• 한국전자통신학회논문지
• /
• 제16권5호
• /
• pp.867-878
• /
• 2021

최근 도로조명시설에 영상 및 레이더 등을 부착하여, 실시간 교통데이터 수집과 교통 정보제공이 가능한 스마트 가로등에 대한 연구가 활발하다. 스마트 가로등 기술은 이에 따라 기존 대비 고해상도 검지, 판별, 조밀한 정보제공이 가능하다. 스마트 가로등의 장점으로 고해상도 정보전달매체로서 효과적으로 활용하기 위해서는 기존 중앙집중식 운영 전략과 다른 지점형 운영 전략이 요구된다. 본 연구는 스마트 가로등 기반사고 발생 전/후의 상황에 따라 구분된 공간적 범위에서 목적성을 달리하는 동적 정보 제공 전략, 해제 전략 및 그 기준에 대해서 제시하였다. 이를 통해 스마트 도로조명시설을 보다 효과적으로 활용 가능할 것으로 기대된다.

• 한국측량학회지
• /
• 제39권5호
• /
• pp.253-263
• /
• 2021

Traffic data collected using advanced equipment are highly valuable for traffic planning and efficient road operation. However, there is a problem regarding the reliability of the analysis results due to equipment defects, errors in the data aggregation process, and missing data. Unlike other detectors installed for each vehicle lane, radar detectors can yield different error types because they detect all traffic volume in multilane two-way roads via a single installation external to the roadway. For the traffic data of a radar detector to be representative of reliable data, the error factors of the radar detector must be analyzed. This study presents a field survey of variables that may cause errors in traffic volume collection by targeting the points where radar detectors are installed. Video traffic data are used to determine the errors in traffic measured by a radar detector. This study establishes three types of radar detector traffic errors, i.e., artificial, mechanical, and complex errors. Among these types, it is difficult to determine the cause of the errors due to several complex factors. To solve this problem, this study developed a radar detector traffic volume error analysis model using a multiple linear regression model. The results indicate that the characteristics of the detector, road facilities, geometry, and other traffic environment factors affect errors in traffic volume detection.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.67-75
• /
• 2012

Because recently(July 14, 2011) fire occurred in the engine room of a moving taxi under Namsan Tunnel 1, 51 vehicles' driver and more than 250 passengers in the road tunnel were urgently evacuated with abandoned vehicles. Vehicle fires in Namsan Tunnel that day, Sufferers struggled to escape quickly difficult to escape the two-way by abandoned vehicles on the road and to fear many casualties by using vehicle fuel and combustible interior and the driver who is ignorant of vehicle accident continuous entered in the road tunnel had accessibility the site of fire department was more difficult. In this study, It is to investigate structure and basic materials, such as fire extinguish equipment and facilities for damage prevention and to analyze the problems and to plan improvement method of fire extinguish equipment, facilities for damage prevention and transportation facilities(Large traffic signs, Breaker, etc.) on the Namsan Tunnel that in the long-term plan is prepared to strengthen for accessibility of the site of fire department in case of Vehicle's fire.

• 국제초고층학회논문집
• /
• 제2권4호
• /
• pp.331-340
• /
• 2013

The main topic of this paper is to show a possibility of indoor air quality enhancement and the fan energy savings in underground parking facilities by applying the demand-controlled ventilation (DCV) strategy based on the real-time variation of the traffic load. The established ventilation rate is estimated by considering the passing distance, CO emission rate, idling time of a vehicle, and the floor area of the parking facility. However, they are hard to be integrated into the real-time DCV control. As a solution to this problem, the minimum ventilation rate per a single vehicle is derived in this research based on the actual ventilation data acquired from several existing underground parking facilities. And then its applicability to the DCV based on the real-time variation of the traffic load is verified by simulating the real-time carbon monoxide concentration variation. The energy saving potentials of the proposed DCV strategy is also checked by comparing it with those for the current underground parking facility ventilation systems found in the open literature.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.38-43
• /
• 2008

한 국가의 SOC 시설 보유량은 공공서비스의 공급능력을 보여주는 지표로 활용되고 있으며, 국가경쟁력의 원천이 되고 있다. 한국은 SOC 시설이 충분하다는 판단하에 '03년 이후 SOC 투자를 점차 축소하고 있다. 하지만 SOC 투자 축소는 기존 SOC 공사의 공기지연이 발생하고 있으며, 향후에는 국가경쟁력을 저해할 가능성을 갖고 있다. 따라서 충분한 수준의 SOC 투자는 지속되어야 한다. 이를 위해 우선 교통시설특별회계를 최소한 국가기간교통망계획의 계획기간인 '19년까지 연장할 필요가 있다. 또한 민간투자사업을 효과적으로 활용하고, SOC 투자를 완공위주의 집중투자를 해야 한다.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.143-154
• /
• 2013

PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• 한국항만학회지
• /
• 제9권2호
• /
• pp.39-49
• /
• 1995

Recently, the traffic volume has been greatly increased partly because of high growth rate of domestic and world economy, and partly because of increased transhipment demand resulting from the destruction of Kobe port by earthqwake early this year. So, container facilities in Pusan Port are under serious congestion. The congestion costs in connection with container traffic in Pusan Port is estimated to be 29.3 billion won in 1994. In 1995 the situation is still worsening. PECT has continued to grow annually by 35% in cargo handling exceeding more than 31% of the total container volumes handled in Korea. The BOR of container berths in PECT in 1994 is 75% reflecting extreme congestion in container traffic. The reason for such serious congestion in PECT is the shortage of container handling facilities in comparison with ever-increasing cargo traffic. In order to solve the provisional problem, the shortage of handling capacity, a model developed to optimize the operation of PECT is described and demonstrated. The model minimizes total port costs, including the costs of dock labour, facilities and equipment, ship, containers, and cargo. The object of this study is, through the model results, mainly to determine the optimal combination of berths and cranes under various circumstances and to show that total costs per ship or unit of cargo served can be reduced by increasing the number of cranes per berth and berth utilization above present levels. Eventually, the results obtained with this model in PECT suggest that increase to 3 in the number of cranes per existing berth could reduce the need for major investments in berths and even reduce operating costs.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1999년도 제36회 학술발표회논문집
• /
• pp.129-134
• /
• 1999

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.327-330
• /
• 2007

This article discusses a capacity planning method in QoS-guaranteed IP networks such as BcN (Broadband convergence Network). Since IP based networks have been developed to transport best-effort data traffic, the introduction of multi-service component in BcN requires fundamental modifications in capacity planning and network dimensioning. In this article, we present the key issues of the capacity planning in multi-service IP networks. To provide a foundation for network dimensioning procedure, we describe a systematic approach for classification and modeling of BcN traffic based on the QoS requirements of BcN services. We propose a capacity planning framework considering data traffic and real-time streaming traffic separately. The multi-service Erlang model, an extension of the conventional Erlang B loss model, is introduced to determine required link capacity for the call based real-time streaming traffic. The application of multi-service Erlang model can provide significant improvement in network planning due to sharing of network bandwidth among the different services.

• ETRI Journal
• /
• 제28권6호
• /
• pp.777-786
• /
• 2006

Since the introduction of competition in the telecommunication market due to the growth of the interconnection between heterogeneous networks, particularly fixed and mobile networks, the interconnection charge based on traffic-sensitive (TS) and non-traffic-sensitive (NTS) costs has become more important. Although there have been many studies of the public switched telephone network (PSTN), previous studies of TS and NTS costs in mobile networks are very few. In this paper, as a pilot study, we propose three criteria and a procedure for the classification of TS and NTS costs based on mobile systems. The three criteria are the following: function type, investment requirement, and main exhaust driver. Moreover, for a CDMA mobile system, strongly TS, strongly NTS, and mixed components are classified by the proposed criteria and procedure. The proposed criteria, procedure, and classification can provide a systematic and useful guideline to decide the scope of mobile facilities and to determine the terminating cost on mobile networks from fixed networks.