to reduce these difficulties. If the coordinate transformation is orthogonal then the transformed shallow water equations are similar to the original equations. Therefore, an orthogonal coorinate transformation is used for defining coordinate system. A multigrid (MG) method is widely used to accelerate the convergence in the numerical methods. In this study, a technique using a MG method is proposed to reduce the computing time and to improve the accuracy for the orthogonal to reduce the computing time and to improve the accuracy for the orthogonal grid generation and the solutions of the shallow water equations.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권15호
• /
• pp.6005-6008
• /
• 2014

Aim: To compare recurrence rates of large loop excision of the transformation zone (LLETZ) with those of contour-loop excision of the transformation zone (C-LETZ) in the management of cervical intraepithelial neoplasia (CIN). Materials and Methods: The medical records of 177 patients treated consecutively by LLETZ and C-LETZ for CIN at Rajavithi Hospital between 2006 and 2009 were retrospectively reviewed. Results: Of the 87 women in the C-LETZ group, 2 cases (2.30%) had recurrence compared with 13 cases (14.4%) of the 90 women in the LLETZ group, the higher recurrence rate in the latter being statistically significant (p<0.05). Median times of follow up in the C-LETZ and LLETZ groups were 12 months and 14 months respectively (p>0.05). The C-LETZ group showed less intraoperative bleeding compared to the LLETZ group, but the rate of achievement of single specimens and positive margins were similar in the two groups. Conclusions: The present study demonstrated the superiority of C-LETZ over LLETZ in terms of efficacy; C-LLETZ is associated with a lower recurrence rate and also carries a smaller risk of intraoperative bleeding than LLETZ. The rotating technique still has a potential role in treating precancerous lesions of the cervix.

• 한국빅데이터학회지
• /
• 제7권1호
• /
• pp.139-171
• /
• 2022

빅데이터와 제4차산업혁명은 새로운 형태의 에너지를 낳지 않고 디지털화라는 새로운 기술적 현상을 촉발한 최초의 혁명이다. 디지털트랜스포메이션은 파괴적인 혁신을 야기 시켰고, 각 나라와 주요 기업들은 이에 대한 대응이 필요한 상황이다. 이러한 중요성에도 불구하고, 국내외 실증연구는 미흡한 실정이다. 따라서 본 연구에서는 기업의 디지털트랜스포메이션 추진에 영향을 미치는 요인을 문헌고찰을 통해 발굴하고, 델파이 스터디를 통해 수정 및 보완하여 연구모형을 개발하고 실증 분석하였다. 연구모형은 IDT와 TOE 모델을 결합하여 기술, 혁신, 조직, 환경 등의 주기준과 17개의 하부기준으로 구성되었다. 이를 실증분석하기 위해 국내 디지털트랜스포메이션 추진 주관사 및 협력사의 전문가를 대상으로 AHP의사결정기법을 이용하였다. 디지털트랜스포메이션을 추진하는 기업들은 기업이 속한 집단의 업종 및 기업규모 관점의 특성에 따라 디지털트랜스포메이션 추진에 영향을 미치는 요인들을 고려하여 추진한다면 성공적인 디지털트랜스포메이션의 달성 가능성을 높일 수 있을 것이다.

• 지구물리와물리탐사
• /
• 제19권2호
• /
• pp.84-90
• /
• 2016

신규 센서의 성능과 노후화된 센서의 성능 평가를 하는 것은 지진 감시 및 지진연구에 있어서 매우 중요하다고 할 수 있다. 특히 센서 주파수 응답은 지진자료의 보정을 위해서 필수적으로 사용되고 있다. 이 연구에서는 주파수 스펙트럼비를 이용한 지진 기록계의 보정 방법과 시간영역 대역통과필터(bandpass filter)와 힐버트(Hilbert) 변환을 이용한 지진계 주파수 응답을 계산하는 방법을 제시하고자 하였다. 실내 진동대 실험에서 가속도 센서(CMG-5T 1g, 2g 센서)를 설치하고 제안된 방법으로 센서 주파수 응답스펙트럼을 구하였을 때 좋은 결과를 얻을 수 있었다. 또한 2011년 도호쿠 대지진에 대하여 서울대학교 관측소(SNU)의 STS-2와 ES-T에서 얻어진 자료에 대하여 제안된 방법을 적용한 결과 STS-2 광대역 센서의 저주파수 대역에 대한 주파수 응답을 얻을 수 있었다. 대역통과필터와 힐버트 변환 방법을 이용할 경우, 주파수 스펙트럼비를 이용한 방법보다 신호대 잡음이 낮은 부분에서도 명확한 주파수 응답스펙트럼을 보여주었다.

• 한국컴퓨터정보학회논문지
• /
• 제14권5호
• /
• pp.1-9
• /
• 2009

XML 데이터를 효율적으로 저장하고 질의하기 위하며 많은 기법들이 제안되었다. 이러한 목표를 위한 한 가지 방법은 XML 데이터를 관계형 형식으로 변환하여 관계형 데이터베이스를 사용하는 것이다. 그러나 대부분의 연구가 XML의 내용과 구조만 변환하고 숨겨진 의미적 제약조건을 간과하거나 일부만 적용하였다. 따라서 이 논문에서는 XML Schema로부터 의미적 제약조건의 체계적인 추출 방법과 추출된 의미적 제약조건을 관계형 스키마로 변환할 때에 보존하는 방법을 제안한다. 변환 알고리즘은 XML Schema로부터 의미적 제약조건을 추출하고 보존하는데 이용되며, 추출된 의미적 정보들을 스키마표기법에 따라 재작성하여 어떻게 의미적 제약조건을 보존하는지를 보여준다. 또한 변환하는 동안에 올바른 관계형 스키마를 보증하기 위하여 제약조건 확인에 필요한 의미적 지식을 제공한다. 이 방법에서는 내용, 구조와 함께 무결성 제약조건들은 동시에 유지되며, 또한 저장 중복성을 줄일 수 있다.

• 한국측량학회지
• /
• 제16권2호
• /
• pp.213-223
• /
• 1998

본 논문은 베셀타원체상에서 한반도 일원의 지오이드모델을 개발하기 위한 연구이다. 여러가지의 유용한 데이터를 사용하여 remove and restore technique에 의하여 GRS80 타원체상에서 정밀지오이드고를 계산하였으며, FFT 기법에 의하여 Stokes 적분을 수행하였다. GTOPO30으로부터 표고값을 추출하여 모든 격자점의 위치를 3 매개변수 방법에 의하여 베셀타원체 좌표계로 환산하였으며, 기하학적 방법으로 베셀지오이드고를 계산하였다. 연구 결과 한반도 일원에서의 GRS80 기준의 정밀 중력지오이드모델(KOGGDM33)과 베셀타원체 기준의 지오이드모델 (KOBGDM33)을 얻을 수 있었으며, 베셀타원체상에서의 지오이드고는 용암포의 -91.8 m에서 대한해협의 -39.0 m 에 이르기까지의 점진적인 분포를 보이는 것을 알 수 있었다.