• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.365-370
• /
• 2004

In this paper, we wish to construct a optimal traffic cycle using wire remote control. if police vehicle or ambulance suddenly enter the traffic intersection, it will increase the traffic accident. In this paper, wireless traffic light use the radio traffic control signal and research about the hardware manufacture to check special detectors on urgency vehicles may safety and rapidly enter traffic intersection. Also, this paper present a traffic signal control conditions that analyzes different traffic intersection flows in cases of saturated flows, where the real traffic volume demand is large and the capacity constraints of bottlenecks have significant effects on the flow patterns. Through computer simulation this wireless traffic light has been proven to be much more safety and efficient than fixed traffic signal light which does not considering emergency vehicles for safety escort.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.167-176
• /
• 2009

Several travel demand management schemes have been used for controlling overloaded traffics on urban area. To maximize efficiency of the travel management, traffic manager has to set target level that we try to arrive in advance, and then to find optimal variable to attain this goal. In this regard, this paper presents two travel demand management models, expressed by mathematical program, and also presents their solution algorithms. The first is to find optimal travel demand for origin-destination (OD) pair, based on average travel time between the OD pair, and the second is based on the ratio of volume over capacity on congested area. An example is given to test the models.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.111-121
• /
• 2010

DHV (Design-Hour Volume) for the estimation of number of lanes is determined by design-hour factor (K). The design-hour factor is defined as the proportion between the 30th highest hourly volume and AADT and determines the level of road planning. However, the K-factor estimated by an existing method has a problem because the hourly volumes on holiday and weekend appear in the relatively low rank in real world in spite of expected high volumes. To improve this problem, this study make use of the concept of traffic demand in estimating the design-hour factor. After the congested hourly volumes transfer to traffic hourly demand, the K-factors are estimated on urban expressways and are compared to the existing K-factors. It is perceived that the new K-factors have more realistic values due to utilizing the traffic demand. reflecting the congested flow.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.97-116
• /
• 1994

Today advanced traffic management systems are required because of a high increase in traffic demand. Accordingly, the objective of this study is to take advantage of image processing systems and present image processing methods available for collection of the data on traffic characteristics, and then to investigate the possibility of traffic flow analysis by means of comparison and analysis of measured traffic flow. Data were collected at two places of Daegu city and Kyongbu expressway by using VTR. Rear view (down stream) and frontal view (up stream) methods were employed to compare and analyze traffic characteristics including traffic volume, speed, time-headway, time-occupancy, and vehicle-length, by analysis of measured traffic flow and image processing respectively. Judging from the results obtained by this study, image processing techniques are sufficient for the analysis of traffic volume, but a frame grabber equipped with high speed processor is necessary as well, with low level system judged to be sufficient for traffic volume analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.30-40
• /
• 2010

The freeway congestion is largely generated by a mainline spillover of the exit ramp queue. So it is necessary to study for modeling of the phenomenon and applying the model. In this study, the authors evaluated applicability of the Supply-Demand model, which can express traffic flow for the freeway by applying flexibly supply and demand curves for capacity of the freeway. First the authors proposed methods processing input data required in the Supply-Demand model, such as sending & receiving functions and time-varying capacity constraints for the freeway mainline. After modeling the Supply-Demand application model, the authors applied the model to the site including congested Hongeun exit ramp in Seoul Ring-road, and improved the model by adjusting application techniques and calibrating parameters. The result of the analysis showed that the Supply-Demand model yielded a queuing pattern and queue location similar to them observed in the field data, and applicability of the Supply-Demand model was varified.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.306-310
• /
• 2004

In this paper, we consider the Ring Loading Problem with integer demand splitting (RLP). The problem is given with a ring network, in which a required traffic requirement between each selected node pair must be routed on it. Each traffic requirement can be routed in both directions on the ring network while splitting each traffic requirement in two directions only by integer is allowed. The problem is to find an optimal routing of each traffic requirement which minimizes the capacity requirement. Here, the capacity requirement is defined as the maximum of traffic loads imposed on each link on the network. We formulate the problem as an integer program. By characterizing every extreme point solution to the LP relaxation of the formulation, we show that the optimal objective value of the LP relaxation is equal to p or p+0.5, where p is a nonnegative integer. We also show that the difference between the optimal objective value of RLP and that of the LP relaxation is at most 1. Therefore, we can verify that the optimal objective value of RLP is p+1 if that of the LP relaxation is p+0.5. On the other hand, we present a strengthened LP with size polynomially bounded by the input size, which provides enough information to determine if the optimal objective value of RLP is p or p+1.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.69-78
• /
• 1999

This paper defines the reliable based route choice Principle and formulates the reliability based equilibrium traffic assignment using the Principle. The reliability is defined as the difference of travel demand and capacity using the interference theory of the system engineering. An efficient solution a1gorithm based on Frank-Wo1fe algolithm is Presented to calculate and compare the reliability based traffic assignment with conventional travel time based assignment using small and large scaled road networks. The results show that reliability based traffic assignment converges to equilibrium solution in a reasonable computing time. The equilibrium link flows between reliability and travel time based traffic assignment differ each other in the sense that reliability based assignment is assigned based on the maximum difference of travel demand and link capacity whilst travel time based is assigned on the shortest travel time.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.889-896
• /
• 2005

While a year and a half has been passed since the launch of KTX service, traffic volume of Gyung-bu High Speed Railway is still much lower than the forecasted value. This situation has been badly affecting not only Korail's financial status but also KRNA's general railway construction projects as general public responds negatively to such projects as New Ho-nam Line Construction. This paper outlines traffic volume forecasting methodologies applied to construction of Gyung-bu High Speed Railway, identifies major causes of forecasting deviations. and finally extracts problems through comparison between the forecasted results and actual traffic volume.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.109-112
• /
• 2005

In this thesis, we recommend the method for VOD service traffic modeling. By the analysis of service traffic, we verify that the process of VOD service is the POISSON process. So it is important to determine the probability of the user's existence in the system. But, because it is difficult to measure, we recommend proper using of arrival rate and service rate.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.83-91
• /
• 2011

The objective of VMS(Variable Message Sign) is to provide the traffic information downstream to drivers upstream so that they can choose their routes or expect the travel time to arrive the destination. Because there is not enough time and space to show the message, VMS message should be selected carefully. However, the message of VMS has been simply selected among the pre-designed message sets based on the priority rule of events. If the traffic demand between origin and destination is identified along the freeway, message can be selected to provide the information of a route that more drivers will use. In this study, a time sliced OD(Origin/Destination) estimation method will be developed using the detector information of the on-ramp, exit ramp, and the main lanes. And the strategy of a priority rule of message was planned.