• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1466-1472
• /
• 2008

To minimize the train operation interruptions and train exchanges, the RF transmission system is proposed. The current control room of the Seoul Metro has information of the train movement through the Total Traffic Control System, but it does not have information of the train itself, rail status, and other facilities' status. When some trouble occurs during train operation, the train crews should report the control room about the trouble and fix it. If the control room has exact information of the trouble, the expert in the control room can help the crews to fix the trouble swiftly and exactly. Since the crews are busy taking care of the trouble, they often miss to report the control room on time. The proposed RF transmission system relays the information of the train to the control room automatically in real time, and makes it possible to provide the passengers good service by reducing the train operation interruptions and train exchanges.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1510-1512
• /
• 2004

Platform Screen Door System is a facility on platform to separate platform from track, having automatic sliding door structures interlocked to opening and closing of train door with integrated control unit. When a train comes to a stop at a designed position at a station, onboard ATC/ATO system transmits train berth signal to wayside signaling system. In case of automatic/driverless operation, opening and closing of the Platform Screen Door will be controlled by wayside signaling system. Unfortunately, we often see the case in news that passengers fall into track and their contact with train lead to critical accidents. However, passengers will be free from such accidents on the platform with the Platform Screen Door System. Especially during the rush hours, to ensure passenger's safety and smooth getting on & off, it is necessary to arrange. some station staffs on the platform without the Platform Screen Door System. On the other hand, the Platform Screen Door System will realize such operation by fewer staffs. Due to the above reasons, the Platform Screen Door System is becoming more popular in subway system recently.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.457-465
• /
• 2014

This study proposes a policy for urban railway travel demand management system in order to decrease the load factor of the Seoul metro Circle line, particularly for the segment between Sadang and Samsung stations, through analyzing the transit smart card data. We propose mixed train operations of the existing Circle line and a line that goes toward Samsung station in order to transport passengers that have two distinct groups: those with the destination of Samsung station and those with destinations after Samsung station. The introduction of a mixed train operation that encourages passengers passing through Samsung station to take a Circle line train will decrease the congested load factor by 11.3% during the morning peak hours using the mixed train operation of the Circle and Samsung lines. This policy could be an effective method to decrease the load factor and improve the comfort of rail passengers without extra investment in the railway facilities.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.480-486
• /
• 2003

This paper proposes the connection without cables among display devices in a train using piconet of the Bluetooth. Nowadays, each train has a number of the display devices that are connected with many cables to lead the passengers, so it has the waste of resource and factor of fault. This paper proposes the improvement schemes of those problems in a train using piconet of the bluetooth with low cost, low power, and high security.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.617-622
• /
• 2003

Light Flickering of the lamp(fluorescent lamp) with voltage fluctuation operates as an factor harmful to train passengers which is subjective to them. Recently, international flickering standard(IEC61000-3-3) are applied all over the world. However, there are not any study preparing for regulation about light flickering inside running train. In this study, the Flicker phenomenon is investigated from several references and also how the flickermeter is configured and defined. Flicker evaluation using it are studied.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.8
• /
• pp.349-356
• /
• 2001

The dynamic behavior of high speed train is very Important because the railway should be safe and Is satisfied tilth the rode comfort of passengers. The train is composed of many suspension components. such as 1st springs, 1st dampers, 2nd springs and 2nd dampers, that have an influence on the dynamic characteristics of high speed train. Also, the wheel/rail shapes, the track conditions and geometry and many environmental factors, such as rain, snow and wind. affect the dynamic behavior of high speed train. This paper reviews the effect of wind and track conditions on the dynamic behavior of high speed train. The VAMPIRE program Is used for this simulation. The result of simulation shows that the high speed train should not be operated when the wind velocity is beyond 34.5 m/sec.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.309-311
• /
• 2006

A train having a system which tilts the train body to reduce the lateral acceleration experienced by passengers when operating around curves, allowing the train to run at higher speeds through curves than non-tilting trains. A tilting train may have a maximum design service cant deficiency of up to $8^{\circ}$. In this case there is, at worst, a margin of only $6^{\circ}$ cant deficiency between a train travelling at enhanced permissible speed and its roll-over resistance. This is a significant reduction in the margin against overturning compared to that offered at permissible speeds. Particular consideration therefore needs to be given to the adequacy of the margin and the additional controls against overturning required when trains travel at enhanced permissible speeds. This paper deals with the speed supervision system of tilting train through curves.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.686-693
• /
• 2003

An intensive study was conducted for crashworthiness structural design of recently developed Korean High Speed Train. Two nam design concepts are setup to protect the both crews and passengers from serious injury at heavy collision accidents, and to reduce damages of the train itself at light collision accidents. For occupant protection a collision against a movable 15 tons rigid obstacle at 110 kph and a train-to-train collision at 30 kph were selected as accident scenarios for the heavy collisions based on the train accident investigations. A train-to-train collision at 8 kph was used for the light collisions. The crashworthiness behaviors of KHST have been evaluated numerically using the finite element method. Also, one-dimensional collision analyses show good crashworthy responses in a full rake consist and 3-dimensional shell element analyses do in the front-end structures of the power car. Occupant analyses and sled tests demonstrated that KHST performs well enough to protect occupants under the considered accident scenarios.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1881-1888
• /
• 2008

As the ticket issuing methods have been diversified for the convenience of the passengers such as ticketless service(SMS ticket, e-ticket, home ticket), automatic ticket issuing machine and consignment ticket sale, maintaining the current number of ticket booth has been becoming a issue. Too many booth can cause the inefficiency of the cost of labor. According to the Charter of Customer Service of Korail, on the other hand, 95% of passengers have to purchase a train ticket within 5 minutes. This study was designed to present a decision making model for the optimum number of ticket booth which can affect an efficient operation of train station and improvement of customer convenience. And, this paper shows the proper manpower of ticket booth and the change of customer waiting time by analyzing the arrival and ticket issuing time of passengers based on 'Queueing Theory'. However, it is insufficient to be generalized due to some limitations of analysis. This study will contribute to improve customer satisfaction by reducing the waiting time at the ticket booth. In addition, presenting the optimum number of booth is expected to have an effect on the increase of productivity and cost savings.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.671-674
• /
• 2007

With increasing concerns of indoor air quality, $CO_2$ concentration in the public transportation, such as train, bus, and subway, draws big interests. The $CO_2$ concentration in the indoor air is regarded as index of ventilation status rather than that of adverse health effect. In this study, we measured the time-series of $CO_2$ concentrations in the subway saloon at the Subway line 1 (Suwon-station to Cheongyangri-station) with the number of passengers on board. At the same time, the concentration of particulate matter (PM), temperature, and humidity were monitored. It was found that the $CO_2$ concentration was correlated linearly with number of passengers and the relation function is suggested for the prediction of $CO_2$ conecntration by the number of passengers.