• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.1005-1008
• /
• 2001

The lanthanide complexes have been anticipated to exhibit high efficiency along with a narrow emission spectrum. Photoluminescence for the lanthanide complex is characterized by a high efficiency since both singlet and triplet excitons are involve d in the luminescence process. However, the maximum external electroluminescence quantum efficiencies have exhibited values around 1% due to triplet-triplet annihilation at high current. Here, we proposed a new energy transfer mechanism to overcome triplet-triplet annihilation by the Eu complex doped into phosphorescent materials with triplet levels that were higher than singlet levels of the Eu complex. In order to show the feasibility of the proposed energy transfer mechanism and to obtain the optimal ligands and host material, we have calculated the effect depending on ligands as a factor that controls emission intensity in lanthanide complexes. The calculation shows that triplet state as well as singlet state of anion ligand affects on absorption efficiency indirectly.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.306-309
• /
• 2019

Wireless charging is a technology of transmitting power through an air gap to an electrical load for the purpose of energy dissemination. Compared to traditional charging with code, wireless power charging has many benefits of avoiding the hassle from connecting cables, rendering the design and fabrication of much smaller devices without the attachment of batteries, providing flexibility for devices, and enhancing energy efficiency, etc. A transmitting coil and a receiving coil for inductive coupling or magnetic resonant coupling methods are available for the near field techniques, but are not for the far field one. In this paper, the wireless power transfer (WPT) circuit by using magnetic resonant coupling method with a resonant frequency of 13.45 Mhz for the low power system is implemented to measure the power transmission efficiency in terms of mutual distance and omnidirectional angles of receiver.

• 한국환경과학회지
• /
• 제11권6호
• /
• pp.605-610
• /
• 2002

The absorption of benzene in nonpolar solution was studied in a laboratory-scale of bubble column varying of gas flow rates and gas-to-liquid ratios. A bubble column had a 0.8∼l$\times$10$\^$-3/ m$^3$ total volume (height 1500 mm, diameter 50 mm). Solution analysis was performed by GC-FID and GC-MSD. The objectives of this research were to select the best absorption fluid and to evaluate the mass transfer characteristics under specific conditions of each absorption. The results of this research were follow as: First, the heat transfer fluid is more efficient than the other nonpolar solution in removing VOC. Second, The benzene removal efficiency improved according to an increasing rate of gas flow. Also, volumetric mass transfer rate of column can be enhanced by increasing gas flow rate. Finally, the relation of gas flow rates, liquid amount, and volumetric mass transfer coefficient was obtained as follows. K$\_$y/a: 0.5906(V$\_$g//L)$\^$0.7611/ The following correlation of mass transfer coefficient and efficiency was proposed. v= 0.06078 K$\_$y/a$\^$0.2444/.

• 융복합기술연구소 논문집
• /
• 제7권1호
• /
• pp.1-6
• /
• 2017

The Heat exchanger for deep geothermal system is very important to enhance the efficiency of the system. The co-axial heat exchanger is used due to the limitation of digging space. The heat transfer on the external surface of outer pipe should be high to receive a large amount of heat from the ground. However, the inner pipe should be insulated to reduce the heat loss and increase the temperature of discharge water. This study made experiment apparatus to describe the co-axial heat exchanger and measure the heat transfer coefficients on the internal and external surface. And the pin-fin was designed and fixed on the internal surface to increase the efficiency of heat exchanger. Finally, we calculated the temperature of discharge water using the heat transfer circuit of co-axial heat exchanger and heat transfer coefficient which from experimental results. The water temperature was reached the ground temperature at -500 m and following the ground temperature. When the water return to the ground surface, the water temperature was decreased due to heat loss. As the pin-fin case, the heat transfer coefficient on the internal surface was decreased by 30% and it mean that the pin-fin help to insulate the inner pipe. However, the discharge water temperature did not change although pin-fin fixed on the inner pipe.

• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.233-240
• /
• 2016

The research aims to study the different flexible rubber tube diffusers used in urban wastewater treatment processes and aquaculture systems. The experiment was conducted in small-scale aeration tank with different physical properties of the tubes that were used as aerators. The volumetric mass transfer coefficient ($k_La$), oxygen transfer efficiency (OTE) and aeration efficiency (AE) were measured and determined to compare the diffusers. Moreover, the bubble hydrodynamic parameters were analyzed in terms of bubble diameter ($d_B$) and rising velocity ($U_B$) by a high speed camera (2,000 frames/s). Then the interfacial area (a) and liquid-side mass transfer coefficient ($k_L$) can be calculated. The physical properties (tube wall thickness, tensile strength, orifice size, hardness and elongation) have been proven to be the key factor that controls the performance (kLa and OTE). The effects of hardness and elongation on bubble formation, orifice size and a-area were clearly proved. It is not necessary to generate too much fine bubbles to increase the a-area: this relates to high power consumption and the decrease of the kL. Finally, the wall thickness, elongation and hardness associated of the flexible tube diffuser (tube No. 12) were concluded, to be the suitable properties for practically producing, in this research.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.816-819
• /
• 2005

자바 프로그램의 실행 환경인 자바가상기계에서는 거의 모든 바이트코드들이 메모리 상에서의 자료 이동을 필요로 한다. 자료 이동은 에너지 소비를 일으키므로 이것의 최소화는 JVM의 에너지 효율성 향상에 매우 중요하다. 특히 자바 반복문은 반복 회수에 비례하는 양만큼의 자료 이동을 요구하므로 JVM의 에너지 효율을 높이기 위해서는 무엇보다도 자바 반복문의 에너지 효율을 높이는 것이 중요하다. 본 논문에서는 자바 반복문을 바이트코드 수준에서 분석하여 에너지 효율성을 높일 수 있는 여러 방법들을 제안하였다.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.684-688
• /
• 2016

The magnetic resonance method requires high quality factor(Q-factor) of resonators. Superconductor coils were used in this study to increase the Q-factor of wireless power transfer(WPT) systems in the magnetic resonance method. The results showed better transfer efficiency compared to copper coils. However, as superconducting coils should be cooled below critical temperatures, they require cooling containers. In this viewpoint, shielding materials for the cooling containers were applied for the analysis of the WPT characteristics. The shielding materials were applied at both ends of the transmitter and receiver coils. Iron, aluminum, and plastic were used for shielding. The electric field distribution and S-parameters (S11, S21) of superconducting coils were compared and analyzed according to the shield materials. As a result, plastic shielding showed better transfer efficiency, while iron and aluminum had less efficiency. Also, the maximum magnetic field distribution of the coils according to the shielding materials was analyzed. It was found that plastic shielding had 5 times bigger power transfer rate than iron or aluminum. It is suggested that the reliability of superconducting WPT systems can be secured if plastic is used for the cooling containers of superconducting resonance coils.

• 전자공학회논문지CI
• /
• 제41권4호
• /
• pp.1-8
• /
• 2004

PCI 2.2 버스 마스터가 메모리 읽기 명령으로 타겟 장치에 데이터 전송을 요구하면 타겟 장치는 내부적으로 데이터 준비하는데 시간이 필요하므로 데이터 전송 없이 장시간 PCI 버스를 점유하는 상황이 발생할 수 있다. 이는 PCI 버스 사용 효율 및 데이터 전송 효율을 떨어뜨리게 되며 이를 해결하기 위해 PCI 2.2에서는 지연 트랜잭션 메커니즘을 이용한다. 그러나 이 방법은 타겟 장치가 프리페치해야 할 정확한 데이터의 양을 알 수 없기 때문에 데이터 전송 효율이 떨어진다. 본 논문에서는 메모리 읽기 명령을 수행하고자 하는 버스 마스터가 메모리 쓰기 명령어를 이용하여 타겟 장치에게 읽어올 데이터의 양을 미리 알려주는 프리페치 요구를 이용해 보다 효율적으로 데이터를 전송하는 방법을 제안한다. 모의실험 결과 제안된 방법이 지연 트랜잭션에 비해 데이터 전송 효율이 평균 10 % 향상되었다.

• 한국수정란이식학회지
• /
• 제23권2호
• /
• pp.67-76
• /
• 2008

Since the birth of Dolly using fully differentiated somatic cells as a nuclear donor, viable clones were generated successfully in many mammalian species. These achievements in animal cloning demonstrate developmental potential of terminally differentiated somatic cells. At the same time, the somatic cell nuclear transfer (SCNT) technique provides the opportunities to study basic and applied biosciences. However, the efficiency generating viable offsprings by SCNT remains extremely low. There are several explanations why cloned embryos cannot fully develop into viable animals and what factors affect developmental potency of reconstructed embryos by the SCNT technique. The most critical and persuasive explanation for inefficiency in SCNT cloning is incomplete genomic reprogramming, such as DNA methylation and histone modification. Numerous studies on genomic reprogramming demonstrated that incorrect DNA methylation and aberrant epigenetic reprogramming are considerably correlated with abnormal development of SCNT cloned embryos even though its mechanism is not fully understood. The SCNT technique is useful in cloning farm animals because pluripotent stem cells are not established in farm animal species. Therapeutic cloning combined with genetic manipulation will help to control various human diseases. Also, the SCNT technique provides a chance to overcome excessive demand for the organs by production of transgenic animals as xenotransplantation resources. Here, we describe the factors affecting the efficiency of generating cloned farm animals by the SCNT technique and discuss future directions of animal cloning by SCNT to improve the cloning efficiency.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1556-1565
• /
• 2017

This paper depicts the design, implementation and analysis of efficient resonant based wireless power transfer (WPT) technique using three magnetic coupled coils. This work is suitable for mid ranged device due to small form factor while minimizing the loading effect. A multi turned loop size resonator is exploited for both the transmitter and receiver for longer distance. In this paper, class-E power amplifier (class-E PA) is introduced with an optimum power tracking mechanism of WPT system to enhance the power capability at mid-range with a flat gain. A robust method of finding optimum distance is derived with an experimental analysis of the designed system. In this method, the load sensitive issue of WPT is resolved by tuning coupling coefficient at considerable distances. Our designed PA with a drain efficiency of 77.8% for a maximum output of 5W is used with adopted tuning technique that improves the overall WPT system performance by 3 dB at various operating points.