• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.1053-1057
• /
• 2005

현재 IETF (Internet Engineering Task Force)의 SHIM6 (Site Multihoming by IPv6 Intermediation) 워킹그룹에서는 Network layer Shim (L3shim)이라는 새로운 IPv6 스택을 정의하여IPv6 환경에서 멀티호밍을 지원하는 방법에 대해 표준을 제정하고 있다. 이 Multihoming은 redundancy, load sharing과 같은 멀티호밍 장점을 지원할 수 있다. 본 논문은 이와 같이 새롭게 정의된 L3shim이 단말에 있을 경우, 단말에서 효과적인 Policy 정책을 통한 load sharing 및 balancing 통한 traffic engineering 방법을 제시한다. 현재 SHIM6 워킹그룹에서는 L3shim을 이용한 load balancing 부분은 다루고 있지 않다. 그러나 멀티호밍의 장점 줌 하나는load balancing이며 실제 load balancing이 지원 됐을 경우 응용 차원에서 많은 장점을 가질 것으로 여겨진다. 따라서 이와 관련한 메커니즘이 필요하며, 이를 위한 선행적인 연구가 필요로 되어진다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.121-127
• /
• 2002

In this paper, we propose traffic management support and evaluate the performance through simulation. We suggest traffic management routing protocol that can guarantee reliance according to not only reduction of the Network traffic congestion but also distribution of the network load that prevents data transmission. For performance evaluation, we analyzed the average data reception rate and network load, considering the node mobility. We found that in the mobile Ad Hoc networks, the traffic management service increased the average data reception rate and reduced the network traffic congestion and network load in Mobile Ad Hoc Networks.

• Journal of Information Processing Systems
• /
• 제9권3호
• /
• pp.365-378
• /
• 2013

In Wireless Mesh Networks (WMNs), we usually deploy multiple Internet Gateways (IGWs) to improve the capacity of WMNs. As most of the traffic is oriented towards the Internet and may not be distributed evenly among different IGWs, some IGWs may suffer from bottleneck problem. To solve the IGW bottleneck problem, we propose an efficient scheme to balance the load among different IGWs within a WMN. Our proposed load-balancing scheme consists of two parts: a traffic load calculation module and a traffic load migration algorithm. The IGW can judge whether the congestion has occurred or will occur by using a linear smoothing forecasting method. When the IGW detects that the congestion has occurred or will occur, it will firstly select another available IGW that has the lightest traffic load as the secondary IGW and then inform some mesh routers (MPs) which have been selected by using the Knapsack Algorithm to change to the secondary IGW. The MPs can return to their primary IGW by using a regression algorithm. Our Qualnet 5.0 experiment results show that our proposed scheme gives up to 18% end-to-end delay improvement compared with the existing schemes.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권2호
• /
• pp.103-111
• /
• 2000

The objectives of the study are to know the strain distribution and modal dynamic behaviour of steel bridge girders by actual traffic load. The live load effect depends on many parameters including the span length, gross vehicle weight, axle weight, axle configuration so on. For the estimation of static and dynamic characteristic, strain data caused by moving loads and traffic characteristics of passing vehicle under actual traffic load have measured using Bridge Weigh in Motion. To confirm the reliability of BWIM system, strain data measured using the $120{\Omega}$ strain gauge under the same condition. It is considered that the data acquired from BWIM system have reliability through the analysis and comparison between stress measured by strain data from BWIM and computed by FEM. Additionally according to the measured strain data of up-line and down-line on the highway, the up-line bridge grows more faster than the down-line bridge and girder 4 and 5 carry more load when vehicles pass the inner line and girder 2 and 3 does when vehicles pass the outer line as this case(the bridge composed with 5 girders).

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.821-829
• /
• 2006

교통하중은 포장 설계 및 해석에서 가장 중요한 입력 변수로서 포장 파손의 주요 원인이 된다. 따라서 정확한 포장 설계 및 해석을 위해서는 적절한 교통하중 정량화가 선행되어야 한다. 전통적으로 교통하중은 혼합된 교통흐름을 설계목적의 하나의 값으로 변환시켜주는 ESALs 관점에서 추정되어왔으나 이는 AASHO 도로 테스트를 통해 도출된 지극히 경험적인 값으로 전 노선망에 대해 평균적인 계수로 적용하기에는 한계가 있다. 이러한 등가단축하중계수의 문제점을 해결하기 위해 선진국에서는 역학적 개념을 도입한 많은 연구를 진행한 결과 역학적-경험적 설계법(Mechanistic-Empirical Design)에 적용할 수 있는 축하중 분포(Axle Load Spectra)를 이용한 교통하중 정량화 방안을 수립하였다. 본 논문에서는 일반국도에 설치 운영되고 있는 WIM 시스템을 통해 수집된 화물차 하중 데이터를 이용하여 축하중 분포 특성(Axle Load Spectra)을 이해하고 혼합정규분포함수에 기초한 축 형태별 하중 분포 모형식을 제시하였으며, 이를 기존 하중 분포 모형과 비교 평가하였다. 본 논문에서 제시한 화물차 축하중 분포 특성 및 축하중 분포 모형식은 향후 일반국도 및 고속도로의 포장 설계법 개발을 위한 교통하중 정량화 방안 수립 시, 과적 차량 단속 정책 수립 시, 도로 유지관리를 위한 계획 수립 시 기초자료로써 활용가능하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.365-370
• /
• 1999

In this paper, dynamic response analysis on the ground movement applied traffic load by 2D finite element procedure has been studied. In particular, The paper deal with pointing acceleration method that applied AFIMEX Code as like 2D-FLUSH using equivalent linear method. As the result, it is found that dynamic response analysis by pointing acceleration method expressed ground movement by traffic load exactly.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.233-236
• /
• 2010

This paper describes the packet traffic management of the Ubiquitous Healthcare System. In this system, ECG signal and accelerometer signal is transmitted from a wearable health shirt (WHS) to the base station. However, with the increment of users in this system, traffic over-load issue occurs. The main aim of this paper is to reduce the traffic over-load issue between sensor nodes by only transmitting the required signals to the base station when irregular activities are observed. In order to achieve this, in-network processing is adapted where the process of observation is conducted inside the sensor node of WHS. Results shows that irregular activities such as fall can be detected on real-time inside the sensor node and thus resolves traffic over-load issue.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권2호
• /
• pp.111-123
• /
• 2006

교량의 설계에 있어서 정확한 하중의 산정은 교량의 안전성 확보에 가장 핵심적인 사항이며 향후 유지관리 측면에서도 매우 중요하다. 교량구조물에서 차량에 의한 하중효과는 주로 활하중(충격하중 포함) 및 피로하중으로 나타난다. 이들 하중의 정형화를 위해서는 실제 교량상을 주행하는 중차량의 중량 및 통행특성을 정확히 파악하는 것이 중요하다. 이를 위해서 주행중인 차량을 정지시키지 않고 중량을 계측할 수 있는 시스템(Bridge Weigh-In-Motion, BWIM)의 개발이 필요하다. 본 연구에서는 다양한 기능을 갖는 BWIM시스템을 국내실정에 맞게 개발하고 이를 고속도로상의 교량에서 검증하였다.

• 디지털산업정보학회논문지
• /
• 제6권2호
• /
• pp.153-167
• /
• 2010

Traffic conditions, in particular number of active TCP flows, change dramatically over time. The main goal of this paper is an adaptive queue management algorithm that can maintain network state of high-throughput and low-delay under changing traffic conditions In this paper, we devise Probability Adaptive RED(PARED) that combines the more effective elements of recent algorithms with a RED core. It automatically adjusts its adaptive marking function to account for changes in traffic load and to keep queue length within the desired target queue length. We simulate that PARED algorithm results in under changes in traffic load and mixed traffic load. The simulation test confirm this stability, and indicate that overall performances of PARED are substantially better than the RED and ARED algorithms.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.339-342
• /
• 2005

This paper presents the development of a method for determining the response modification factor, using traffic load. The proposed method is based on the results of computer simulations of traffic action effects. The simulation program generates random traffic actions for defined traffic conditions and determines the frequency distribution of maximum traffic action effects. Therefore, this study is adopted to long-span bridge for the verification of the proposed method. A comparison between the proposed method and present method shows good agreement in estimating the modified load carrying capacity of bridges.