• Journal of the Korea Society for Simulation
• /
• v.23 no.1
• /
• pp.11-20
• /
• 2014

In this paper, we analyze the performance and reliability of the next-generation KRTCS (Korea Radio Train System) network. The KRTCS has been designed to manage and control the overall status of trains including location, speed, stop position, door open/close status and interior monitoring and so forth. System faults of the KRTCS operation can lead to the disruption of smooth train flow, even to terrible traffic accident. Prior to installation we need to assure the reliability of the designed KRTCS system. For this purpose, we simulated and analyzed the KRTCS network using QualNet simulator, assuming the various environmental operation data of train flows and communication faults that can be found in real telecommunication networks.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.402-409
• /
• 2014

Wireless local area network (WLAN) is a widely used wireless access method due to its easy usability and excellent performance. However, its performance degrades significantly as the number of users increases. In busy train stations, where the number of WLAN users are large and, more importantly the number of simultaneous packet transmission attempts is extremely large due to the time synchronization upon train arrival, the packet transmission delay problem is very severe and almost impossible for WLAN stations to initiate communication with WLAN networks. In this paper, a novel distributed WLAN access scheme for efficient WLAN communication in busy train stations is proposed. Using the proposed scheme, WLAN access delay can be significantly reduced under highly congested traffic environments. Therefore, a significant performance enhancement for the WLAN performance used in the Communication Based Train Control (CBTC) can be achieved.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.485-490
• /
• 2006

According to the computerization of railway signaling systems, the interface link between the signaling systems has been replaced by the digital communication channel. At the same time, the importance of the communication link is more pronounced than before. In this paper, new Network-based protocol between railway signaling and SCADA (Supervisory Control and Data Acquisition system) has designed and the overview of designed protocol is briefly represented. And also this paper addresses analysis of newly designed train control systems. Fame error rates of the data transmissions are calculated and compared for the two cases that the CTC (Centralized Traffic Control)/SCADA has an extra data transmission error control (CRC16) besides the inherent error control of the Ethernet and that the CTC/SCADA has no extra data transmission error control. With simulation results it has been verified that the additional error control code contributes to lowering the frame error rate. It will be expected to increase the safety, reliability and efficiency of maintenance of the signaling systems by using the designed protocol for railway signaling system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.372-376
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. In this paper, an electro-mechanical actuator for clutch-by-wire (CBW) system is implemented as the first stage for the development of automated manual transmissions. The prototype of CBW actuator is designed systematically, which is composed of the electric motor, worm & worm wheel and crank mechanism. And the test rig is developed to perform the basic function test for the automatic clutch actuation. The developed prototype is validated by the experimental results on the test rig.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.12-17
• /
• 1996

With the increase in discomfort of living by serious traffic noise pollution, the desire of relieving from discomfort is boosted up more than ever. For this reason, the researches on environmental impact assessmient and noise pollution control are highly required. This research was aimed to analyze the physical characteristics of noise caused by high-speed train in foreign countries by literature survey and field data. And with the attained results, the exterior noise level around Chon-An station, the first station planned for the high-speed train in this country, was estimated. The results of this study might be used as a tool for predicting the unavoidable noise, lessening the noise impact caused by the high-speed train, and preparing the noise prevention measures for the interior space and the exterior around stations.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.1038-1046
• /
• 2014

Lithium-ion batteries are widely used in hybrid and pure electric vehicles. State-of-charge (SOC) estimation is a fundamental issue in vehicle power train control and battery management systems. This study proposes a novel model-based SOC estimation method that applies closed-loop state observer theory and a comprehensive battery model. The state-space model of lithium-ion battery is developed based on a three-order resistor-capacitor equivalent circuit model. The least square algorithm is used to identify model parameters. A multi-state closed-loop state observer is designed to predict the open-circuit voltage (OCV) of a battery based on the battery state-space model. Battery SOC can then be estimated based on the corresponding relationship between battery OCV and SOC. Finally, practical driving tests that use two types of typical driving cycle are performed to verify the proposed SOC estimation method. Test results prove that the proposed estimation method is reasonably accurate and exhibits accuracy in estimating SOC within 2% under different driving cycles.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.283-285
• /
• 2003

Metro is taking an important part as a public transportation of densely populated area. but according to request of increasing transportation demand and improving service for passengers, minimizing headway, functional improvement of safety facility, improving riding comfort are needed. Also, it is the time for Seoul metro's signalling system to be improved into a new one as it has been opened to traffic for over 20 years and its signalling system is becoming superannuated. this paper reviewed the considerations at improving a signalling system and its solution.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.229-230
• /
• 2004

궤도회로를 사용하지 않고 무선통신을 이용하여 지상-차상간 정보를 송수신하고 열차속도를 제어하는 CBTC 시스템에서, CBTC 차상장치와 추진제어장치와 제동제어장치, 출입문 개폐장치 등의 차량내 각종 차량제어장치들간의 인터페이스를 최적화하기 위한 방안에 대하여 검토하였다. 또한 현재 국가연구개발사업으로 추진중인 경량전철 신호제어시스템 개발에 적용하여, 시스템 최적화를 통한 시스템 설계 및 시험평가에 적용하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.1
• /
• pp.67-73
• /
• 2001

This paper proposes a new scheduling algorithm for broadband ATM access network. The existed scheduling algorithms (Train, Chao. Dynamic scheduling algorithm) have high cell loss rate and waste channel. These proposed mechanism utilize to control of multimedia services based on the quality of service level of the input traffic This paper suggests a functional architecture of scheduling and the scheduling algorithm to satisfy various QoS requirements. The performance measures of interest, namely steady-state cell loss probability and average delay, average delay, are discussed by simulation results.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.843-848
• /
• 2005

Currently the train traffic control system is built wholly by one package construction. It is under variable circumstance such as variation of signalling equipment and station expansion. This condition reduces system reliability and availability. And the term of system change is longer than 10 years, so it is hard to update to the latest technology and the new function. In order to do the system should be replaced to new one completely. The step by step construction of ADS(Autonomous Decentralized System) is one of the solution. So the simulation of it on the real station help to find system requirement and verify good of online expansion and online test.