DOI QR코드

DOI QR Code

Numerical performance assessment of Tuned Mass Dampers to mitigate traffic-induced vibrations of a steel box-girder bridge

  • Bayat, Elyas (Department of Civil, Chemical and Environmental Engineering, Genoa University) ;
  • Bayat, Meysam (Department of Civil Engineering, Najafabad Branch, Islamic Azad University) ;
  • Hafezzadeh, Raheb (Department of Engineering and Architecture, Parma University)
  • Received : 2019.09.29
  • Accepted : 2021.01.29
  • Published : 2021.04.25

Abstract

In this paper, the effects of Tuned Mass dampers (TMDs) on the reduction of the vertical vibrations of a real horizontally curved steel box-girder bridge due to different traffic loads are numerically investigated. The performance of TMDs to reduce the bridge vibrations can be affected by the parameters such as dynamic characteristics of TMDs, the location of TMDs, the speed and weight of vehicles. In the first part of this study, the effects of mass ratio, damping percentage, frequency ratio, and location of TMDs on the performance of TMDs to decrease vertical vibrations of different sections of bridge deck are evaluated. In the second part, the performance of TMD is investigated for different speeds and weights of traffic loads. Results show that the mass ratio of TMDs is the more effective parameter in reducing imposed vertical vibration in comparison with the damping ratio. Furthermore, it is found that TMD is very sensitive to its tuned frequency, i.e., with a little deviation from a suitable frequency, the expected performance of TMD significantly decreased. TMDs have a positive and considerable performance at certain vehicle speeds and this performance declines when the weight of traffic loads is increased. Besides, the results reveal that the highest impact of TMD on the reduction of the vertical vibrations is when free vibrations occur for the bridge deck. In that case, maximum reductions of 24% and 59% are reported in the vertical acceleration of the bridge deck for the forced and free vibration amplitudes, respectively. The maximum reduction of 13% is also obtained for the maximum displacement of the bridge deck. The results are mainly related to the resonance condition.

Keywords

References

  1. Chen, Z., Han, Z., Fang, H. and Wei, K. (2018), "Seismic vibration control for bridges with high-piers in Sichuan-Tibet railway", Struct, Eng, Mech., 66(6), 749-759. https://doi.org/10.12989/sem.2018.66.6.749.
  2. Chen, Z., Han, Z., Zhai, W. and Yang, J. (2019), "TMD design for seismic vibration control of high-pier bridges in Sichuan-Tibet Railway and its influence on running trains", Veh. Syst. Dyn., 57(2), 207-225. https://doi.org/10.1080/00423114.2018.1457793.
  3. Den Hartog, J.P. (1985), Mechanical Vibrations, Courier Corporation, New York, NY, USA.
  4. Domaneschi, M. and Martinelli, L. (2014), "Refined optimal passive control of buffeting-induced wind loading of a suspension bridge", Wind Struct., 18(1), 1-20. https://doi.org/10.12989/was.2014.18.1.001.
  5. Domaneschi, M., Martinelli, L. and Po, E. (2015), "Control of wind buffeting vibrations in a suspension bridge by TMD: Hybridization and robustness issues", Comput. Struct., 155, 3-17. https://doi.org/10.1016/j.compstruc.2015.02.031.
  6. Elias, S. and Matsagar, V. (2017), "Research developments in vibration control of structures using passive tuned mass dampers", Ann. Rev. Control, 44, 129-156. https://doi.org/10.1016/j.arcontrol.2017.09.015.
  7. Fiore, A. and Marano, G.C. (2018), "Serviceability performance analysis of concrete box girder bridges under traffic-induced vibrations by structural health monitoring: A case study", Int. J. Civil Eng., 16(5), 553-565. https://doi.org/10.1007/s40999-017-0161-3.
  8. Ghaedi, K., Ibrahim, Z., Adeli, H. and Javanmardi, A. (2017), "Invited review: Recent developments in vibration control of building and bridge structures", J. Vibroeng., 19(5), 3564-3580. https://doi.org/10.21595/jve.2017.18900.
  9. Iranian Standards No. 139, Standard Loads for Bridges (2005), Office of the Deputy for Technical Affairs, Bureau of Technical Affairs and Standards, Tehran, Iran.
  10. Lievens, K., Lombaert, G., De Roeck, G. and Van den Broeck, P. (2016), "Robust design of a TMD for vibration serviceability of foot-bridges accounting for structural and loading uncertainties", Proceedings of ISMA2016 including USD2016, Leuven, September.
  11. Lievens, K., Lombaert, G., Van Nimmen, K., De Roeck, G. and Van den Broeck, P. (2018), "Robust vibration serviceability assessment of footbridges subjected to pedestrian excitation: strategy and applications", Eng. Struct., 171, 236-246. https://doi.org/10.1016/j.engstruct.2018.05.047.
  12. Liu, J., Qu, W., Nikitas, N. and Ji, Z. (2018), "Research on extending the fatigue life of railway steel bridges by using intelligent control", Constr. Build. Mater., 168, 532-546. https://doi.org/10.1016/j.conbuildmat.2018.02.125.
  13. Matin, A., Elias, S. and Matsagar, V. (2020), "Distributed multiple tuned mass dampers for seismic response control in bridges", Proceedings of the Institution of Civil Engineers-Structures and Buildings, London, March.
  14. Miguel, L.F., Lopez, R.H., Torii, A.J., Miguel, L.F. and Beck, A.T. (2016), "Robust design optimization of TMDs in vehicle-bridge coupled vibration problems", Eng. Struct., 126, 703-711. https://doi.org/10.1016/j.engstruct.2016.08.033.
  15. Mokrani, B., Tian, Z., Alaluf, D., Meng, F. and Preumont, A. (2017), "Passive damping of suspension bridges using multi-degree of freedom tuned mass dampers", Eng. Struct., 153, 749-756. https://doi.org/10.1016/j.engstruct.2017.10.028.
  16. Nguyen, T., Miura, N. and Sone, A. (2016), "An optimization method of multiple tuned mass damper systems and application to bridge with moving car", Proceedings of the ASME 2016 Pressure Vessels and Piping Conference, British Columbia, July.
  17. Pipinato, A. (2019), "Extending the fatigue life of steel truss bridges with tuned mass damper systems", Adv. Civil Eng., 2019, Article ID 5409013. https://doi.org/10.1155/2019/5409013.
  18. Qin, S., Zhou, Y.L. and Kang, J. (2019), "Footbridge serviceability analysis: from system identification to tuned mass damper implementation", KSCE J. Civil Eng., 23(2), 754-762. https://doi.org/10.1007/s12205-018-0985-7.
  19. Saaed, T.E., Nikolakopoulos, G., Jonasson, J.E. and Hedlund, H. (2015), "A state-of-the-art review of structural control systems", J. Vib. Control, 21(5), 919-937. https://doi.org/10.1177/1077546313478294.
  20. Spencer Jr., B.F. and Nagarajaiah, S. (2003), "State of the art of structural control", J. Struct. Eng., 129(7), 845856. https://doi.org/10.1061/(ASCE)07339445(2003)129:7(845).
  21. Tubino, F. and Piccardo, G. (2015), "Tuned mass damper optimization for the mitigation of human-induced vibrations of pedestrian bridges", Meccanica, 50(3), 809-824. https://doi.org/10.1007/s11012-014-0021-z.
  22. Tubino, F. and Piccardo, G. (2016), "Serviceability assessment of footbridges in unrestricted pedestrian traffic conditions", Struct. Infrastr. Eng., 12(12), 1650-1660. https://doi.org/10.1080/15732479.2016.1157610.
  23. Wang, D., Wu, C., Zhang, Y. and Li, S. (2019), "Study on vertical vibration control of long-span steel footbridge with tuned mass dampers under pedestrian excitation", J. Constr. Steel Res., 154, 84-98. https://doi.org/10.1016/j.jcsr.2018.11.021.
  24. Yang, Y.B., Wang, Z.L., Shi, K., Xu, H. and Wu, Y.T. (2020), "State-of-the-art of the vehicle-based methods for detecting the various properties of highway bridges and railway tracks", Int. J. Struct. Stab. Dyn., 20(13), 2041004. https://doi.org/10.1142/S0219455420410047.
  25. Yin, X., Liu, Y., Song, G. and Mo, Y.L. (2018), "Suppression of bridge vibration induced by moving vehicles using pounding tuned mass dampers", J. Bridge Eng., 23(7), 04018047. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001256.
  26. Yin, X., Song, G. and Liu, Y. (2019), "Vibration suppression of wind/traffic/bridge coupled system using multiple pounding tuned mass dampers (MPTMD)", Sensor., 19(5), 1133. https://doi.org/10.3390/s19051133.