• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.53-58
• /
• 1999

Eddy current in MRI systems degrades gradient field linearity and distorts gradient waveform. When the waveform distortion is spatially variant, it is very difficult to perform special imaging techniques such as the echo planar imaging technique or the fast spin echo imaging technique. In this study, we have developed a new technique to estimate the distorted gradient waveforms at any points inside the imaging region using the finite element method. After obtaining the eddy-current-effect transfer function, which represents magnitude and phase characteristics of the gradient field at a particular point, we have used the transfer function to estimate the actual gradient waveforms at the point. To verify the proposed technique, we have compared the estimated gradient waveforms with the measured ones.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.99-107
• /
• 2018

In this study, the injector transfer function (ITF) of a gas-gas coaxial jet-swirl injector is measured by perturbing jet or swirl flow using a speaker as jet flow increases. As a result of measuring the ITF varying feed system length, a peak occurs at a resonance frequency of space where the perturbed flow passes. With jet excitation, the ITF magnitude decreases, but increases thereafter as increasing the jet flow. Therefore the larger the velocity difference between jet and swirl flow, the larger the ITF. With swirl excitation, ITF decreases as increasing the jet flow because of the energy decrease with respect to the constant downstream flow.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.373-379
• /
• 2022

In this paper, since the APD(Avalanche Photo Diode) for LTV(Light to Voltage) conversion uses a high voltage in the operating range unlike other PD(Photo Diode)s, the quenching resistor must be connected in series to prevent overcurrent when using the TIA(Transimpedance Amplifier). In such a case, quenching resistance may affect the transfer function of the TIA circuit, resulting in serious stability. Therefore, in this paper, by analyzing the effect of APD quenching resistance on the voltage and current loop transfer function of TIA, we propose a loop analysis and a method for determining the quenching resistance value to improve stability. TIA circuit with quenching resistance was designed by the proposed method and the stability of operation was verified through simulation and chip fabrication.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.506-512
• /
• 2006

시각적인 정보전달이 어려운 상황에서의 대상인식, 혹은 시각장애인의 대상인식에 있어서 소리는 어느 정도의 역할을 할 수 있을까? 이 연구는 소리를 통해 대상의 형태정보를 전달하기 위해 진행되었다. 하나의 음(musical tone)을 음높이와 음색, 지속시간을 조정한 후, 머리전달함수(Head-Related Transfer Function: HRTF)를 이용하여 수평선, 수직선, 대각선, 곡선의 형태로 운동하는 3-D 사운드 형태소로 만들었다. 그리고 이들의 연속적인 조합을 통해 단순한 도형에서부터 복잡한 도형, 이들 2차원상의 도형을 단면으로 하는 3차원상의 도형들까지 그려내는 소리자극을 구성하였다. 성인 대학생을 대상으로 한 실험에서, 이렇게 만들어진 청각이미지(auditory image)를 듣고 표상된 형태를 여러 개의 시각적인 이미지들(visual images) 중에서 선택하는 과제를 실시하였는데, 실험 결과는 평균 78%의 정확율을 보였다. 이는 소리를 이용한 형태정보 전달의 가능성이 있음을 시사하는 것이며, 이러한 시도는 청각 인터페이스의 응용범위를 확장하는데 도움이 될 것이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.12-22
• /
• 2007

This paper presents to predict the powertrain structure-borne noise which is primary resource of interior noise. As the first step, it is built up a hybrid powertrain model which is based on the real powertrain which is verified with static and dynamic properties. The methods for verifying are modal analysis and running vibration testing which are experimentally implemented. Based on the Hybrid powertrain component model, an initial predictive assembly model is simulated. As the second step, the characteristic transfer functions are measured that are dynamic stiffness of rubber mounts and vibro-acoustic transfer function based on the acoustic reciprocity. Several techniques utilizing special experimental devices have been proposed for this research. Finally, the structure-borne noise by powertrain will be predict and verify with dynamic simulation and experiment.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.806-810
• /
• 2000

This paper presents a practical method for reduction of interior noise and improvement of sound quality in compartment of passenger car. The tested vehicle has a booming noise problem at rear passenger seats. In order to identify the transfer path of interior noise, the running modal analysis, the vibro-acoustic frequency transfer response and the noise path analysis are systematically employed. Using these various methods, it has been founded that the rear part of the roof of the test car was a noise source for the booming noise. Through the modification of the roof, the booming noise has been reduced and sound quality inside car also has been improved.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.3
• /
• pp.36-41
• /
• 1974

Two realigation procedures of any open-circuit transfer functions are presented through the use of genera1ized immitance converters composed of two operational amplifiers and passive elements. The fast precedure is to select the admittance conversion, h(s), to be k/s , and the second one to be k/s. The merit of the second procedure is the elimination of capacitors in passive networks, however, requires more CGIC's than the first. The second-order transfer function is realiged in the two methods under discussion to find that the sensitivity of Q factor and the undamped oscillation frequency to the variation of circuit elements. The first procedure proved to be favorable from the view point of sensitivities.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.518-525
• /
• 2012

The modulation transfer function is generally used as a method to estimate the characteristics of this kind of optical system because it cannot reappear or implement image of the object perfect. By the way, it is difficult to assess the optical system with existing MTF method since the reaction between diffraction and aberration of aperture is very complicate if the aberration is very small. The MTF has to be calculated considering the numerical aperture, defocusing, OPD and phase difference. We validate its feasibility using bessel function as an estimating method, and then realize it through illustration in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.103-107
• /
• 2009

Because individual HRTFs (Head-Related Transfer Functions) vary from a person to a person, a HRTF database has been measured by researchers to investigate the inter-subject variation, and to generate high fidelity virtual sound image. Individual HRTFs not only vary between subjects but also vary due to wearing clothes and glasses in daily life. However, influence of different dressing condition on the measured HRTF was not sufficiently investigated. To quantify the effect of wearing clothes and glasses, dummy's HRTF is measured in an anechoic chamber with various dressing condition, and is evaluated in the sense of spectral distortion. HRTFs are measured both in the median plane and in the horizontal plane. In the median plane, under 6kHz, effect of different wearing clothes and glasses is negligible. Over 6kHz, however, effect of clothing distorts HRTF about 6dB in the sense of spectral distortion. Moreover, at high frequencies, effect of glasses is no longer negligible. In the horizontal plane, at some azimuths, even additional light cloth over the dummy can change the spectrum of HRTF (6dB spectral distortion) especially when sound source is at contralateral positions. Therefore, HRTF measurement with different wearing conditions can broaden the capability of HRTF customization whose technique utilizes a HRTF database.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.920-927
• /
• 2008

This study deals with modeling of Head-Related Transfer Functions (HRTFs) using Principal Components Analysis (PCA) in the time and frequency domains. Four PCA models based on Head-Related Impulse Responses (HRIRs), complex-valued HRTFs, augmented HRTFs, and log-magnitudes of HRTFs are investigated. The objective of this study is to compare modeling performances of the PCA models in the least-squares sense and to show the theoretical relationship between the PCA models. In terms of the number of principal components needed for modeling, the PCA model based on HRIR or augmented HRTFs showed more efficient modeling performance than the PCA model based on complex-valued HRTFs. The PCA model based on HRIRs in the time domain and that based on augmented HRTFs in the frequency domain are shown to be theoretically equivalent. Modeling performance of the PCA model based on log-magnitudes of HRTFs cannot be compared with that of other PCA models because the PCA model deals with log-scaled magnitude components only, whereas the other PCA models consider both magnitude and phase components in linear scale.