• The Magazine of the IEIE
• /
• v.25 no.6
• /
• pp.69-78
• /
• 1998

프레임 릴레이망을 백본으로 한 LAN과 LAN접속으로 형성되는 기업통신망이 현재 활발히 전개되면서 인터넷을 통한 광고, 전자거래가 중요한 서비스로 진행되고 있다. 국내의 프레임 릴레이 서비스 현황을 살펴보면 KT, 데이콤, 일부기업등에서 프레임 릴레이 교환기를 수입하여 주고객인 기업에 서비스를 제공하고 있다. 이들은 사용자 요구에 의해 주로 LAN과 LAN에 접속된 라우터 등의 종단 시스템간 PVC(영구가상회선: Permanant Virtual Circuit)접속을 통하여 다양한 서비스를 제공하면서 독자적인 기업통신체계를 구축하고 있는 실정이다. 이와같이 사용자 요구로 PVC등록시 프레임 릴레이망과 LAN을 연결하는 링크의 QoS(서비스 질: Quality of Service), 트래픽 파라메터는 수동적으로 설정된다. 현재 국내에서는 프레임 릴레이 교환기 개발은 전무하고 단지 그들을 수입하여 운용하는 수준이며 향후 ATM(비동기 전달모드: Asynchronous Transfer Mode)망의 중요 서비스 연동이 될 프레임 릴레이 기술은 심도있게 연구되고 있다. 향후 고속통신을 제공하는 백본망은 기존의 프레임 릴레이망과 ATM망이 공존할 추세이며 점진적으로 프레임 릴레이망은 사라질 것이다. 이때 ATM 망이 기존의 프레임 릴레이망을 백본으로 한 기업통신망 수용시 원할한 서비스 제공을 위해서는 프레임 릴레이망을 백본으로 채택한 기존의 기업통신망을 ATM망에서 수용시 야기되는 문제점의 제시와 이의 해결은 매우 중요하다고 생각된다. FR/ATM(Frame Relay/ATM)연동시 기업통신망 입장에서는 PVC뿐만 아니라 SVC(교환가상회선: Switched Virtual Circuit)호처리가 수용되어야 한다. 이와같이 PVC와 SVC 수용으로 기업통신망은 통신망의 구성 및 관리가 복잡, 다양해지며, 또 그 기업은 관련된 다양하고 수많은 고객과 접속될 수 있어야 한다. 이때 ATM망을 백본으로 한 공중망이 관련 기업의 사설 정보를 관리하도록 한다는 것은 그 서비스의 이용자에게 보안문제를 제기함은 물론 서비스 이용자가 자신의 망에서 동작하는 여러 서비스를 고객 스스로가 관리하는 것이 바람직하다. CNN(고객망관리 : Customer Network Management)은 이러한 고객에 의한 통신망, 공중망에 대한 부분적 관리 및 서비스에 대한 관리가 이루어 질수 있도록 수행하는 기능이다. 본 논문에서는 ATM망이나 프레임 릴레이망과 ATM 망이 공존시 기업통신망관점에서 야기되는 문제점의 제시와 이의 해결 방안을 살펴보았다. 우선 FR/ATM 연동에서 PVC설정뿐만 아니라 SVC 설정 방법의 연구, 이때 고려된 QoS,트래픽 처리과정을 살펴보았다. 또한 망관리 입장에서 기업통신망 관리자와 ATM망 관리자와의 온-라인 서비스를 제공하기 위해서는 변화된 통신망 차원서의 확장된 Managed Object(MO)를 근간으로한 체계적인 CNN-NMS(CNM-Network management System)연동을 살펴본후 결론에서는 추후 계속연구 및 조사 되어야 할 항목을 기업통신망 입장에서 서술하여 보았다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.160-164
• /
• 1995

정보통신 시스템의 고속/고밀도화 요구에 따라 개발되고 있는 ATM(Asynchronous Transfer Mode) 교환기 시스템은 팬을 이용한 강제대류냉각 방식의 채택과 시스템이 설치되는 장소에 따른 여러 환경조건에 의한 진동 문제가 발생될 수 있다. 시스템의 진동으로 인한 피해중 커넥터 접촉부에서 전기적 특성의 변화는 고속으로 전송되는 신호의 왜곡을 유발시킬 수 있어 시스템 개발시 이에 대한 충분한 연구 및 시험이 요구되고 있다. 진동환경에서 커넥터 접촉부는 접촉면의 상대운동으로 인한 접촉저항의 증가와 순간적인 신호전달 중단을 가져오게 되며, 특히 PCB/Connector Assembly에서 커넥터 접촉부는 PCB(Printed Circuit Board)의 장착 조건 및 동적 거동에 따라 전기적 특성이 변할 수 있다. 시스템에서 커넥터의 동적 거동을 이해하기 위해서는 PCB를 포함하는 시스템내 여러 요소의 동적 특성 이해와 복잡한 해석과정이 요구되며, 시스템 개발자는 진동 환경에서 이것의 시험 결과에 따라 커넥터의 사용을 결정해야 할 것이다. 커넥터의 전기적 특성 시험법은 IEC, EIA드 여러 국제 규격에 제시되어 있으며, 본 연구의 대상이 된 ATM교환기 시스템에서 PCB/Connector Assembly의 진동환경에서 접촉저항 측정과 관련된 접촉저항 임계치 및 측정법은 IEEE 규격 및 Bellcore 규격에 규정되어 있다. Bellcore에는 주어진 진동시험주기 전후에 IEC 규격의 LLCR(Low Level Contact Resistance) 측정회로를 이용한 측정법이 규정되어 있고, 냉각팬 및 주위 환경진동이 가해지는 동안의 영향에 대한 시험법은 규정되어 있지 않다. 본 연구에서는 한국통신의 전자장비 운용환경시험 조건의 진동에서 ATM 교환기 시스템에 사용되는 PCB/Connector Assembly 커넥터 접촉부의 접촉저항 변화와 PCB 진동에 의한 영향을 시험하였다.proach)등이 제시되었고 평면파 영역에 한하여 해서되어져 왔다. 본 논문에서는 분할 접근 방법(Segmentation Approach)을 이용하여 다공 요소로 이루어진 소음기를 해석하는데 적용하였다.로 성능 및 안정도에 영향을 미치므로 주의 깊게 선정해야 한다. 방법의 실질적인 적용에는 어려움이 있다. 본 연구에서는 기존의 방법들의 단점을 극복할 수 있는 새로운 회귀적 모우드 변수 규명 방법을 개발하였다. 이는 Fassois와 Lee가 ARMAX모델의 계수를 효율적으로 추정하기 위하여 개발한 뱉치방법인 Suboptimum Maximum Likelihood 방법[5]를 기초로 하여 개발하였다. 개발된 방법의 장점은 응답 신호에 유색잡음이 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field and the maximum relaxivity v

• Journal of the Korean Geographical Society
• /
• v.43 no.4
• /
• pp.544-560
• /
• 2008

This study seeks to clarify the background and factors for the expansion of bus networks that connect Incheon International Airport with its hinterlands. For this research objective, this paper analyzes the relationships among the change of bus routes, competitive transportation modes, passenger fares, and the shortest time distance. Previously, the hinterlands of route bus networks that connect Gimpo International Airport were Seoul metropolitan area, Chungcheong region, Jeonju and Iksan in Jeollabuk-do(province). However, the opening of Incheon International Airport resulted in the expansion of the hinterlands of bus networks to Gangwon-do, Gwangju, and major cities in Youngnam region. Simultaneously, route bus networks also expanded in Seoul metropolitan area. Each bus route connecting Incheon International Airport with its hinterlands was opened by a single bus company or various bus companies. In many cases, due to the uncertainty of revenues or bus company's regional ties, a bus route was opened by various bus companies. In this paper, the analysis of the number of one-way route bus service and density of flight passengers shows that the frequency of the route bus service for Seoul except Gangseo-gu(ward) and for Seoul's satellite cities(Suwon, Seongnam, Anyang, Gunpo, Guri, and Osan) should be decreased. The analysis also shows that the frequency of the route bus services for the other cities, counties(Guns), and wards(gus) should be increased. In Seoul metropolitan area, although route bus fares are more expensive than subway fares, passengers use route bus more frequency than subway because time distance of route bus is shorter than that of subway and subway transfer is inconvenient. In general, outside Seoul metropolitan area, air flight is preferred in the regions that have airports. In contrast, the route bus is preferred in Daegu and other regions that do not have airports.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.204-214
• /
• 2013

Recently various research have been conducted relating to the implementation of signal processing or communication system by software using the massively parallel processing capability of the GPU. In this work, we focus on reducing software simulation time of 2K/8K FFT in DVB-T by using GPU. we estimate the processing time of the DVB-T system, which is one of the standards for DTV transmission, by CPU. Then we implement the FFT processing by the software using the NVIDIA's massively parallel GPU processor. In this paper we apply stream process method to reduce the overhead for data transfer between CPU and GPU, coalescing method to reduce the global memory access time and data structure design method to maximize the shared memory usage. The results show that our proposed method is approximately 20~30 times as fast as the CPU based FFT processor, and approximately 1.8 times as fast as the CUFFT library (version 2.1) which is provided by the NVIDIA when applied to the DVB-T 2K/8K mode FFT.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.35-43
• /
• 1995

For several years lots of attempts have been made to establish the liquid membrane-based techniques for separations of gas mixtures especially containing carbon dioxide. A more effective system to separate $CO_{2}$ from flue gases, a circulatory hollow-fiber membrane absorber(HFMA) consisting of absorption and desorption modules with vacuum mode, has been considered in this study. Gas-liquid mass transfer has been modeled on a membrane module with non-wetted hollow-fibers in the laminar flow regime. The influence of an absorbent flow rate on the separation performance of the circulatory HFMA can be predicted quantitatively by obtaining the $CO_{2}$ concentration profile in a tube side. The system of $CO_{2}/N_{2}$ binary gas mixture has been studied using pure water as an(inert) absorbent. As the absorbent flow rate is increased, the permeation flux(i.e., defined as permeation rate/membrane contact area) also increases. The enhanced selectivity compared to the previous results, on the other hand, shows the decreasing behavior. It has been found obviously that the permeation flux depends on the variations of pressure in gas phase of desorption module. From an accurate comparison with the results of conventional flat sheet membrane module, the advantageous permeability of this circulatory HFMA can be clearly ascertained as expected. Our efforts to the theoretical model will provide the basic analysis on the circulatory HFMA technique for a better design and process.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.408-417
• /
• 2011

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1719-1729
• /
• 1994

In this paper, an adaptive CAC(Connection Admission Control) method is proposed. The adaptive CAC uses traffic estimates derived from both traffic parameter specified by user and cell flow measurements. Traffic estimation using user-specified parameters is performed at every moment of connection request or connection release by recursive formula which makes real-time calculation possible. Traffic estimation using cell flow measurement is carried out when the number of connected calls does not change during a measurement reflection period-renewal period. The most import ant thing for the traffic estimation using cell flow measurement is the determination of the length of a renewal period to trace a real traffic flow with an allowable time lag and the measurement reflection ratio(MRR) both to reduce the portion of overestimation and to avoid underestimation of real traffic flow. To solve these problems, the adaptive CAC updates renewal period and MRR adaptively according to the number of connections and the elapsed time after last connection or release respectively. Performance analysis for the proposed method is evaluated in several aspects for the cases of both homogeneous and heterogeneous bursty traffic. Numerical examples show the adaptive CAC method has the better performance compared with conventional CAC method based on burst model from the both utilization and QOS point of view.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.563-569
• /
• 2012

The superheater and reheater tubes of a heavy-load fossil power plant boiler can be damaged by overheating, and therefore, the degree of overheating is assessed by measuring the oxide scale thickness inside the tube during outages. The tube temperature prediction from the oxide scale thickness measurement is necessarily accompanied by destructive tube sampling, and the result of tube temperature prediction cannot be expected to be accurate unless the selection of the overheated point is precise and the initial-operation tube temperature has been obtained. In contrast, if the tube temperature is to be predicted analytically, considerable effort (to carry out the analysis of combustion, radiation, convection heat transfer, and turbulence fluid dynamics of the gas outside the tube) is required. In addition, in the case of analytical tube temperature prediction, load changes, variations in the fuel composition, and operation mode changes are hardly considered, thus impeding the continuous monitoring of the tube temperature. This paper proposes a method for the short-term prediction of tube temperature; the method involves the use of boiler operation information and flow-network-analysis-based tube heat flux. This method can help in high-temperaturedamage monitoring when it is integrated with a practical tube-damage-assessment method such as the Larson-Miller Parameter.

• Journal of Wetlands Research
• /
• v.16 no.4
• /
• pp.477-486
• /
• 2014

Integrated sand control including sediment discharge from hinterland rivers is necessary to maintain coastal sand resources over a long term. In this regard, the following subjects should be considered; efficient ways to transfer discharged sand from a river to the neighboring coast, measures to improve storage efficiency of the discharged sand at the river delta and/or river terrace, measures to prevent the sand resources from being discharged into the deep sea during flooding. From the 1997 to January 2004, the jetty of 156 m length was constructed the Heoya-river mouth to protect the blockade of river mouth. Several tests were carried out to investigate the characteristics of sediment transport and morphological change due to the construction of the jetty at the Heoya-river mouth. Firstly, The sand discharge from Heoya river is quantified by one-dimensional numerical analysis assuming the mixed sand of three different particle diameters. Also the numerical mode system, which predicts the sea bed changes obtained from the Bailard's energy model(1981), was combined with the wave, wave-induced currents and sediment transport models. Then, to understand the changes to the blockade of the river mouth, several aerial photographs were compared, which showed that the changes were significant.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.593-598
• /
• 2013

In this study, we have evaluated the water absorption phenomenon of photoresist dry film, which is commonly used to build circuits on PCB (Printed Circuit Board) by photolithography, by using ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared). We have firstly observed significant change in fracture mode of dry film with respect to temperature and humidity, which we assumed the material transition from ductile to brittle. Secondly, we have established the process of absorption test for determining the diffusion coefficients of water into the dry film both with gravimeter and ATR-FTIR. We have successfully calculated the diffusion coefficients for each environmental conditions from the results which we achieved by gravimeter and ATR-FTIR. Compared to the gravimeter which is a conventional method for absorption test, the ATR-FTIR method in this study has been found to be very easy to use and have the same accuracy as gravimeter. Moreover, we are expecting to use the ATR-FTIR as an appropriate method to study the absorption phenomena related to any kinds of solvent and polymer system.