• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10B
• /
• pp.866-879
• /
• 2004

This paper presents a pricing model for maximizing a service provider's profit, taking into account consumers' quality-of-service dependent willingness to pay, in integrated voice/data mobile services. For the voice and the data services, time-sensitive pricing and volume-sensitive pricing mechanism will be applied, respectively, as in the case of Korea's mobile service market. Assuming that consumers are very sensitive to call interruption during handoff moments, the model presented here considers reserving guard channels exclusively for handoff traffic, in the process of frequency channels allocation, as well as guaranteeing consumers quality of service regarding call interruption rate. Ultimately, this model proposes a means to guarantee the quality of service in the short term, through pricing strategies as well as channel allocation policies, and the simulation results show that without expanding system resources, there exists a trade-off between profit and quality-of-service guarantee.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.303-310
• /
• 2007

The vehicle noise is classified into interior and radiated exterior noise. And it influences on consumer‘s vehicle decision and traffic noise environment very much. In case of the vehicle exterior noise, it is related with traffic noise and in case of the interior noise, it is related with driver’s and passenger‘s sensitivity quality. Because these influenced on drivers and traffic environment, so standards are restricted by the laws and regulated for the measurement. But, the existence standards measuring the only sound pressure level are limit to reflect consumer’s sensitive aspects. Therefore in this study, the recent standards and laws were searched about domestic and abroad papers and the testing mode for the sound quality (SQ) evaluation was constructed about the vehicle interior noise. Finally, we aimed at the standard establishment to evaluate the vehicle interior SQ using statistics method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1230-1237
• /
• 2007

The vehicle noise is classified into interior and radiated exterior noise. And it influences on consumer's vehicle decision and traffic noise environment very much. In case of the vehicle exterior noise, it is related with traffic noise and in case of the interior noise, it is related with driver's and passenger's sensitivity quality. Because these influenced on drivers and traffic environment, so standards are restricted by the laws and regulated for the measurement. But, the existence standards measuring the only sound pressure level are limit to reflect consumer's sensitive aspects. Therefore in this study, the recent standards and laws were searched about domestic and abroad papers and the testing mode for the sound quality(SQ) evaluation was constructed about the vehicle interior noise. Finally, we aimed at the standard establishment to evaluate the vehicle interior SQ using statistics method.

• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.9-17
• /
• 2001

Ad-Hoc networks consist of a set of mobile hosts that communicate using wireless links, without the use of other communicate support facilities (such as base stations). The topology of an Ad-Hoc network changes due to the movement of mobile host. which may lead to sudden packet loss. Recently, a large amount of research has focused on the routing protocols needed in such an environment. but researches about Internet traffic performance analysis were unexhausted. Accordingly, we have simulated Ad-Hoc mobile network that using AODV routing protocol and Ad-Hoc mobile network topology size and node speed as simulation estimation-factor to analysis traffic performance. As the result of the simulation, we identify that TCP /Reno was more sensitive than TCP/Sack about node speed and a number of the node.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.3
• /
• pp.51-62
• /
• 1996

Electro sensitive traffic system can not consider passenger car unit, so it causes start up delay time and passenger waiting time. In this paper, it antecedently creates passenger car unit at the bottom intersection using neural network. But, sometimes it can make mistakes due to changes in car weight, car speed, and passing area. Therefore, it consequently reduces the car waiting time and start-up delay time using fuzzy control of feed-back data. Moreover, to prevent spillback, it can adapt control even though upper traffic intersection has a different saturation rate, road length, road slope and road width.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.4
• /
• pp.3-38
• /
• 1996

The mobile station shall convolutionally encode the data transmitted on the reverse traffic channel and the access channel prior to interleaving. Code symbols output from the convolutional encoder are repeated before being interleaved except the 9600 bps data rate. All the symbols are then interleaved, 64-ary orthogonal modulation, direct-sequence spreading, quadrature spreading, baseband filtering and QPSK transmission. The sync, paging, and forward traffic channel except the pilot channel in the forward CDMA channel are convolutionally encoded, block interleaved, spread with Walsh function at a fixed chip rate of 1.2288 Mcps to provide orthogonal channelization among all code channels. Following the spreading operation, the I and Q impulses are applied to respective baseband filters. After that, these impulses shall be transmitted by QPSK. Authentication in the CDMA system is the process for confirming the identity of the mobile station by exchanging information between a mobile station and the base station. The authentication scheme is to generate a 18-bit hash code from the 152-bit message length appended with 24-bit or 40-bit padding. Several techniques are proposed for the authentication data computation in this paper. To protect sensitive subscriber information, it shall be required enciphering ceratin fields of selected traffic channel signaling messages. The message encryption can be accomplished in two ways, i.e., external encryption and internal encryption.

• Journal of KIISE:Information Networking
• /
• v.27 no.1
• /
• pp.68-75
• /
• 2000

In this paper, a media access control protocol is proposed for voice/data integrated services in the packet CDMA network, and the performance of the proposed protocol is analyzed. The proposed protocol uses the spreading code sensing and the reservation schemes. This protocol gives higher priority to the delay-sensitive voice traffic than to the data traffic. A voice terminal can reserve an available spreading code during a talkspurt to transmit multiple voice packets. On the other hand, whenever a data packet is generated, the data terminal transmits the packet through one of the available spreading codes that are not used by the voice terminals. In this protocol, the voice packets do not come into collision with the data packets. The numerical results show that this protocol can increase the maximum number of voice terminals. The performance for the data traffic degrades by increasing the voice traffic load because of the low priority. But it shows that the data traffic performance can be increased in proportion to the number of spreading codes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.717-719
• /
• 2015

The research and development of the unmanned vehicle is being carried out actively in domestic and foreign countries. The research is being carried out to provide various services so that the weakness of system such as conventional 2D-based navigation systems can be supplemented and the driving can be safer. This paper suggests the method that enables real-time video processing in more efficient way by realizing the location detection and signal recognition technique of traffic signals in video. In order to overcome the limit of conventional methods that have a difficulty in analyzing the signal as it is sensitive to brightness change, the proposed method realizes the program that grasps the depth data in front of the vehicle using video processing, analyzes the signal by detecting traffic signal and estimates color components of traffic signal in front and the distance between traffic signal and the vehicle.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.248-250
• /
• 2008

This paper proposes a prediction method to prevent traffic accident and reduce to vehicle waiting time using neural network. Computer simulation results proved reducing average vehicle waiting time which proposed coordinating green time better than electro-sensitive traffic light system dose not consider coordinating green time. Moreover, we present neural network approach for traffic accident prediction with unnormalized (actual or original collected) data. This approach is not consider the maximum value of data and possible use the network without normalizing but the predictive accuracy is better. Also, the unnormalized method shows better predictive accuracy than the normalized method given by maximum value. Therefore, we can make the best use of this model in software reliability prediction using unnormalized data. Computer simulation results proved reducing traffic accident waiting time which proposed neural network better than conventional system dosen't consider neural network.

• Structural Engineering and Mechanics
• /
• v.78 no.2
• /
• pp.125-134
• /
• 2021

In this paper, the effects of Tuned Mass dampers (TMDs) on the reduction of the vertical vibrations of a real horizontally curved steel box-girder bridge due to different traffic loads are numerically investigated. The performance of TMDs to reduce the bridge vibrations can be affected by the parameters such as dynamic characteristics of TMDs, the location of TMDs, the speed and weight of vehicles. In the first part of this study, the effects of mass ratio, damping percentage, frequency ratio, and location of TMDs on the performance of TMDs to decrease vertical vibrations of different sections of bridge deck are evaluated. In the second part, the performance of TMD is investigated for different speeds and weights of traffic loads. Results show that the mass ratio of TMDs is the more effective parameter in reducing imposed vertical vibration in comparison with the damping ratio. Furthermore, it is found that TMD is very sensitive to its tuned frequency, i.e., with a little deviation from a suitable frequency, the expected performance of TMD significantly decreased. TMDs have a positive and considerable performance at certain vehicle speeds and this performance declines when the weight of traffic loads is increased. Besides, the results reveal that the highest impact of TMD on the reduction of the vertical vibrations is when free vibrations occur for the bridge deck. In that case, maximum reductions of 24% and 59% are reported in the vertical acceleration of the bridge deck for the forced and free vibration amplitudes, respectively. The maximum reduction of 13% is also obtained for the maximum displacement of the bridge deck. The results are mainly related to the resonance condition.