• 한국대기환경학회지
• /
• 제3권1호
• /
• pp.55-64
• /
• 1987

Actual driving pattern of each motor vehicle type was measured and analyzed in Seoul area and vehicle emission rate was measured and traffic data were used to estimate vehicular emission factor and motor vehicle-related air pollutant emission. The analysis of contribution ratio of each vehicle type showed that LPG taxi's took 38.1% of total vehicular CO, gasoline passenger cars 37.5%, therefore, these cars are major sources of CO, gasoline passenger cars took 45.4% of total vehicular HC, motorcycles 25.3%, LPG taxi's 16.2%, so motorcycles can be said to play an important role in HC emission. For NOx, buses and trucks were thought to be major sources as buses took 36.8% and truck 26.4%. Diesel vehicles, on the other hand, took most $SO_2$ and particulate matter emission. Total emission from motor vehicles in Seoul was estimated to be 547 t/day of CO, 68t/day of HC, 163t/day of NOx, 18t/day of $SO_2$ and 19t/day of paticulate matter.

• 대한교통학회지
• /
• 제29권5호
• /
• pp.107-120
• /
• 2011

대기오염물질과 온실가스가 주는 폐해는 점차 심각한 수준으로 발전하고 있는 상황에서 자동차에 의한 배출가스가 대표적인 배출원의 하나로 손꼽히고 있다. 교통부문에 있어서는 교통운영전략 등에 의해 배출가스량을 억제 및 관리할 수 있는 방법론에 대한 연구가 필요한 상황이나 아직까지 차량의 운행행태 즉 가속, 감속, 정지 시 등에 따른 배출량을 산정할 수 있는 모형에 대한 연구는 미미한 수준이다. 본 연구에서는 신호교차로와 같은 도로를 주행하는 차량이 가속, 감속 정지 하면서 배출하는 배출가스량을 산정할 수 있는 모형을 구축하였으며 이를 위하여 차량 실험을 기반으로 배출량표를 작성하고 차량의 움직임을 운동학적 접근법으로 분석하여 모형을 구축하였다. 최종적으로는 미시적 시뮬레이터와 배출표를 이용하여 가장 현실적인 배출량 산정체계를 구축하여 모형을 검증, 평가하였다. 평가 결과 기존의 평균주행속도를 이용한 배출모형 보다 상대적으로 정확한 배출량을 산정하는 것으로 분석되었다.

• 소음진동
• /
• 제6권6호
• /
• pp.843-849
• /
• 1996

Locations and emission characteristics of noise source of motor vehicles are great important factors to control the road traffic noise in effective ways. From results of this study on emission characteristics of engine and exhaust noise, we could find that every noise emission of different kind of vehicles has smilar pattern. The main emission locations of engine noise for the front of vehicle became the space between the road surface and bottom of the body and radiator grill, and for the side of vehicle became the space between the road surface and bottom nearby the front wheel. In case of exhaust noise of passenger-car and light truck, all the highest sound intensity level located near surface of road. But it is hard to conclude the height of noise source of driving vehicles with only results of this study. So further studies are needed to check the emission characteristics of noise.

• 한국환경과학회지
• /
• 제12권1호
• /
• pp.23-34
• /
• 2003

Urban air quality is usually worse than that of rural counterpart. The contrasting atmospheric properties seem to be direct result of different urban-rural air pollutant emission. Hence, the emission estimation of air pollutants plays an important role to the atmospheric environmental management. The main purpose of this study is to find out the temporal and spatial distribution of air pollutant emission in Daegu area. For the study, the Daegu statistical yearbook and data of waste facilities and the report on traffic survey issued by Daegu metropolitan city and the statistical yearbook on the road capacity issued by the ministry of construction and transportation are used. Each item for the emission estimation is $SO_2$, CO, HC, $NO_x$, PM-10 from point, line and area source. The result were as follow; (1) The air pollutants with the highest amount of emission from the emission source is CO followed by $NO_x$, $SO_2$, PM-10, HC in descending order of magnitude. (2) The annually totaled air pollutant emission consists of 81%(73,185 ton/year) of line, 11%(9,589% ton/year) of area and 8%(7,445 ton/year) of point source in Daegu. Air polluant emission was mainly due to line sources. (3) High-emission of the air pollutants of line source appeared ariond Bukgu, Dalseonggun, Dongu and Seogu ; the areas with highway networks.

• 대한교통학회지
• /
• 제29권5호
• /
• pp.55-65
• /
• 2011

본 연구는 교통부문의 지속가능성 평가를 위한 온실가스 배출량 산정 방법론 별 비교분석을 목적으로 하였다. 배출량 산정 방법론은 UN IPCC에서 제시하였으며 유류판매량을 기본으로 한 하향식 방식(Tier1,2)과 이동원의 속도 및 교통량 자료를 활용한 상향식 방식(Tier 3)이 있다. 방법론에 따른 결과 분석을 위하여 분석 대상지역을 선정하였다. 선정기준은 한국교통연구원에서 수행한 지자체별 지속가능교통 평가결과에 근거하여 지속가능성 1등급 지역 중 하나인 과천시와 7등급 지역인 안성시를 대상으로 분석하였다. Tier 1 방법론을 통해 도출된 온실가스 배출량($CO_2$ 기준)은과천시의 경우 74,813ton/yr, 안성시는 584,125ton/yr로 나타났다. Tier 3 방법론 적용 결과 과천시 91,462ton/yr, 안성시 163,801ton/yr로 나타나 과천시의 경우 Tier 1 방법론보다 22.3% 과대추정 되는 결과가 도출되었다. 반면, 안성시의 경우 Tier 3 방법론을 적용하였을 때 온실가스 배출량이 3.5배가량 줄어드는 결과가 도출되었다. 따라서 본 연구를 통해 온실가스 배출량 산정 방법론에 따라 지속가능교통 지수에 의한 지자체별 등급이 다르게 평가될 수 있다는 것을 확인할 수 있었다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.1-10
• /
• 2016

OBJECTIVES : Currently, the market for carbon emissions trading has been increasing. In Korea, it is known that traffic mode rate in bike transportation is low. However, if bike transportation system is encouraged and the traffic mode rate is increased, it would be possible to reduce carbon emissions through the trading market. In this study, a practical policy to activate the bike transportation system in Korea will be proposed and verified. METHODS : Past studies regarding bike transportation system in international and domestic metropolitan cities were analyzed. Moreover, detailed reviews on recent carbon emissions trading market were performed. In particular, SWOT analysis on the bike transportation system in Korea and policy topology analysis were conducted. RESULTS : Based on the literature reviews and SWOT analysis, a new bike transportation policy was proposed. Several actual plans to adopt in Korea were proposed. In addition, a new bike transportation policy was analyzed using policy typology model, and a business model related to the cost of implementing the system and CERs were also proposed. CONCLUSIONS : It is concluded that the proposed bike transportation activation policy and several practical plans to connect CERs and a business model including bus, subway, T-money and bike riders to give some incentive were effective and reasonable. It is desired that this study will help Korea to get CERs through bike transportation activation in the future.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.397-402
• /
• 2015

SCR has been popularly approved as one of the most effective means for NOx emission control in heavy-duty and medium-duty vehicles currently. However, high urea dosing would lead to ammonia slip. And $NH_3$ sensor for vehicle emission applications has not been popularly used in real applications. This paper presents experimental studies on the diesel engine urea-SCR system by using a double NOx sensor system that is arranged in the downstream of the SCR catalyst based on ammonia cross-sensitivity. It was shown that the NOx conversion efficiency rised as $NH_3/NOx$ increases and the ammonia slip started from the $NH_3/NOx$ equal to 1.4. The increase of temperature caused high improvement of the SCR reaction rate while the space velocity had no obvious change. The ammonia slip was in advance as catalyst temperature or space velocity increase and the ammonia storage reduced as catalyst temperature or space velocity increase. The NOx real-time conversion efficiency rised as the ammonia accumulative storage increase and reached the maximum value gradually.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.628-632
• /
• 2007

The purpose of study is to confirm a acceptable range of data errors in data collecting. To examine a acceptable range of data errors, emission level is calculated for a vehicle flow and heavy vehicle percentage as a function of small-sized velocity. According to road selected, noise level of detail influence road noise calculations. It can be concluded that a vehicle flow raised an error less than 5000(veh/h) for a maximum error in emission level of 3.01dB, and the more a heavy vehicle percentage have a low value, the more emission level is a slight difference. This analysis gives insight regarding the accuracy of traffic flow data that is needed to reach a certain level of accuracy for the resulting noise level.

• 한국측량학회지
• /
• 제17권3호
• /
• pp.273-282
• /
• 1999

대기환경분야에 GSIS를 활용하기 위해서는 우선적으로 이러한 연속면적 성질을 지닌 대기오염이나 기후인 자를 비롯한 연속면(continuous surface)의 특성을 가진 환경인자의 공간분포를 도면화 할 수 있어야 한다. 이를 위해서는 몇몇의 한정된 지점에서 측정된 점관측(point observation)자료에 의존하여 전 지역의 분포를 추정해야 한다. 본 연구에서는 자동차에 의한 대기오염물질 발생현황을 실질적으로 파악하기 위한 조사ㆍ연구의 일환으로 서울시 전지역을 대상으로 실시한 서울시 교통센서스의 자동차 통행량 자료, 오염물질별 배출계수 및 GIS-T용 수치지도등의 자료들을 이용하여 오염물질 배출특성을 지역별, 항목별, 시간별로 가시화 할 수 있는 GSIS기법의 적용성을 검토하고자 하였다.

• 한국대기환경학회지
• /
• 제11권3호
• /
• pp.273-278
• /
• 1995

This study is to estimate the ventilation volume by the traffic that originated from driving automobiles for two tunnels (Kugi tunnel and Kumhwa tunnel) that adopted natural ventilation system among tunnels of Seoul, and on the basis of which, we estimated the ventilation velume at various conditions. With the result of the estimation, we will present the basic method that can be operated with the optimum condition for the ventilation system. Estimating the predicted ventilation volume in the tennel by the pollutant concentration, we used traffic volume and CO emission data by the automobile speed and CO concentration in the tunnel. And, when we estimated the traffic ventilation volume by natural and traffic ventilation force, we used traffic volume, automobile speed, tunnel area, automobile area data and so on. As the result of simple regression between predicted ventilation volume and traffic ventilation volume, we attained the regression coefficient 0.88, and achieved the relation form that predicted ventilation volume equal 0.12x traffic ventilation volume-92, 000. Using this equation, we estimated the ventilation volume to satisfy the enviromnental standards of several space, and calculated the required volume for mechanical ventilation. Incase of Kumhwa Tunnel, there is a need of mechanical ventilation all day long to satisfy air quality standard 9 ppm for 8 hours average and 10 ppm for the indoor air quality standard of public facilities.