• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.57-70
• /
• 2009

According to the change of the traffic conditions, the requirement of controlling the separated left(or right) turn, the median bus lane and bicycle signal is increasing. However, the traffic signal controller standard based on the four-set lights restricts to control the three-set lights which control the separated direction and kind of traffics. This study suggests the method to control the three-set lights signal by improving the hardware and software for the traffic signal controller which is operated currently in the traffic scene. The 6 output ports of Load Signal Unit(LSU) which is consisted of Pedestrian Red, Pedestrian Green, Red, Yellow, Arrow and Green signal reconstitute 2 rows of the Red, Yellow, Green for three-set lights while the Signal Map data's code values which control the signal step of an individual Ring and LSU are established to adjust the LSU's output ports(R1 Y1 G1 R2 Y2 G2) of the three-set lights. The effect of using the separated through/left turn and the median lane bus signal of three-set lights is analyzed from a Mangwoo intersection in Seoul. The results of analysis show that the delay time of the east-west direction where the median bus lane is operated is especially improved with over 70 sec/veh.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.29-38
• /
• 2007

The Korea National Police Agency launched a campaign to encourage drivers in stop line observance and to discourage stop line violation by intensively imposing fines. It was to increase stop line observance of drivers and thus traffic safety. According to statistics, the stop line observance rate was increased over 80 % of drivers during the campaign but regressed to the past after the campaign. This paper delivers the effect of the location of traffic signal lights on driver's stop line observance and develops a guideline to improve highway traffic environment in long terms. Statistical tests conducted based on field data showed that the drivers' stop line observance increases when traffic signal lights are closely installed from a stop line. It was proposed from the study that traffic signal lights be installed $10{\sim}20m$ from a stop line.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.62-69
• /
• 2017

Accurate detection of traffic lights is very important for the advanced driver assistance system (ADAS). There have been many research developments in this area. However, conventional of image processing methods are usually sensitive to varying illumination conditions. This paper proposes a traffic light detection algorithm to overcome this situation. The proposed algorithm first detects the candidates of traffic light using the proposed color map and hue-saturation-value (HSV) Traffic lights are then detected using the conventional histogram of oriented gradients (HOG) descriptor and support vector machine (SVM). Finally, the proposed Multilayer HOG descriptor is used to determine the direction information indicated by traffic lights. The proposed algorithm shows a high detection rate in real-time.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.3
• /
• pp.407-417
• /
• 2010

In Basel II compliance, internal rating systems are allowed for banks to enhance the self control and the validation of the system are getting more important. The validation methods are composed of qualitative test and quantitative test, three basic standards of which are discriminatory power, stability and calibration. The aim of this article is to review the quantitative tests for calibration and find a new method for it. These methods for discrimination between forecasted PD and observed PD include binomial test, chi square test, Brier score, traffic lights approach, normal test and extended traffic lights approach. We introduce a modified extended traffic lights approach considering asset correlations.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3037-3047
• /
• 2000

This paper describes a method of tracking a close leading vehicle by color image processing using the pairs of tail and brake lights. which emit red light and are housed on the rear of the vehicle in stop-and-go traffic condition. In the color image converted as an HSV color model. candidate regions of rear lights are identified using the color features of a pair of lights. Then. the pair of tailor brake lights are detected by means of the geometrical features and location features for the pattern of the tail and brake lights. The location of the leading vehicle can be estimated by the location of the detected lights and the vehicle can be tracked continuously. It is also possible to detect the braking status of the leading vehicle by measuring the change in HSV color components of the pair of lights detected. In the experiment. this method tracked a leading vehicle successfully from urban road images and was more useful at night than in the daylight. The KAV-Ill (Korea Autonomous Vehicle- Ill) equipped with a color vision system implementing this algorithm was able to follow a leading vehicle autonomously at speeds of up to 15km!h on a paved road at night. This method might be useful for developing an LSA (Low Speed Automation) system that can relieve driver's stress in the stop-and-go traffic conditions encountered on urban roads.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.49-58
• /
• 2010

The traffic signal controllers being used in the domestic currently are being manufactured based on the korean national police standard which was developed for controlling the quad-light traffic signal having the red, yellow, left-turn arrow, and green lights. But according to the national policy for the traffic operation, they have to be changed to be able to switch the tri-light signal having red, yellow and green lights. In this study, a new tri-light traffic signal controller was designed and developed by the way improving the Signal Control Unit of the existing quad-light standard traffic controller. The Load Signal Unit(LSU) was improved to output 6 signals which are the two assemblies of three signal indications having the red, yellow, and green lights. To enough traffic signals output to control each directional movements and the various transport modes which are car, bus, bike, and pedestrian etc., the connector bus system was designed to be able to accommodate maximum 96 signals outputs being constructed by 16 LSUs. Flasher device was developed to be able to support maximum 32 red signals. In the software, the communication protocol between traffic control center and the traffic signal controller was improved and new signal map code values were defined for the developed LSU controlling the quad-light traffic signal. A model of the quad-light traffic signal controller developed and was tested three operations, protocol-operation, remote-command and control-mode. The test result operated all of them successfully.

• 전기의세계
• /
• v.20 no.4
• /
• pp.12-16
• /
• 1971

The electrical detector and computer systems for traffic flow and speed measurement are demonstrated in this paper. For the best traffic control optimization, linear and non-linear equations in the transition state are dealing with the perturbation of the linear car-following. In the conclusions, we construct a realizable system for the central automatic traffic control with a computer. Furthermore, fixed periodic switching system by manual with the automatic traffic control system is recommended for emergency perturbation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.123-132
• /
• 2017

Traffic lights contain very important information for safety driving. So, the delivery of the information to drivers in real-time is a very critical issue for advanced driver assistance systems. However, traffic light detection is quite difficult because of the small sized traffic lights and the occlusion in real world. In this paper, a traffic light detection method using modified color based saliency map and morphological information is proposed. It shows 98.14% of precisions and 83.52% of recalls on computer simulations.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1650-1655
• /
• 2007

A lights-out detector, which helps the person in charge of maintenance make a quick judgment in the event of a failure of LED-type traffic lights, was explored/developed and installed/ tested, at Seoul Metro, after they developed a patented pilot product in 2005; and, a product improvement test was conducted to ensure reasonable maintenance of signaling facilities. Having better compatibility with existing circuit in use and displaying stable load current, the device makes the maintenance of lights-out detection and alert easier.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.448-452
• /
• 2010

The traditional Aids to Navigations(AtoN) have been ensuring the safety of ships by indicating the passage and dangers by depending on the flashing lights. But the more the industrial complex behind port which is all over the country involving the Ulsan port developed, the more the lights behind port is stronger, and then the distinguishment of the signal of AtoN from the lights behind port is more difficult. And It is urgently needed to prepare the counterplan about the ensurement of safety because the authorities levels up the limit tonnage of the ships which are sail in and out during night to improve the operation of port through reducing of the traffic jam So, the method of direct lighting like LED non-neon is applied to unmanned lighthouses or light beacon, and the LED flashing number plate is applied to light buoys whose light power is weaker than to improve distinguishment and to be easy positioning of ships. As a result, the users of Ulsan port comment favorably on this item and the development of AtoN must be continuos to overcome the lights behind port.