• Title/Summary/Keyword: Traffic Measurement System

Search Result 257, Processing Time 0.022 seconds

A Study on System for Traffic Measurement of MQTT Broker (MQTT Broker의 트래픽 측정을 위한 시스템에 관한 연구)

  • Kim, Sung-Jin;Oh, Chang-Heon
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2017.05a
    • /
    • pp.637-638
    • /
    • 2017
  • The MQTT broker has problems such as packet loss and delay due to degraded network performance according to traffic. However, the MQTT broker does not support a separate interface for traffic measurement, so it can not cope with network degradation. In this paper, we propose a system for traffic measurement of MQTT broker. The proposed system uses the jnetpcap library to measure all traffic to and from the MQTT broker.

  • PDF

A Measurement of Traffic Vehicles Flow by Spatial Filtering Method (교통류 계측 II)

  • 전승환
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 1996.09a
    • /
    • pp.31-36
    • /
    • 1996
  • It is important to measure the vehicle flow in controlling the traffic system. This report deals with a traffic flow measurement system using the differential spatial filters. This system can measure the velocity the length and height profile of the vehicle. The detector is located above the traffic lane. This provides the system with the following advantages : one is that each lane can be monitored without an influence of the other lanes the other is that the system construction is simple and can be set easily.

  • PDF

A Study on the Selection of Measurement Point for Automatic Environmental Noise Measurement System (환경소음자동측정망의 측정지점 선정에 관한 연구)

  • Lim, J.S.;Lee, B.C.;Jeong, D.J.;Lee, M.H.;Yang, K.H.;Oh, Y.S.
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.442-445
    • /
    • 2007
  • A noise reduction policy can be more effectively made when automatic environmental noise measurement system is set up. However, the local characteristic of noise pollution requires a lot of measurement points. This study considers that automatic environmental noise measurement system connects with automatic air pollution measurement system and noise map. The measurement points of traffic volume by the National Police Agency and the Ministry of Construction and Transportation are investigated to use at drawing the road traffic noise map. Finally, the effective application method of the environmental noise measurement vehicle is discussed.

  • PDF

A Measurement of Traffic Vehicles Flow by the Ultrasonic Spatial Filtering Method (교통난 계측 I-초음파용 공간필터법에 의하여-)

  • 전승환
    • Journal of the Korean Institute of Navigation
    • /
    • v.20 no.2
    • /
    • pp.51-58
    • /
    • 1996
  • For the smooth flow of traffic vehicles and its effective management, it is necessary to have an exact information on traffic condition, i.e., the volume of traffic, velocity, occupancy and classification of vehicles. In particular, for classification of vehicles, there has been only image processing method using camera, where the method can obtain much information but rather expensive. In this paper, an algorithm for the measurement of velocity and total length of vehicles has been proposed to develop a general traffic management system, which is necessary to discriminate the class of vehicles. In order to realize the proposed algorithm, we have developed an ultrasonic spatial filtering method, which has better performance than that of using the traditional vehicle detector. To have this system to be constructed, we have introduced three sets of ultrasonic devices where each has one transmitter and two receivers which are arranged to obtain the spatial difference of objects. The velocity of vehicles can be measured by analyzing the occurrence time of pulses and their time differences. The total length of vehicles can be given by multiplying velocity with time interval of pulses sequence. To confirm the effectiveness of this measuring system, the experiment by the spatial filtering method using the ultrasonic sensors has been carried out. As the results, it is found that the proposed method can be used as one of measurement tools in the general traffic management system.

  • PDF

The Development of Camera Detection System for the Measurement Road Traffic Data (영상검지 카메라를 이용한 도로상의 차량흐름 계측방안 연구)

  • Kim, Hie-Sik;Kim, Jin-Man
    • Journal of the Korean Society of Safety
    • /
    • v.18 no.4
    • /
    • pp.23-27
    • /
    • 2003
  • To improve the road transportation safety, the road traffic data is monitored by applying an image detection system. The road traffic safety is analysed using image processing techniques. For more accurate measurement, the coordinate matching of real road data to image is one of the most essential parts of the image detection technique. The road image is skewed at the input screen, because the video camera is installed at the roadside. A fast and precise algorithm for the coordinate matching is developed to convert image coordinates into road coordinates.

Automatic Optimum Control of the Traffic Signal Lights (교통신호의 자동최적제어에 관한 연구)

  • 양흥석;김호윤
    • 전기의세계
    • /
    • v.20 no.4
    • /
    • pp.12-16
    • /
    • 1971
  • The electrical detector and computer systems for traffic flow and speed measurement are demonstrated in this paper. For the best traffic control optimization, linear and non-linear equations in the transition state are dealing with the perturbation of the linear car-following. In the conclusions, we construct a realizable system for the central automatic traffic control with a computer. Furthermore, fixed periodic switching system by manual with the automatic traffic control system is recommended for emergency perturbation.

  • PDF

Quality Measurement of Data Processing by a Protocol Change of Power SCADA System (전력감시제어설비의 프로토콜 변경에 따른 데이터처리 품질측정)

  • Lee Yong-Doo;Choi Seong-Man;Yoo Cheol-Jung;Chang Ok-Bae
    • The KIPS Transactions:PartD
    • /
    • v.12D no.7 s.103
    • /
    • pp.1031-1038
    • /
    • 2005
  • In this paper, the maximum traffic quantity and actual traffic quantify of the data which are needed to grasp the statement of a system will be measured more accurately. A concrete quality measurement will be conducted by analysing a change of traffic quantity according to a protocol change and traffic under an overload condition when there is an accident. As a result can make an opportunity to maximize safety of power SCADA. Furthermore, future traffic quantity can be prospected by knowing current traffic quantity and grasping the rate of increase by the analysis and the information can be used as data to secure the band width in advance. It can make stable operation of power SCADA by arranging the limited network resources efficiently by information analysis of a network and expects more confidence.

Network Traffic Measurement Analysis using Machine Learning

  • Hae-Duck Joshua Jeong
    • Korean Journal of Artificial Intelligence
    • /
    • v.11 no.2
    • /
    • pp.19-27
    • /
    • 2023
  • In recent times, an exponential increase in Internet traffic has been observed as a result of advancing development of the Internet of Things, mobile networks with sensors, and communication functions within various devices. Further, the COVID-19 pandemic has inevitably led to an explosion of social network traffic. Within this context, considerable attention has been drawn to research on network traffic analysis based on machine learning. In this paper, we design and develop a new machine learning framework for network traffic analysis whereby normal and abnormal traffic is distinguished from one another. To achieve this, we combine together well-known machine learning algorithms and network traffic analysis techniques. Using one of the most widely used datasets KDD CUP'99 in the Weka and Apache Spark environments, we compare and investigate results obtained from time series type analysis of various aspects including malicious codes, feature extraction, data formalization, network traffic measurement tool implementation. Experimental analysis showed that while both the logistic regression and the support vector machine algorithm were excellent for performance evaluation, among these, the logistic regression algorithm performs better. The quantitative analysis results of our proposed machine learning framework show that this approach is reliable and practical, and the performance of the proposed system and another paper is compared and analyzed. In addition, we determined that the framework developed in the Apache Spark environment exhibits a much faster processing speed in the Spark environment than in Weka as there are more datasets used to create and classify machine learning models.

Advanced QoS Provisioning Scheme using CDMA Traffic Measurement in All-IP Networks (All-IP 네트워크에서 CDMA트래픽 측정기술을 이용한 고급 QoS 제공 기법에 관한 연구)

  • Kim Seok-Hoon;Ryoo In-Tae
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.1B
    • /
    • pp.125-132
    • /
    • 2004
  • In this paper, we propose an advanced QoS provisioning scheme (AQPS) that can provide satisfied QoS for multimedia applicatios based on accurate traffic measurements. We first consider the 1xEV-DV system as a target system, extract QoS requirements or the system, and then develop a corresponding QoS provisioning method using CDMA traffic measurement. The AQPS has been verified to outperform the existing system used in the current 1xEV-DV network and to efficiently manage network resources by computer simulations.

An Implementation of Traffic Management System for Internet QoS Guarantee (인터넷 품질 수준 측정을 위한 품질 관리시스템 구현)

  • 김진규;이순흠
    • Journal of Korea Multimedia Society
    • /
    • v.7 no.3
    • /
    • pp.399-407
    • /
    • 2004
  • As the number of IP-users are increasing, it is getting so important for service providers to check the state of the current Internet and their service quality by measuring the traffic quality. We describe a general concept of measurement architecture and internet QoS (Quality of Service) parameters, and we review measurement tools. To meet these requirements, we design and implement the Internet traffic management system.

  • PDF