• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.3-13
• /
• 2009

When promoting BTL(Build Transfer Lease; below BTL) project, negotiation is a stage of examining observation and reflection of RFP(Request for Proposal below RFP) in terms with facilities, operating and financing. It keeps an important position in whole process. However, there is no consistent guideline or model which helps evaluating the result of negotiation. It is difficult to apprise the quantitative outcome after executing negotiation. Thus, this study presented the Value Engineering -based process and model of estimating the outcome of negotiation for the purpose of estimating and verifying the result of negotiation objectively, Evaluating factors of negotiation were classified into 6 fields, 38 divisions and 135 items, focused on cultural facilities on BTL project. Weight of every factor was estimated, and quantitative checklist was established. This study presented the model which could measure the outcome of negotiation. This result would be a critical checklist before negotiation on BTL project, an index of feedback during negotiation, and also a standard of estimating the outcome after negotiation.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.43-50
• /
• 2016

In this paper, we propose the protocol of Ethernet that will receive a popular interesting in the automotive intelligent network, it also attempts to implementation and verification through simulation and experiments to propose a fault tolerance algorithm when the data transfer on it. It has proven the usefulness of the system in order to apply toward an existing automotive communication system. In the case of actual real-time data for automotive industry, we generated a randomly-generated data which is the set of payload into a standard format to complete the experiment. Among the implemented existing algorithms performance, we confirmed the effectiveness of all range from a single data to mixed (Hybrid-type) data, to verify the proposed algorithm.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.22-27
• /
• 1999

While the conventional end-to-end anastomotic technique is accepted as 'the golden standard' for microvascular anastomosis, it is time-consuming and tedious. In an effort to offer faster and safer ways of performing microvascular anastomoses, numerous anastomotic techniques have been proposed, but further refinements in microvascular techniques are still necessary. A 'continuous suture with interrupted knot' technique was devised for faster and safer anastomosis. It has been successfully used in microanastomoses of both artery and vein for free tissue transfer. It is a combination of the interrupted suturing technique and the continuous suturing technique. First, a continuous suture is made with the size of loop decreasing in order, and then the sutures are tied individually from the first loop to the last one as in the conventional interrupted suturing technique. It was applied clinically to fourteen patients over the past ten months and found to be a highly efficient technique that satisfied our needs. This 'continuous suture with interrupted knot' technique has several advantages over other techniques : The operative time is reduced comparing conventional interrupted suture technique. By delaying the tie and with the vessel walls kept separated, the risk of through-stitch can be reduced. Tying all the sutures at one time not only speed up the procedures, but also reduced the surgeon's fatigue. In addition, it has no problem of anastomotic stenosis which is a disadvantage of continuous suture technique. This technique proved to be faster and safer, and has patency equal to that of the conventional end-to-end anastomosis. It is of great help to the surgeon in reducing operative time, especially in clinical situations when many anastomoses are required, or lengthy grafting procedures are undertaken.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.702-708
• /
• 2014

Background Lower abdominal soft tissue transfer is the standard procedure for breast reconstruction. However, abdominal wall weakness and herniation commonly occur postoperatively at the donor site. To reduce the morbidities of the donor site, the superficial inferior epigastric artery (SIEA) flap was introduced, but inconsistent anatomy of the SIEA has reduced its utility. In the present study, the anatomy of the superficial inferior epigastric vessels in Korean women was determined with regards to breast reconstructive surgery. Methods The vascular anatomies of the SIEA and superficial inferior epigastric vein (SIEV) were evaluated on 32 breast cancer patients receiving free transverse rectus abdominis musculocutaneous flap reconstruction after mastectomy. The existence, pulsation, location, external diameter, and depth of the SIEA and SIEV were measured at the lower abdominal incision level. Results SIEA and SIEV were present in 48/64 (75.00%) and 63/64 (98.44%) hemi-abdomens, respectively. Pulsation of the SIEA was found in 44/48 (91.67%) cases. The mean locations of SIEA and SIEV were +5.79 (${\pm}12.87$) mm, and -8.14 (${\pm}15.24$) mm from the midpoint between the anterior superior iliac spine and symphysis pubis, respectively. The mean external diameters of SIEA and SIEV were 1.20 (${\pm}0.39$) mm and 1.37 (${\pm}0.33$) mm, and they were found at a mean depth of 9.75 (${\pm}2.67$) mm and 8.33 (${\pm}2.65$) mm, respectively. Conclusions The SIEA was absent in 25% of Korean women and had a relatively small caliber. Therefore, careful preoperative assessment of the lower abdominal vasculature is required to achieve successful breast reconstruction using SIEA flaps.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.2
• /
• pp.61-74
• /
• 2005

Wonsam, a type of korean women's gown in Choseon Dynasty, was used as a small ceremonial costume for queens, crown princesses and princesses and as a grand ceremonial costume for royal concubines and wives of high rank officials. It was also worn as a wedding dress for commoners. In the families of illustrious officials, it was also used as burial accessories or garments for the dead. In this context, Wonsam is a formal dress for the people's most important four ceremonies of coming-of-age, marriage, funeral, and ancestor worship. It is worth emphasizing the costume since it was widely and importantly used by all ranks of women, from royal families to commoners. Through the Wonsam of An-dong Kim Clan's, we can see what the society was like at the end of Choseon Dynasty. First, a status system that strictly divided costumes for each class, was, in many parts, broken down. Second, the highly wrought patterns and texture of fabrics of the Wonsam reveal that it was granted from Court, or, if woven by the Kim family, it is considered to be produced by the Court's craftsman or through technical transfer, considering that the weaving skills used are as good as those in Courts. Third, regarding the precise needlework that is uncomparable to textiles used by other illustrious officials families, the Wonsam is considered to be granted from Court or, produced through the needlework skills that were handed down from needlewomen in Courts. The Wonsam of An-dong Kim Clan's has noble beauty in it, with outstanding weaving skills, fabrics, needlework and shape. Thus, it is no exaggeration to say that it has those qualities to be the standard costume that inherits the tradition of Korean people.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.193-201
• /
• 2006

The Evaluation system of Excellent Construction Technology has been operated for 15 years from 1990 in Korea. 443 technologies have been certified as Excellent Construction Technology(ECT) and those ECTs are adapted over 20,000 times into the construction projects. As a result of investigation, new technology evaluation system became a stable stage because new technology evaluation system has assigned about 433 and also applied more than 20,000 times in construction sites in 2004. However, it was indicated to a large problem that there aren't still detail criteria of cost assessment for using ECTs. Therefore, we analyzed the status and problems of the cost of using ECTs and suggested some useful ideas which are reviewed by various aspects. Specially we suggested specified criteria for the cost assessment of using ECTs. It is based on the scheduled construction cost and determined the rate $({\bullet}{\cdot})$ of using ECTs. To adapt ECTs into construction projects nationwide not only it is very important to certify better new technologies but also it is required to make the criteria of cost assessment for using ECTs.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.sup3
• /
• pp.19-31
• /
• 2016

The objective of this paper is to investigate the effect of thickness and moisture on temperature distributions of reinforced concrete walls under fire conditions. Toward this goal, the first three wall specimens having different thicknesses are heated for 2 h according to ISO standard heating curve and the temperature distribution through the wall thickness is measured. Since the thermal behavior of the tested walls is influenced by thickness, as well as moisture content, three additional walls are prepared and preheated to reduce moisture content and then tested under fire exposure. The experimental results clearly show the temperatures measured close to the fire exposed surface of the thickest wall with 250 mm thickness is the highest in the temperatures measured at the same location of the thinner wall with 150 mm thickness because of the moisture clog that is formed inside the wall with 250 mm of thickness. This prevents heat being transferred to the opposite side of the heated surface. This is also confirmed by the thermal behavior of the preheated walls, showing that the temperature is well distributed in the preheated walls as compared to that in non-preheated walls. Finite element models including moisture clog zone are generated to simulate fire tests with consideration of moisture clog effect. The temperature distributions of the models predicted from the transient heat analyses are compared with experimental results and show good agreements. In addition, parametric studies are performed with various moisture contents in order to investigate effect of moisture contents on the thermal behaviors of the concrete walls.

• Journal of Korea Multimedia Society
• /
• v.2 no.4
• /
• pp.476-489
• /
• 1999

HW/SW codesign is integrated design of systems implemented using both hardware and software components. Many design tools has been developed to support this new paradigm, so far. Current codesign tools are not widely used as been expected because of variety problems - rapidly evolving technology, platform dependency, absence of standard specification method, inconsistent user interface, varying target system, different functionality In this paper, we propose a web-based distributed HW/SW codesign environment to remedy this kinds of problem. Our codesign environment has object-based 3 tier client/server architecture. It supports collaborative workspace through session service. Fully object-oriented design of user interface(OOUI) enables easy extension without change of user Interface. Furthermore it contains transaction server and security server for efficient and safe transfer of design data. To show a validity of our design, we developed prototype of web-based HW/SW codesign environment called WebCEDA. Our model of HW/SW codesign can be used for web-based generic CAD tools.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.2
• /
• pp.19-30
• /
• 2020

Purpose: The ratio of the visually impaired is gradually increasing due to various causes such as natural aging, accidents, and environmental changes. Therefore, this study has two folds. Firstly, it aims to analyze the current satisfaction level with information facilities for the visually impaired. Secondly, it aims to examine the factors affecting the satisfaction with indoor information facilities. Through this study, it helps to identify problems of information facilities for the visually impaired and it works as a practical data for further improvements. Methods: For 50 visually impaired people, a telephone survey was conducted on the satisfaction with the braille blocks, braille signboards, braille information boards with tactile map, audio guide devices, and safety egress devices. Microsoft Excel and SPSS 26.0 were used for the analysis. Results: It was confirmed that the overall satisfaction with the indoor information facilities was very low. The more the visually impaired people recognized the installation standards, and the better the maintenance was, the higher the satisfaction. In the case of braille blocks and braille signboards, the effect of information transfer on satisfaction was relatively high. In the case of audio guide device and safety egress device, the standard suitability influenced satisfaction. Implications: The low level of satisfaction with the overall information facilities can impede visually impaired people from receiving practical help through the information facilities. Factors influencing the satisfaction level of each facility were identified, which makes it possible to prepare effective improvement measures.

• Parasites, Hosts and Diseases
• /
• v.46 no.2
• /
• pp.65-70
• /
• 2008

Artemisinin-based combination therapy (ACT) is currently promoted as a strategy for treating both uncomplicated and severe falciparum malaria, targeting asexual blood-stage Plasmodium falciparum parasites. However, the effect of ACT on sexual-stage parasites remains controversial. To determine the clearance of sexual-stage P. falciparum parasites from 342 uncomplicated, and 217 severe, adult malaria cases, we reviewed and followed peripheral blood sexualstage parasites for 4 wk after starting ACT. All patients presented with both asexual and sexual stage parasites on admission, and were treated with artesunate-mefloquine as the standard regimen. The results showed that all patients were asymptomatic and negative for asexual forms before discharge from hospital. The percentages of uncomplicated malaria patients positive for gametocytes on days 3, 7, 14, 21, and 28 were 41.5, 13.1, 3.8, 2.0, and 2.0%, while the percentages of gametocyte positive severe malaria patients on days 3, 7, 14, 21, and 28 were 33.6, 8.2, 2.7, 0.9, and 0.9%, respectively. Although all patients were negative for asexual parasites by day 7 after completion of the artesunate-mefloquine course, gametocytemia persisted in some patients. Thus, a gametocytocidal drug, e.g., primaquine, may be useful in combination with an artesunate-mefloquine regimen to clear gametocytes, so blocking transmission more effectively than artesunate alone, in malaria transmission areas.