• 대한한의학원전학회지
• /
• 제26권2호
• /
• pp.121-132
• /
• 2013

Objective : Bambusae Caulis in Liquamen has been used by East Asian doctors who approved efficient clinical effects of it since the early stage of medical history. It is commonly used for lifestyle related diseases including stroke in recent days thanks to the increasing number of manufacturers. However, products from pharmaceutical companies as well as food companies are not classified as Bambusae Caulis in Liquamen but Bamboo vinegar. This study aims to discern disparate manufacturing process. Methods : In this study, original texts were searched to corroborate the correct method to produce Bambusae Caulis in Liquamen. It is essential to inspect the original texts thoroughly in the course of modernizing traditional knowledge. Result : Discrimination between the two substances starts from manufacturing process; Bambusae Caulis in Liquamen is made under the temperature of less then $170^{\circ}C$, containing mild fragrance and sweet taste, and the Bamboo vinegar over $170^{\circ}C$ upto $400^{\circ}C$, carrying strong smoky scent and acidness. Although some researches show conforming clinical actions of both products, still there is a possibility that closer clinical study would reveal their discrepancy. Conclusion : Current use of Bambusae vinegar needs speculation. Authenticity in proper manufacturing process can be attained through passed-on medical texts.

• Journal of Acupuncture Research
• /
• 제30권5호
• /
• pp.95-105
• /
• 2013

Objectives : The purpose of this study is to examine the preparing methods of the traditional acupuncture needle and to interpret the electromagnetic meaning intervened in them. Methods : The overall manufacturing processes of the acupuncture needles in ancient books were surveyed. And the facts that special functional activities were carried out in common in the preparing processes were detected. The reproduction tests for the detected former functional activities were followed. Results : According to the ancient medical books, the traditional acupuncture needles were treated with the magnet through the preparing processes. The reproduction tests provided the fact that the ferromagnetic iron needles treated with the magnet were enhanced their magnetisms. And major techniques of the ancient supplementation and draining can be interpreted as magnetic or induced electromagnetic actions. Conclusions : Considering the electromagnetic characteristics of human body, the magnet treated ferromagnetic iron needles of ancient era and magnetic or induced electromagnetic interpretable manipulation techniques are the historical evidences of magnetic activities of acupuncture. So modern acupuncture therapy should be understood, studied, and reinterpreted as an electromagnetic viewpoint.

• 동아시아식생활학회지
• /
• 제1권3호
• /
• pp.277-298
• /
• 1991

Review of Korean and Chinese traditional nuruk was performed on the longitudinal change of ingredients and method of each nuruk. Manufacturing process of common nuruk was that flour, wheat chaff, grinded green pea and smartweed were doughed, footpressed to make 凹 type, covered it with mugwort, lotus leaf and cocklebur leaf and suspended it with string for 60 days to get wild mold. This is named Beungkuk. Manufacturing process of Sankuk was that cooked rice or uncooked rice grain was scattered, mixed often for 30 days. Ryokuk and Hongkuk are called Sankuk.

• 산업진흥연구
• /
• 제9권2호
• /
• pp.207-221
• /
• 2024

자동차 제조업은 에너지 소비가 많고, 오염물질을 많이 배출하는 전통적인 제조업으로 공급망의 디지털 전환을 통해 환경성과를 향상시킬 필요가 있다. 본 연구에서는 공급망의 디지털전환, 공급망 동적 역량 및 기업 환경성과를 바탕으로 13개의 가설을 제시하였다. 중국 7개 지역 자동차 제조기업의 경영자 및 종업원을 대상으로 설문조사를 실시한 결과 공급망의 디지털 전환이 공급망 동적 역량의 영향을 받아, 자동차 제조기업의 환경성과를 향상시키는 데에 영향이 있는 것으로 나타났다.

• 보존과학연구
• /
• 통권29호
• /
• pp.199-220
• /
• 2008

Hobun(Oyster shell White) is a traditional material used as extender and white pigment from ancient times. The production method of it, however, has been discontinued. We have studied the traditional production method of Hobun by weathering oyster shell, which is one of the traditional ways for preparing Hobun. Reproduction study of manufacturing method of the discontinued traditional material is an important accomplishment of our research. Also this study provides solid background knowledge to stabilize the production and supply of Hobun for the cultural asset repairing materials. The result can be summarized as follows: The production process of Hobun by weathering method takes 5 steps - (1) weathering shells ${\rightarrow}$ (2) washing ${\rightarrow}$ (3) pulverization ${\rightarrow}$ (4) separating fine powder by submerging in water ${\rightarrow}$ (5) drying. The major aim in step (1) is to eliminate organic impurities. In the step (4), the fine particles smaller than $25{\mu}m$ are separated by extracting the supernatant from stirred suspension after heavy particles are submerged. Also, the soluble inorganic impurities can be eliminated through the powder submerge in 15 times water and stirring the suspension 6 hours and changing the water 3~4 times. The final products have high quality with 94.03, 0.52, 2.05 for L, a, b, less than $25{\mu}m$ particle size, fine resistance for discoloration by light and environmental pollution and good workability.

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.320-326
• /
• 2015

Purpose: Kimbugak is one of Korea's traditional snack foods made of laver. Mechanization of the manufacturing process is necessary to produce kimbugak in large quantities and standardize the products for industrialization. This study was conducted to develop a machine that can simultaneously accomplish the two processes of pasting and garnishing for manufacturing kimbugak, and test its performance. Methods: A pasting and garnishing machine was designed, and its target work efficiency was set at 720 sheets/h. The performance was tested based on the physical characteristics such as work efficiency, pasting uniformity, and garnishing uniformity. Results: With the developed technology, kimbugak could be produced up to a productive rate of 840 sheets/h on a single machine. The pasting uniformity ranged from 91.5% to 96.8%, and a garnishing uniformity of more than 90% could be obtained. Conclusions: It is expected that this approach to developing a machine with the functions of pasting and garnishing can contribute to the mechanization of the manufacturing process to produce Korean traditional foods including kimbugak in large quantities and standardize the products for industrialization.

• International Journal of Quality Innovation
• /
• 제6권3호
• /
• pp.204-215
• /
• 2005

This paper explores innovative manufacturing processes, which can be used to manufacture the national musical instrument of Trinidad and Tobago, the Musical Steel Drum or Steel Pan. The main manufacturing process used today is the manual hand-forming technique. In order to achieve more consistent and deeper formed components while maintaining the high quality of the instrument, it is proposed that the Marforming process and the Flow-forming process, an adaptation of the Spinforming process, be used more frequently in the future to replace the traditional Hand-forming method. In the traditional Spinforming technique material is pushed from the outer circumference of the metal disc to the center in progressive passes of the former. This results in a thinning of the outer region of the formed component with thickening of the center, however the opposite is required for the musical steel drum and by adapting the process the required strain distributions were achieved. Evaluation took the form of strain analyses of pre-formed steel drums and visual inspection of the quality of the surface finish. It was found that the Marformed components had the smallest range of strain values while the Spinformed components had the largest range.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.43-48
• /
• 1994

In an effort to become more competitive and cost efficient many companies have shifted from traditional job-shop production to production using group technology (GT) and cell manufacturing (CM). Cellular manufacturing is critical to implementing Just-in-Time (JIT) production which pointed out in the previous articles. and adopt the U-shaped cell which allows for entry at one end of the U and exist at the other. This paper looks at the availability of cellular manufacturing, by applying those concepts to the small and medium sized industry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.193-194
• /
• 2007

In this paper we present work done by Kodak Graphic-Communications-Group and our partners demonstrating applications where laser direct imaging could replace photolithography in display manufacturing. Such applications range from direct manufacturing (e.g. LCD color-filters) to producing “masters” where manufacturing is done by traditional printing methods (e.g. flexography, Gravure-printing).

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.