• 디지털융복합연구
• /
• 제18권11호
• /
• pp.449-457
• /
• 2020

한국 전통도자에 적용된 식물의 시각적 표현은 우리 민족의 의식과 정서에 기반하고 있으며, 당시 사람들이 추구하던 길상(吉祥)적 염원(念願)과 벽사(辟邪)를 볼 수 있다. 이러한 상징적 표현은 도자의 형과 장식의 표현, 그리고 그들의 융합을 통해 새롭고 다채로운 의미로 확장되어왔다. 본 연구에서는 한국 전통도자에서 보이는 융합표현의 현상을 형과 형, 형과 장식, 그리고 장식과 장식으로 구분해 그것들의 특별한 의미를 분석한다. 이를 위해 한국 전통도자에서 활용된 식물의 형과 장식의 특징을 문헌적 정보를 바탕으로 고찰한다. 2장에서는 의미를 담은 형과 장식의 배경이 되는 식물을 개괄적으로 분석하고 의미를 소개한다. 3장에서는 식물들의 특징과 의미를 기반으로 형과 형, 형과 장식, 장식과 장식의 융합 형태로 구분하고 그들의 융합현상을 통해 새롭게 발현된 의미를 제시한다.

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.39-48
• /
• 2012

The first twenty-five years of scientific study within Korea on Korean traditional ceramics has been characterized as a bridging effort to understand the rich field of artistic ceramic masterpieces on one hand with analytic results gained from mounds of broken shards and kiln wastes on the other. First shard pieces were collected directly from the waste mounds, but most of the analyzed shards were provided by art historians and museum staffs directly involved in systematic excavations. The scientific study is viewed as one of many complimentary ways in learning about the multi-faceted ceramics culture, ultimately connecting human spirits and endeavors from the past to the present to the future. About 1350 pieces of analyzed shards have been so far collected and organized according to the production location and time period. From the experimental results of the analysis, the compositional and microstructural characteristics of bodies and glazes have been deduced for many kiln sites of Goryeo and Joseon dynasties. Except for a few local kilns, porcelain stone was used as body material in both dynasties. The principle of mixing a clay component with a flux material was used in Korean glazes as was in China. The clay component different from body clay was often used early on. In Gangjin a porcelain material appropriate for whiteware body was mixed for celadon glaze, and in Joseon Gwangju kilns glaze stone was chief clay material. The use of wood ash persisted in Korea even in making buncheong glazes, but in Joseon whitewares burnt lime and eventually crushed lime were used as flux material.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.61-70
• /
• 2004

Generally, ceramics are very difficult-to-cut materials because of its high strength and hardness. The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Ceramics can be machined with traditional method such as grinding and polishing. However, such processes are generally cost-expensive and have low material removal rate. Thus, in this paper, to overcome these problems. BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 5,10,15,20,25 and 30%. And, mechanical properties, R-curve behavior and machining tests are carried out to evaluate the machining properties of the manufactured machinable ceramics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.291-295
• /
• 2002

Ceramics are very difficult-to-cut materials because of its high strength and hardness. Their machining process can be characterized by cracking and brittle fracture. Generally, ceramics are machined using traditional method such as grinding and polishing. However, such processes are generally costly and have low material removal rate. In this paper, to develop machinable ceramics those have good machinability without losing their material properties, machinability evaluations are performed by applying the experimental design method. In this paper, to evaluate the machinability of the developed ceramics, various workpieces are machined on the CNC machining center, and surface roughness are measured under predefined process parameters obtained using Taguchi method. And the experimental results are investigated to derive optimum cutting parameters for the given materials.

• 한국가구학회지
• /
• 제17권1호
• /
• pp.23-32
• /
• 2006

This study was carried out to explore a new application of traditional Hanji and obtain fundamental properties for producing Hanji wallpaper by incorporating ceramics from wood and rice-husk as an interior building material. The results of properties determined were summarized as follows: The addition of ceramics in Hanji paper reduced its apparent density, but increased bulk density due to the ceramic particles distributed on the surface and inside the fiber of Hanji wallpapers. In particular, woodceramic particles were specifically distributed on the fiber surface, while particles of rice-husk ceramics were permeated into the inside surface of fibers. The density of rice-husk ceramics were greater than that of woodceramics. The physical properties of Hanji wallpapers, such as breaking strength, wet breaking strength, burst strength, tear index and folding endurance were deteriorated with the addition of ceramics. However, the addition of woodceramics in the Hanji wallpaper resulted in better strength in most cases than that of rice-husk ceramics, except tear strength. Therefore, an optimum addition level of woodceramics into the wallpaper was found to be 5% on the basis of intensity. The addition of ceramics also prolonged the combustion time because it lowered air permeability and brightness of the wallpaper.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.35-42
• /
• 2006

This study was carried out to develop a new application field of traditional Hanji and obtain the basic data for producing functional Hanji using sawdust ceramics and rice-husk ceramics as an architectural material. The results measuring water vapor permeance and water vapor absorption for using window materials and wallpapers are as follows. Hanji wallpaper has good things in controlling indoor space comfortably. Particularly, ability of controlling humidity of Hanji wallpaper affects indoor space comfort and human health. In the case indoor humidity is higher than outdoor humidity, according to the addition of ceramics, Hanji wallpapers maintain the humidity by retaining water vapor molecules in the pores of ceramics. Thus the Hanji wallpapers with ceramics, in particular rice-husk ceramics, make it superior to non-ceramics Hanji wallpapers in maintaining the humidity indoors.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.7-12
• /
• 2009

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 10 and 15%. The purpose of this study is an analysis of endmill's rake angle for appropriate tools design and manufacturing for the machinable ceramics. In this study, Experimental works are executed to measure cutting force, surface roughness, tool fracture, on different axial rake angle of endmills. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.

• 보존과학회지
• /
• 제26권3호
• /
• pp.213-228
• /
• 2010

중국 도자기에 대한 과학적 연구는 화학적 성분분석을 중심으로 18세기부터 구라파에서 지속적으로 이루어졌으며, 중국내에서는 1950년대부터 시작되었다. 반면에 한국도자기의 경우는 1980년대에 미국과 독일에서 연구가 이루어지고 한국내에서 체계적 연구는 1990년대부터 시작되었다. 이와 같은 도자기 연구는 많은 분석 결과들이 축적됨에 따라 여러 도요지들을 서로 비교하고 중국의 분석 결과와도 비교가 가능하게 되었다. 이 논문에서는 고려청자와 고려백자를 생산도요지와 발굴층위 등에 따라 각각 21그룹과 10그룹으로 나누어서, 성분결과들을 비교 관찰하였다. 각 그룹의 태토와 유약의 성분은 일반적으로 3~5편을 분석하고 그들의 분석값을 평균하였다. 비교 결과에서 한국도자기의 태토는 월주요와 경덕진요와 같은 중국 남방에서 사용되고 있는 운모-석영계의 도석으로 만든 것으로 나타나며, 유약도 중국과 유사하게 점토와 나무재, 그리고 석회석 종류의 용융재를 혼합하여 만든 것으로 추정된다. 특히, 석회석은 처음에 태워서 사용하다가 고려말기에 이르러 분말상태로 사용하는 경우가 많아지는 경향을 보인다. 월주요에서 사용한 유약은 몸체를 만든 태토를 섞은 것에 비하여 강진 청자의 유약은 백자를 만들 수 있는 점토를 사용하였기 때문에, 산화 티타늄의 함량이 현저하게 적게 나타나는 것을 알 수 있다. 이 논문의 방법과 결과들을 토대로 앞으로 이루어질 많은 발굴과 분석 자료들이 계속 축적될 수 있다면 더욱 좋은 비교 연구가 가능 할 것이다.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.15-21
• /
• 2004

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 5, 10, 15, 20, 25 and 30%. The objectives of this paper is to evaluate the fracture phenomenon of the tungsten carbide tool and the variation of surface integrity of the manufactured machinable ceramics under various cutting conditions during end mill machining With CNC machining center.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.630-634
• /
• 2014

$(Na_{0.525}K_{0.4425}Li_{0.0375})(Nb_{0.9975}Sb_{0.065}Ta_{0.0375})O_3+0.3 wt%CoO$ ceramics were fabricated as a function of CuO addition by traditional solid state sintering process in order to develop excellent lead-free piezoelectric ceramics composition. The addition of CuO in the LNKNTS composition ceramics can effectively enhance the densification of the ceramics, resulting in the oxygen vacancies as hardening effect. The excellent piezoelectric properties of electromechanical coupling factor($k{\small}_P$) of 0.378, piezoelectric constant($d_{33}$) of 152 pC/N were obtained from the 1.0 mol% CuO doped LNKNTS ceramics sintered at $1,020^{\circ}C$ for 3 h.