• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.17-23
• /
• 2020

In this paper, collecting real-time data frames that occur during RS232 communication between an HMI and PLC of automation equipment by sniffing real-time information data frames through MCU without modification of the HMI or PLC, a method is proposed that allows users to collect data without being dependent on the modification of PLC and HMI systems. The user collects necessary information from the sniffing data through the parsing operation, and the original communication interface is maintained by transmitting the corresponding sniffing frame to the destination. The MCU's UART communication interface circuit is physically designed according to the RS232 communication standard, and this additionally improves efficiency more so than an interrupt-based system by using the DMA device inside the MCU. In addition, the data frame IO operation is performed by logically separating the work of the DMA interrupt service routine from the work of the main thread using the circular queue. Through this method, the user receives the sniffing data frame between the HMI and PLC in RS232 format, and the frame transfer between PLC and HMI arrives normally at the original destination. By sniffing the data frame without further modification of the PLC and HMI, it can be confirmed that it arrives at the user system normally.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.1
• /
• pp.13-31
• /
• 2019

Green spaces are recognised for the benefits. They bring to the quality of people's lives. However, since the 1980s there has been a general increase in poorly-managed green spaces. In an attempt to address this issue, green space policy has changed its focus on green space management through the gradual introduction of green space evaluation tools, such as the Green Flag Award (GFA). The GFA, as an established green space evaluation tool in the UK, reflects a shift in policy drivers of green spaces management. However, there is a lack of research investigating the contextualisation between a wide range of policy contexts and such green space evaluation tools (the GFA in this study). The aims of this study are therefore to explore the development of green space evaluation since the late 1990s, with respect to the growth of the GFA and its impact on other evaluation tools across the UK and several countries. To address the aims, this study employs in-depth literature reviews on UK green space policy mainly conducted by government. In addition, case studies are presented, focusing on the GFA and independent green space evaluation tools intrinsically derived from the GFA in the UK's cities and Nordic countries. Results show that based on the awareness of the severity of declining standards of green spaces, newly emerging policy arrangements have been adopted to address negative issues, which affect the standard of green spaces such as the transfer of responsibility for green space management, the implementation of Compulsory Competitive Tendering and ongoing budget cuts. Significantly, the GFA's indicators reflect the emerging changes of economic and social contexts associated with green spaces management where, in particular, the prospect of continuous budget cuts, which encourages communities to become involved in green space management. The GFA has widely contributed to leading such UK's cities and other countries to be able to create their independent green space evaluation tools in different approaches based on stakeholders' (mainly community) involvement in the decision-making process of green space evaluation. In conclusion, this study implies that successful green space evaluation tools do embody the value of green spaces and address drivers of emerging green space management with correspondence to the context of policy arrangements. Importantly, stakeholders have an opportunity to be involved in a partnership in the decision-making process through some green space evaluation tools. It is hoped that for well-managed green spaces this study will contribute valuable knowledge to our existing understanding of green space management in an era of austerity.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.243-254
• /
• 2021

This study analyzed the abuse of authority among the types of power abuse in educational institutions in order to create an educational climate in which democracy and equality are respected and to create a better education and an equal society. First, we analyzed the concept and cause of power abuse through literature research, and then explored the cases of members of educational institutions according to the type of abuse of authority through qualitative research to derive implications. As a result, abuse of authority within educational institutions were found as follows: additional work without consultation, transfer of duties, coercive and unilateral instructions using status, instructions violating laws and guidelines, private instructions for personal convenience, specific institutions, personal rights, and privacy. Based on this analysis, a policy was proposed. First, an agreed standard for abuse of authority, an institutional mechanism to mediate conflicts and complaints over abuse of authority, mandatory installation and legislation of the best decision body, active and transparent disclosure of information, and a shift to open and listening administration are needed. Second, analyzing and seeking ways to reduce overuse of authority in educational institutions will be the cornerstone for leading education's democracy and equality by creating a culture of mutual respect and communication among members of the organization. Hope that follow-up studies will be carried out and that the Gap-jil in educational institutions will be reduced to create a better educational environment.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.239-246
• /
• 2021

Characteristics of hydrodynamics and heat absorption by gas in a directly-irradiated fluidized bed particle receiver (50 mm-ID X 150 mm high) of SiC particles have been determined. Solid holdups of SiC particles show almost constant values with increasing gas velocity. Fine SiC particles (SiC II; dp=52 ㎛, ρs=2992 kg/㎥) showed low values of relative standard deviation of pressure drop across bed but high solids holdups in the freeboard region compared to coarse SiC particles (SiC I; dp=123 ㎛, ρs=3015 kg/㎥). The SiC II exhibited higher values of temperature difference normalized by irradiance due to the effect of additional solar heat absorption and heat transfer to the gas by the particles entrained in the freeboard region in addition to the efficient thermal diffusion of the solar heat received at bed surface. Heat absorption rate and efficiency increased with increasing the gas velocity and fluidization number. The SiC II showed maximum heat absorption rate of 17.8 W and thermal efficiency of 14.8%, which are about 33% higher than those of SiC I within the experimental gas velocity range.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.161-172
• /
• 2023

Safety education delivered to construction workers in a lecture manner has limitations in concentration and immersion, so delivery power and interest are low. In order to improve unstable behavior through education and prevent safety accidents, it is necessary to change the paradigm to hands-on education. Purpose: Experiential safety education aims to contribute to preventing accidents for construction workers by quickly recognizing risks, improving emergency response skills, and verifying the effectiveness of pre- and post-learning. Method: Based on a survey of workers who experienced the same work environment as the actual construction site, an opinion survey on the pre- and post-safety experience education and a variable measurement tool were planned, and a research hypothesis was established. Results: The Bayesian theory and MC simulation analysis were used to analyze the structural equation model, and the change in construction worker behavior was confirmed through the intended safety (A), non-experiential education in the sub-area of anxiety (B), average, standard deviation, and minimum and maximum values. Conclusion: The effect of education and industrial accidents are reduced only when construction workers are motivated to participate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.105-113
• /
• 2008

Solar radiation induces non-uniform temperature distribution in the bridge structure depending on the shape of the structure and shadows cast on it. Especially in the case of curved steel box girder bridges, non-uniform temperature distribution caused by solar radiation may lead to unusual load effects enough to damage the support or even topple the whole curved bridge structure if not designed properly. At present, it is very difficult to design bridges in relation to solar radiation because it is not known exactly how varying temperature distribution affects bridges; at least not specific enough for adoption in design. Standard regulations related to this matter are likewise not complete. In this study, the thermal behavior of curved steel box girder bridges is analyzed while taking the solar radiation effect into consideration. For the analysis, a method of predicting the 3-dimensional temperature distribution of curved bridges was developed. It uses a theoretical solar radiation energy equation together with a commercial FEM program. The behavior of the curved steel box girder bridges was examined using the developed method, while taking into consideration the diverse range of bridge azimuth angles and radii. This study also provides reference data for the thermal design of curved steel box girder bridges under solar radiation, which can be used to develop design guidelines.

• Korean Journal of Radiology
• /
• v.22 no.9
• /
• pp.1514-1524
• /
• 2021

Objective: To develop a radiomics risk score based on dynamic contrast-enhanced (DCE) MRI for prognosis prediction in patients with glioblastoma. Materials and Methods: One hundred and fifty patients (92 male [61.3%]; mean age ± standard deviation, 60.5 ± 13.5 years) with glioblastoma who underwent preoperative MRI were enrolled in the study. Six hundred and forty-two radiomic features were extracted from volume transfer constant (K^trans), fractional volume of vascular plasma space (V_p), and fractional volume of extravascular extracellular space (V_e) maps of DCE MRI, wherein the regions of interest were based on both T1-weighted contrast-enhancing areas and non-enhancing T2 hyperintense areas. Using feature selection algorithms, salient radiomic features were selected from the 642 features. Next, a radiomics risk score was developed using a weighted combination of the selected features in the discovery set (n = 105); the risk score was validated in the validation set (n = 45) by investigating the difference in prognosis between the "radiomics risk score" groups. Finally, multivariable Cox regression analysis for progression-free survival was performed using the radiomics risk score and clinical variables as covariates. Results: 16 radiomic features obtained from non-enhancing T2 hyperintense areas were selected among the 642 features identified. The radiomics risk score was used to stratify high- and low-risk groups in both the discovery and validation sets (both p < 0.001 by the log-rank test). The radiomics risk score and presence of isocitrate dehydrogenase (IDH) mutation showed independent associations with progression-free survival in opposite directions (hazard ratio, 3.56; p = 0.004 and hazard ratio, 0.34; p = 0.022, respectively). Conclusion: We developed and validated the "radiomics risk score" from the features of DCE MRI based on non-enhancing T2 hyperintense areas for risk stratification of patients with glioblastoma. It was associated with progression-free survival independently of IDH mutation status.

• Korean Journal of Radiology
• /
• v.21 no.6
• /
• pp.707-716
• /
• 2020

Objective: To evaluate pharmacokinetic variables from contrast-enhancing lesions (CELs) and non-enhancing T2 high signal intensity lesions (NE-T2HSILs) on dynamic contrast-enhanced (DCE) magnetic resonance (MR) imaging for predicting progression-free survival (PFS) in glioblastoma (GBM) patients. Materials and Methods: Sixty-four GBM patients who had undergone preoperative DCE MR imaging and received standard treatment were retrospectively included. We analyzed the pharmacokinetic variables of the volume transfer constant (Ktrans) and volume fraction of extravascular extracellular space within the CEL and NE-T2HSIL of the entire tumor. Univariate and multivariate Cox regression analyses were performed using preoperative clinical characteristics, pharmacokinetic variables of DCE MR imaging, and postoperative molecular biomarkers to predict PFS. Results: The increased mean Ktrans of the CEL, increased 95th percentile Ktrans of the CELs, and absence of methylated O⁶-methylguanine-DNA methyltransferase promoter were relevant adverse variables for PFS in the univariate analysis (p = 0.041, p = 0.032, and p = 0.083, respectively). The Kaplan-Meier survival curves demonstrated that PFS was significantly shorter in patients with a mean Ktrans of the CEL > 0.068 and 95th percentile Ktrans of the CEL > 0.223 (log-rank p = 0.038 and p = 0.041, respectively). However, only mean Ktrans of the CEL was significantly associated with PFS (p = 0.024; hazard ratio, 553.08; 95% confidence interval, 2.27-134756.74) in the multivariate Cox proportional hazard analysis. None of the pharmacokinetic variables from NE-T2HSILs were significantly related to PFS. Conclusion: Among the pharmacokinetic variables extracted from CELs and NE-T2HSILs on preoperative DCE MR imaging, the mean Ktrans of CELs exhibits potential as a useful imaging predictor of PFS in GBM patients.

• Journal of agricultural medicine and community health
• /
• v.27 no.1
• /
• pp.115-123
• /
• 2002

Objective: The aim of this study was to evaluate the patterns of helicopter emergency medical services (HEMS) in Ullung Island. Methods : The authors reviewed the records from emergency room diaries and the lists of helicopter transfers in the Ullung Public Health Medical Center over the 5-year period from Jan 1, 1997 to Dec 31, 2001. Results : One hundred thirteen cases were transferred by helicopters in 88 flights. According to year, the number of flights was 13(14.8%) and the number of cases was 15(13.3%) in 1997; 17(19.3%) and 21(18.6%) in 1998; 18(20.5%) and 20(17.7%) in 1999; 17(19.3%) and 20(17.7%) in 2000; and 23(26.1%) and 37(32.7%) in 2001. According to the kind of helicopter, the number of flights was 46(52.3%) and the number of cases was 60(53.1%) by Maritime police; and 19(21.6%) and 28(25.1%) by 119 rescue. According to time zone, there were no night flights. According to sex and age, there were 75 male cases(66.4%) and 28 cases(28.3%) of patients aged sixty years and over. The number of flights was 11(12.5%) and the number of cases was 15(13.3%) in November; 10 flights(11.4%) and 14 cases(12.4%) in March; and 7 cases(8.0%) in each of September, October and April. The most common season of helicopter transfer cases was autumn. According to transfer area, there were 48 cases (42.5%) in Pohang city, Gyeonsangbukdo; 35(31.0%) in Gangnung city, Gangwondo; and 17(15.0%) in Daegu metropolitan city. According to condition, there were 27 cases(23.9%) of cerebro-vascular accident, 13(11.5%) of fracture and 11(9.7%) of head injury. According to admission department, there were 42 cases(37.2%) in Neurosurgery, 21(18.6%) in Internal Medicine and 13(11.5%) in Orthopedic Surgery. According tothe Korea Standard Classification of Disease(3-KSCD), circulatory systemic disease(IX) and injury, intoxication and others (XIX) were the two most frequent categories with 34 cases(30.1%) each, followed by digestive system disease (XI) with 23 cases(20.4%). Conclusions : HEMS in Ullung Island leave much to be desired. Helicopters cannot make a night flight and are not equipped with medical facilities. HEMS in islands such as Ullung Island are essential. We hope that night flights, equipment-monitoring systems for emergency patients in the helicopters, and a law related to HEMS in the island will all be established.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.