• 제목/요약/키워드: Transfer Standard

검색결과 1,034건 처리시간 0.029초

IEEE 802.11a 무선랜용 중간전력 SPDT 초고주차단일집적회로 스위치 제작 및 특성 (A Medium Power Single-Pole-Double-Throw MMIC Switch for IEEE 802.11a WLAN Applications)

  • 문재경;김해천;박종욱
    • 한국통신학회논문지
    • /
    • 제30권10A호
    • /
    • pp.965-970
    • /
    • 2005
  • 본 연구에서는 IEEE 802.11a 표준 무선랜 단말기에 활용 가능한 SPDT Tx/Rx 스위치 MMICs를 설계 및 제작하였다. 이를 위하여 먼저 핵심이 되는 pHEMT 스위치 소자의 에피구조를 설계하였으며, 한국전자통신연구원(ETRI의 $0.5{\mu}m$ pHEMT 스위치 공정을 이용하였다. 제작된 SPDT형 Tx/Rx 스위치 MMIC는 주파수 5.8 GHz, 동작전압 0/-3V에서 삽입손실 0.68 dB, 격리도 35.64 dB, 그리고 반사손실 13.4dB의 특성을 보였으며, 전력전송능력인 P1dB는 약 25dBm, 그리고 선헝성의 척도인 IIP3는 42 dBm 이상으로 평가되었다. 제작된 스위치 회로의 성능은 상용제품과 비교 분석한 결과 반사손실은 약간 부족하였으나 삽입손실은 비슷한 수준이며, 특히 격리도는 동작전압 ${\pm}$ 3V/0Vv, 주파수 5.8GHz에서 약 8 dB 이상 우수하였다. 이와 같은 여러 가지의 스위치 회로의 성능은 본연구에서 개발된 pHEMT SPDT 스위치는 IEEE802.11a 표준 5GHz 대역 무선랜에 충분히 할용할수 있을 것으로 생각된다.

국제환경법상 우리나라의 법적 지위 - 선진국과 개도국의 구분을 중심으로 - (Legal Status of Korea in International Environmental Law - Mainly focused on the Classification of Developed and Developing Countries -)

  • 서원상
    • 환경정책연구
    • /
    • 제6권4호
    • /
    • pp.1-28
    • /
    • 2007
  • 한 국가의 환경오염이 정치적 경계선에 불과한 국경에 한정되지 않고 인접국 또는 지구의 환경에 직 간접적인 영향을 미치기 때문에, 역으로 지구환경보호에 관한 국제적 논의결과는 곧바로 국내 환경법과 환경정책에 영향을 미치게 된다. 국제환경법은 '차별적 공동책임'이라는 원칙하에 선진국과 개발도상국 간의 차별적인 의무체계를 형성하고 있다. 차별적 공동책임은 모든 국가에게 공동의 환경보호책임을 확인하면서도 지구환경문제에 대한 선진국과 개발도상국 간의 역사적 책임의 차이와 환경문제를 다룰 수 있는 경제적 기술적 능력의 차이를 인정하여 국제의무를 차별화한다는 것이다. 그 예로써 선진국의 개발도상국에 대한 환경기술이전과 재정 지원 등이 논의되어 왔다. 문제는 우리나라의 지위이다. 선진국과 개발도상국의 지위에 따른 국제환경의무의 차이만큼이나 우리나라의 국제적 환경정책 또한 달라질 것이기 때문이다. 그 어느 국제법도 선진국과 개발도상국의 구분 기준을 명확히 확립하지 못하였다. WTO는 개발도상국 지위결정을 자기선택에 맡기고 있으며, 국제환경법에서는 협상능력에 따라 그 지위가 좌우되곤 한다. 결국 일반국제법 차원에서 우리나라의 지위가 고정될 수 없으며 정부는 선진국 또는 개발도상국의 지위를 전략적 차원에서 선택할 수 있다. 우리나라가 스스로 개발도상국임을 주장하여 국제의무의 부담을 줄이는 것도 좋은 선택일 수 있겠지만, 각종 경제지표 및 환경오염지표에서 10위권을 유지하고 있는 우리나라의 규모에 비추어볼 때 우리나라의 현실은 선진국에 가깝다고 보여진다. 친환경기술 및 상품의 개발이라는 적극적 정책이 개도국 주장이라는 방어적 정책보다 우선이다.

  • PDF

DVB-T2기반으로 지상파 UHDTV방송과 직접수신환경 구축 연구 (A Study on Terrestrial UHDTV Broadcasting and Construction of Direct Reception Environment by DVB-T2)

  • 박성규;조영준;김동우;박구만
    • 방송공학회논문지
    • /
    • 제18권4호
    • /
    • pp.572-588
    • /
    • 2013
  • 본 논문에서는 지상파방송 무선전송 환경에서 4K-UHDTV 혹은 8K-UHDTV 및 UHD-3DTV 등 차세대방송 구현 및 효과적인 수신환경 구축 가능성을 현재 상용화된 전송방식 중 DVB-T2 기술을 중심으로 제안하였다. 특히, 2012년 완료된 지상파방송 디지털전환에 이어 또다시 UHDTV방송을 위한 차세대방송 투자와 전환의 성공조건으로 초고화질 영상 전송 외에도 TV뿐만 아니라 개인형 멀티미디어 단말기에서도 수신이 가능한 직접수신과 실내수신 및 언제 어디서나 자유로운 수신환경 제공도 매우 중요함을 강조하고 있다. 본 논문에서는 UHDTV방송 구현 시 효율적인 주파수 활용과 효과적인 수신환경 구축방안을 찾는데 목적을 두고 있다. 아울러 DVB-T2 전송방식이 가지고 있는 SFN 기능 및 강력한 수신오류정정 능력을 이용하여 VHF대역과 UHF대역 등 2개의 서로 다른 주파수에 의한 SFN 송출망 구성 방법을 제시하고, SFN 소출력중계기 및 가정용 Gap Filler를 활용한 자유로운 무선수신환경 구축 방안을 제안하고 있다. 그 외 10MHz 폭 채널을 이용한 UHDTV방송 효과와 주파수 소요량을 제시한다.

지상기준점 추가에 의한 IKONOS RPC 갱신 (Modification of IKONOS RPC Using Additional GCP)

  • 방기인;정수;김경옥;조우석
    • 대한공간정보학회지
    • /
    • 제10권4호
    • /
    • pp.41-50
    • /
    • 2002
  • RFM은 OGC (Open GIS Consortium)에서 권고하는 지구관측영상에 대한 표준기하모델 중 하나이다. 또한 RFM은 1m의 공간해상도를 제공하는 상업목적의 위성 IKONOS의 최종 사용자를 위한 센서 모델로서 RPC를 RFM을 위한 매개변수로서 영상과 함께 제공하고 있다. 그러나 영상의 최종사용자가 더욱 정확한 공간정보의 획득을 위해 추가적인 노력을 시도하는 경우, IKONOS는 물리적 센서모델을 위한 보조적인 정보의 제공이 미흡하기 때문에 추상적인 센서모델이나 수학적인 센서모델을 도입하게 된다. Pushbroom DLT와 같은 추상적인 센서모델을 적용하기 위해서는 영상 전체에 고르게 분포하는 다수의 GCP를 관측해야 하며, RFM과 같은 수학적인 센서모델을 적용하기 위해서도 더욱 많은 수의 GCP가 필요하게 된다. 따라서 가장 효율적인 방법은 가장 적은 수의 기준점을 이용하여 영상과 함께 제공되는 RPC를 개선하는 방법이다. 본 논문에서는 소수의 추가적인 UP를 이용하여 IKONOS의 RPC를 개량하는 2가지 방법을 제안한다. 첫 번째는 소수의 지상기준점과 normalized cubic 내에 설치된 가상의 기준점을 이용하여 RPC를 갱신하는 방법이고, 두 번째는 매개변수에 대한 관측을 도입하여 $1^{\sim}5$개의 소수 지상기준점 만으로 RPC를 갱신하는 방법이다. 본 연구에서 갱신된 RPC는 검사점을 통해 검증한 결과 갱신 전보다 RMSE가 50% 정도 개선된 것을 확인할 수 있었다.

  • PDF

사물인터넷 헬스케어 서비스를 위한 oneM2M기반 ISO/IEEE 11073 DIM 전송 구조 설계 및 구현 (Design and Implementation of ISO/IEEE 11073 DIM Transmission Structure Based on oneM2M for IoT Healthcare Service)

  • 김현수;천승만;정윤석;박종태
    • 전자공학회논문지
    • /
    • 제53권4호
    • /
    • pp.3-11
    • /
    • 2016
  • 사물 인터넷 (Internet of Things : IoT) 환경에서 IoT 디바이스들은 전원이나 메모리 등의 물리적 구성요소들에 의해 제한되며 대역폭, 무선 채널, 처리율, 페이로드 등의 네트워크 성능 또한 제한적임에도 불구하고 타 IoT 디바이스들과 리소스를 공유한다. 특히 IoT 헬스케어 서비스에 있어서 원격 디바이스 정보 관리 뿐만 아니라 원격 환자 정보관리가 매우 중요하며, 더욱이, 사물인터넷 헬스케어 디바이스와 헬스케어 플랫폼간 상호연동성 지원이 매우 중요하다. 이를 위해서는 헬스케어 디바이스와 헬스케어 플랫폼간 데이터 정보 표현, 데이터 전송 표현, 메시지 규격 등이 사물인터넷 환경에 적합한 국제표준 준수가 매우 필요하다. 하지만, 기존의 국제의료정보 전송표준인 ISO/IEEE 11073 PHD (Personal Healthcare Device) 표준에서는 사물인터넷 환경 (네트워크 프로토콜)을 고려하지 않아 사물인터넷 헬스케어 서비스에 적용하기 어렵다. 이를 위해 본 논문에서는 사물인터넷 표준인 oneM2M과 의료정보 전송표준인 ISO/IEEE 11073 DIM(Domain Information Model)을 적용한 사물인터넷 헬스케어 시스템을 설계 및 구현하였다. 구현을 위해 oneM2M 기반인 OM2M 플랫폼을 활용하였고, 헬스케어 디바이스와 OM2M 플랫폼간 효율적인 전송 구문에 대한 평가를 위해 HTTP와 CoAP간, XML과 JSON간 단일 처리과정의 패킷 사이즈와 전송 패킷 수 등을 성능 분석하였다.

기울어진 비구면 프레넬 렌즈와 C-8 type 전구를 이용한 해상용 랜턴의 배광곡선 시뮬레이션을 통한 성능평가 (Performance evaluation by simulation for the angular luminous intensity distributions of marine lanterns using a tilting aspherical Fresnel lens and a C-8 type light bulb)

  • 조현석;조재흥;박승남;박철웅;김용완;김종태
    • 한국광학회지
    • /
    • 제15권6호
    • /
    • pp.511-518
    • /
    • 2004
  • 대구경이 가능하며 가벼운 프레넬 렌즈로 10 해리 (18.53 km)까지 빛을 비출 수 있는 해상용 랜턴을 설계하고 배광곡선을 시뮬레이션하였다. 렌즈설계 프로그램으로 직경 250 mm와 300 mm인 프레넬 렌즈를 설계하였으며, 이 프레넬 렌즈의 groove 변수들을 최적화하였다. 해상용 랜턴에서 사용하는 전구의 배광곡선을 고려하여 이 프레넬 렌즈의 배광곡선을 조명설계 프로그램으로 계산하였다. 이 결과 전구를 최적의 위치로 정렬하였을 때 이 해상용 랜턴들의 최대광도는 각각 KS 규격인 720 cd를 훨씬 넘는 1000 cd(직경 250 mm의 해상용 랜턴의 경우)와 1300 cd (직경 300 mm의 해상용 랜턴의 경우)로 계산되었다. 그리고 전구의 정렬오차를 정하기 위하여 렌즈의 초점거리에서 벗어난 정도에 따라 배광곡선이 변하는 정도도 알아보았다.

혈관조영술에서 동영상 전송의 유용성 고찰 (Continued image Sending in DICOM of usefulness Cosideration in Angiography)

  • 박용성;이종웅;정희동;김재열;황선광
    • 대한디지털의료영상학회논문지
    • /
    • 제9권2호
    • /
    • pp.39-43
    • /
    • 2007
  • In angiography, the global standard agreements of DICOM is lossless. But it brings on overload and takes too much store space in DICOM sever. Because of all those things we transmit images which is classified in subjective way. But this cause data loss and would be lead doctors to make wrong reading. As a result of that we try to transmit continued image (raw data) to reduce those mistakes. We got angiography images from the equipment(Allura FD20-Philips). And compressed it in two different methods(lossless & lossy fair). and then transmitted them to PACS system. We compared the quality of QC phantom images that are compressed by different compress method and compared spatial resolution of each images after CD copy. Then compared each Image's data volume(lossless & lossy fair). We measured spatial resolution of each image. All of them had indicated 401p/mm. We measured spatial resolution of each image after CD copy. We got also same conclusion (401p/mm). The volume of continued image (raw data) was 127.8MB(360.5 sheets on average) compressed in lossless and 29.5MB(360.5 sheets) compressed in lossy fair. In case of classified image, it was 47.35MB(133.7 sheets) in lossless and 4.5MB(133.7 sheets) in lossy fair. In case of angiography the diagnosis is based on continued image(raw data). But we transmit classified image. Because transmitting continued image causes some problems in PACS system especially transmission and store field. We transmit classified image compressed in lossless But it is subjective and would be different depend on radiologist. therefore it would make doctors do wrong reading when patients transfer another hospital. So we suggest that transmit continued image(raw data) compressed in lossy fair. It reduces about 60% of data volume compared with classified image. And the image quality is same after CD copy.

  • PDF

폴리머코어 게이트 크기 변화가 두께 방향 수축률에 미치는 영향에 대한 연구 (A study on the effects of polymer core gate sizes on thickness shrinkage rate)

  • 최한솔;정의철;박준수;김미애;채보혜;김상윤;김용대;윤경환;이성희
    • Design & Manufacturing
    • /
    • 제14권1호
    • /
    • pp.1-7
    • /
    • 2020
  • In this study, the variation of the shrinkage in the thickness direction of the molded parts according to the gate size of the polymer core fabricated through the 3D printer using the SLS method was studied. The polymer cores are laser sintered and the powder material is nylon base PA2200. The polymer cores have lower heat transfer rate and rigidity than the metal core due to the characteristics of the material. Therefore, the injection molding test conditions are set to minimize the deformation of the core during the injection process. The resin used in the injection molding test is a PP material. The packing condition was set to 80, 90 and 100% of the maximum injection pressure for each gate size. The runner diameter used was ∅3mm, and the gates were fabricated in semicircle shapes with cross sections 1, 2, and 3 ㎟, respectively. Thickness measurement was performed for 10 points at 2.5 mm intervals from the point 2.5 mm away from the gate, and the shrinkage to thickness was measured for each point. The shrinkage rate according to the gate size tends to decrease as the cross-sectional area decreases as the maximum injection pressure increases. The average thickness shrinkage rate was close to 0% when the packing pressure was 90% for the gate area of 1mm2. When the holding pressure was set to 100%, the shrinkage was found to decrease by 3% from the standard dimension due to the over-packing phenomenon. Therefore, the smaller the gate, the more closely the molded dimensions can be molded due to the high pressure generation. It was confirmed that precise packing process control is necessary because over-packing phenomenon may occur.

전기적-미세역학시험법과 음향방출을 이용한 단일 탄소섬유/탄소나노튜브-에폭시 나노복합재료의 자체-감지능 (Self-Sensing of Single Carbon Fiber/Carbon Nanotube-Epoxy Composites Using Electro-Micromechanical Techniques and Acoustic Emission)

  • 박종만;장정훈;왕작가;권동준;박종규;이우일
    • 비파괴검사학회지
    • /
    • 제30권5호
    • /
    • pp.411-422
    • /
    • 2010
  • 탄소나노튜브-에폭시 복합재료의 미세손상에 대한 자체-감지도와 분산도와 관련되는 특성 연구가 접촉각, 전기-미세역학 시험법 및 음향방출을 통하여 수행하였다. 시편들은 미처리와 산처리된 탄소나노튜브가 첨가된 에폭시 복합재료와 순수 에폭시로 제조되었다. 상대적인 분산도는 부피 전기저항도와 그 표준편차로 평가하였다. 응력전달을 나타내는 겉보기 탄성율은 미처리 탄소나노튜브 복합재료보다 산처리된 경우가 크게 나타났다. 단일 탄소섬유/탄소나노튜브-에폭시 복합재료는 부가한 반복 하중에 대해서 접촉저항도의 변화로 잘 감지되었다 섬유 풀-아웃 시험에서 단일 탄소섬유와 탄소나노튜브-에폭시간의 계면접착강도는 순수 에폭시의 경우보다 작았다. 음향방출과 함께 전기저항측정을 통한 미세파손 감지는, 전도성 있는 탄소나노튜브-에폭시 복합재료에서는 단일 탄소섬유 파손에 대한 단계적인 전기저항도의 증대를 보여 주었으나, 순수 에폭시의 경우는 첫번째 탄소섬유의 파단의 경우 바로 저항이 무한대로 증대함을 보여주었다. 첨가한 탄소나노튜브의 미세계면 손상으로 인하여, 음향방출 발생이 나노복합재료가 순수 에폭시에 비하여 훨씬 증대하였다.

지역응급의료센터에서 손상구역 운용이 응급실 과밀화 지표에 미치는 영향 (The Effect of Application of Injury Area to Overcrowding Indices in Local Emergency Department)

  • 강진욱;신상도;서길준;유은영;송경준
    • Journal of Trauma and Injury
    • /
    • 제20권2호
    • /
    • pp.77-82
    • /
    • 2007
  • Purposes: There have been many efforts to improve the service of emergency centers. In spite of these, no evidence is showing any landmark advancement of emergency services, especially in the hospital stage, exists. We need some efficient standard criteria to evaluate emergency service in the hospital stage, and a useful method might utilize the overcrowding index. We want to know the change in the overcrowding index at a regional emergency center after injury area administration. Injury area means an area in which only an assigned duty physician manages patients with injuries such as those from traffic accidents, falls, assualts, collisions, lacerations, amputations, bums, intoxication, asphyxia, drowning, animal bites, sexual assualts, etc. Methods: We started to operate an injury area in our emergency department from late 2004, and from January to June in 2004 and in 2005, we collected patients' data, age, sex, assigned department, and result from hospital order communication system to figure out overcrowding indices and result indices. We found the daily number of patients, the turnover rate, the admission rate, the ICU admission rate, the emergency operation rate, the ED stay duration, and the ED patient volume to be overcrowding indices. Also we found the withdrawal rate, the transfer rate, and mortality to be result indices. We compared these indices between 2004 to 2005 by using a t-test. Results: There was a significant increase in the daily number of visiting patients in 2005, overcrowding indices, such as the turnover rate, the admission rate, the ICU admission rate, and the emergency operation rate, also showed statistically significant increases in 2005 (P<0.001). As for the result indices, there was a noticeable decrease in the number of withdrawals (11.77/day in 2004 to 4.53/day in 2005). Conclusion: Operating an injury area in a mildly overcrowded local emergency center is beneficial. Evaluating the effect of operating an injury area and it's impact on hospital finances by conducting a similar study analyziing patients for a longer duration would be valuable.