• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.75-78
• /
• 1998

In this paper, we propose a new cell discarding and scheduling scheme which reduce cell loss rate by measuring, in real time, the number of discarded cells in the queuing system with a different loss priority for each class of service such that each class of service meets its cell loss rate requirements and reduce average delay rate for the traffic that is sensitive in cell delay in output buffer of the ATM switch. Throughout the computer simulation, the existing scheduling scheme and proposed scheme are compared with respect to cell loss rate and average delay time.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.105-108
• /
• 2002

This paper analytical models of a centralized approach based on SNMP Protocol, distributed approach based on mobile agent, and mixed model which is tile existing mobile agent model in order to overcome large communication numbers of SNMP and accumulated data of mobile agent. And then, we compare and analyze these analytical models. Performance evaluation results show that performance of mobile agent and the mixed model is less sensitive to the network traffic and more profitable for complex network environment than that of SNMP.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.597-606
• /
• 2001

In this paper, we propose the delay sensitive traffic and a high bandwidth QoS service in order to supply real-time traffic such as VoIP, multimedia service. We use IntServ over DiffServ network to supply end-to-end QoS service in the IETF. We define the proposed QoS services which are Best, Good, Default service. We analyze the performance using NS simulator with end to end QoS service in IntServ over DiffServ network. The proposed billing system uses the Accounting, Authentication, Authorization (AAA) functions of RADIUS protocol and proposes the dynamic pricing method according to network usage state using end-to-end QoS of IntServ over DiffServ network. In order to secure billing system, we design and implement audit trail system by the IEEE POSIX.1E standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1304-1314
• /
• 1993

During the last several years, the demand of mobile communication is increasing rapidly due to the convenience of usage. Therefore, the evoluation scenario toward the new cellular network is needed. In this paper, the future prospect of cellular network is considered, and movable-boundary TDMA/BTMA protocol is proposed as a new voice/data integrated multiple access protocol for the future cellular packet radio networks. Then, the performance of movable-bounary TDMA/BTMA protocol is analyzed and compared with that of PRMA protocol by computer simulation. In the proposed movable-boundary TDMA/BTMA protocol, the voice traffic sensitive to delay time is served by TDMA protocol and the data traffic sensitive to loss is served by BTMA protocol. Also, the boundary of voice and data can be moved adaptively by usign SYN character, control byte, voice call counter, ect. Therefore. it could be seen that the performance of movable-boundary TDMA/BTMA protocol is better than that of PRMA protocol with respect to delay and throughput.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.1-14
• /
• 2020

Recently, M/G/1 priority queues with a finite buffer for high-priority customers and an infinite buffer for low-priority customers have applied to the analysis of communication systems with two heterogeneous traffics : delay-sensitive traffic and loss-sensitive traffic. However, these studies are limited to M/G/1 priority queues with finite and infinite buffers under a work-conserving priority discipline such as the nonpreemptive or preemptive resume priority discipline. In many situations, if a service is preempted, then the preempted service should be completely repeated when the server is available for it. This study extends the previous studies to M/G/1 priority queues with finite and infinite buffers under the preemptive repeat-different and preemptive repeat-identical priority disciplines. We derive the loss probability of high-priority customers and the waiting time distributions of high- and low-priority customers. In order to do this, we utilize the delay cycle analysis of finite-buffer M/G/1/K queues, which has been recently developed for the analysis of M/G/1 priority queues with finite and infinite buffers, and combine it with the analysis of the service time structure of a low-priority customer for the preemptive-repeat and preemptive-identical priority disciplines. We also present numerical examples to explore the impact of the size of the finite buffer and the arrival rates and service distributions of both classes on the system performance for various preemptive priority disciplines.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.1-8
• /
• 1998

In this paper, we analyze the probability of soft handoff and hard handoff which served in DS-CDMA cellular system, and propose a new handoff control scheme. The object of proposed scheme is to reduce the hard handoff probability of delay sensitive calls which are very sensitive to transmission errors. In this scheme, if soft handoff is not possible, for a delay sensitive call, a delay insensitive call using the same frequency channel that a handoff call is using is handed off to one of other frequency channels and the traffic channel released by delay insensitive call's handoff is assigned to a delay sensitive call for soft handoff. A performance of the proposed scheme was evaluated through computer simulation.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.15-19
• /
• 2012

Occupant footfalls are often the most critical source of floor vibration on upper floors of buildings. Floor motions can degrade the performance of imaging equipment, disrupt sensitive research equipment, and cause discomfort for the occupants. It is essential that low-vibration environments be provided for functionality of sensitive spaces on floors above grade. This requires a sufficiently stiff and massive floor structure that effectively resists the forces exerted from user traffic. Over the past 25 years, generic vibration limits have been developed, which provide frequency dependent sensitivities for wide classes of equipment, and are used extensively in lab design for healthcare and research facilities. The same basis for these curves can be used to quantify acceptable limits of vibration for human comfort, depending on the intended occupancy of the space. When available, manufacturer's vibration criteria for sensitive equipment are expressed in units of acceleration, velocity or displacement and can be specified as zero-to-peak, peak-to-peak, or root-mean-square (rms) with varying frequency ranges and resolutions. Several approaches to prediction of floor vibrations are currently applied in practice. Each method is traceable to fundamental structural dynamics, differing only in the level of complexity assumed for the system response, and the required information for use as model inputs. Three commonly used models are described, as well as key features they possess that make them attractive to use for various applications. A case study is presented of a tall building which has fitness areas on two of the upper floors. The analysis predicted that the motions experienced would be within the given criteria, but showed that if the floor had been more flexible, the potential exists for a locked-in resonance response which could have been felt over large portions of the building.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.49-54
• /
• 2016

Data delivery is very challenging in VANETs because of its unique characteristics, such as fast topology change, frequent disruptions, and rare contact opportunities. This paper tries to explore the scope of 3G-assisted data delivery in a VANET within a budget constraint of 3G traffic. It is started from the simple S_Random (Srand) and finally reached the 3GSDD, i.e., the proposed algorithm. The performance evaluation of different algorithms is done through the two metrics delivery ratio and average delay. A third function utility is created to reflect the above two metrics and is used to find out the best algorithm. A packet can either be delivered via multihop transmissions in the VANET or via 3G. The main challenge is to decide which set of packets should be selected for 3G transmissions and when to deliver them via 3G. The aim is to select and send those packets through 3G that are most sensitive and requiring immediate attention. Through appropriate communication mechanism, these sensitive information are delivered via VANET for 3G transmissions. This way the sensitive information which could not be transmitted through normal VANET will certainly find its destination through 3G transmission unconditionally and with top priority. The delivery ratio of the packets can also be maximized by this system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.116-126
• /
• 2013

Weather factor to affect driver's driving environment are due to changes in weather conditions is caused rainfall, snowfall, fog etc and the reducing of road capacity and because deteriorating weather could be affect the headway and vehicle speed and the decrease in lane caused by an accident occurs that was analyzed that bad weather occur congestion greater than on the clear day. Bad weather to reduce of the driver's visibility was analysed the sensitive to changes in travel speed and traffic accident to appears high characteristics according to weather conditions on the expressway(higher speed) than general road. As a result, visibility have been determined to be important factor in changes of the highway traffic flow characteristics. Therefore, in this study, we selected traffic volume and travle speed that have a major impact on high-speed expressway basic segments as importance effect factor and we selected to subject of analysis among the Metropolitan Expressway that it could be obtained certain level of traffic volume data and we studied the changing of expressway traffic flow due to change visibility after the collecting of meteorological and traffic data. In order to perform this study, data collection and analysis methods were established through the existing literature and we had selected level of visibility of the expressway and we had performed the statistical verification. Finally, we had calculated the rate of change of expressway traffic flow characteristics due to visibility and we had come up with a way to apply at capacity and service level analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.12-22
• /
• 2000

This paper presents the window-based permit distribution scheme for efficient medium access control to support multiclass traffic in APON(ATM over passive optical network). The proposed MAC protocol considers the characteristics of QoS(Quality of Service) for various traffic classes. A periodic RAU(request access unit) in upstream direction, includes dedicative request fields for each traffic category within the request slot. The transmission of upstream cell is permitted by the proposed window-based spacing scheme which distributes the requested traffic into several segments in the unit of one spacing window. The delay sensitive traffic source such as CBR or VBR with the stringent requirements on CDV and delay, is allocated prior to any other class. In order to reduce the CDV, so that the permit arrival rate close to the cell arrival rate, Running-Window algorithm is applied to permit distribution processing for these classes. The ABR traffic, which has not-strict CDV or delay criteria, is allocated flexibly to the residual bandwidth in FIFO manner. UBR traffic is allocated with the lowest priority for the remaining capacity. The performance of proposed protocol is evaluated in terms of transfer delay and 1-point CDV according to various offered load. The simulation results show that our protocol has the prominent improvement on CDV and delay performance with compared to the previous protocol.