• 제목/요약/키워드: Trade Safety

검색결과 420건 처리시간 0.028초

전동기와 드라이브의 국제 규격 및 규제에 관한 현황 연구 (A Study on the International Standard and Regulation for Electric Motor and Drives)

  • 우경일;박한석;김대경;최한석;전희득
    • 전기학회논문지
    • /
    • 제63권3호
    • /
    • pp.437-443
    • /
    • 2014
  • Electric motors and drives consume the largest amount of electricity more than 40% of global electricity consumption. In addition, motors, drives and its components are included in the global high-trade products and the main driving source for industrial equipment and house appliances. Thus, International standards and regulations for their safety and efficiency are internationally being discussed and created for the protection of its citizens and energy saving. So, understanding the international standards and the regulation of each country is essential to enhance overseas market and to develop product. In this paper, on the basis of this background, status and trends of international standards and regulations are introduced for safety and efficiency of motors and the drives. Safety and efficiency of the IEC (International Electrotechical Commission) standards are introduced in the emphasis. Also, regulations are studied about the differences and trends in each county.

KC마크의 안전 불감과 과제 (Insensitivity Towards Safety and Tasks of KC Mark (Korea Certification Mark))

  • 김명열;강경식
    • 대한안전경영과학회지
    • /
    • 제18권1호
    • /
    • pp.111-118
    • /
    • 2016
  • KC Mark is one of the country's integrated legal force to the minimum mandatory certification mark system for safety. That is absolutely needed for manufacturing and sales of goods in Korea. This thesis intended to see what is prevalent for both imports and domestic products for illegal and defect and rebuild the ecosystem as soon as possible for the healthy development through public awareness. In this theses point out the seriousness of the problem based on the various kinds of press releases, data of KCA(Korea Consumer Agency), MOTIE(Ministry of Trade, Industry and Energy) and KCA(Korea Customs Service) to the problem of certification system of KC mark and propose a solution to that issue. This study is considered to make befit the nation's place in the world and sustainable development is possible about the system of certification KC. This study expect more research on this issue in order to make enhance the confidence of KC mark.

돼지고기 원산지 표시의 도움에 대한 지각도에 미치는 영향 요인 평가 (Factors Influencing on the Perception of Helpfulness of Marking the Country of Origin in Predicting the Quality and Safety of Pork)

  • 이성희;강종헌
    • 한국조리학회지
    • /
    • 제12권3호
    • /
    • pp.49-60
    • /
    • 2006
  • The purpose of this study was to measure the factors influencing on the perception of helpfulness of marking the country of origin in predicting the quality and safety of pork. A total of 239 questionnaires were completed. A multinomial logit model is specified in order to estimate which factors influence the probability that a consumer perceives the country of origin as helpful in assessing food quality and food safety. The estimations were carried out using the logistic procedure of SAS. The results are as follows. The proportional odds assumptions of models were not violated at p<0.05. The effects of age, income, children, occupation and respondents informed on the importance of the country of origin in pork quality model were statistically significant. The effects of age, children, occupation and trust on the importance of the country of origin in pork safety model were statistically significant. The results from this study could be useful in developing marketing and health promotion strategies as well as government trade policies.

  • PDF

Psychosocial Risks: Is Risk Management Strategic Enough in Business and Policy Making?

  • Langenhan, Melissa K.;Leka, Stavroula;Jain, Aditya
    • Safety and Health at Work
    • /
    • 제4권2호
    • /
    • pp.87-94
    • /
    • 2013
  • Background: In times of continuous change and volatile markets, organizations are increasingly characterized by downsizing, work intensification, and resource rationalization. This has resulted in diversification, and the emergence of newrisks within the field of occupational health and safety, with an important impact. This paper focuses on one such type of risk in the modern workplace-psychosocial risks. The current study aimed to explore stakeholder perspectives, regarding the extent to which psychosocial risks are incorporated into strategic risk management practices, at both the business and policy level. Methods: Semi-structured interviews were conducted with 14 professionals, representing employer, expert, policy maker, and trade union stakeholder perspectives. Results: It was found that the majority of organizations do not sufficiently, if at all, understand and incorporate psychosocial risks into strategic decision making, whereby the key barrier related to practical difficulties of not knowing how to manage psychosocial risks adequately. Conclusion: The study found that there is a need to close the gap between policy and practice on a number of levels. Future recommendations comprise a policy framework and infrastructure underpinned by educational initiatives, partnerships, and networks to drive a shift in attitudes toward recognizing the duality of the concept of risk (including both potential negative and positive outcomes) and moving beyond simple regulatory compliance.

Weighted sum Pareto optimization of a three dimensional passenger vehicle suspension model using NSGA-II for ride comfort and ride safety

  • Bagheri, Mohammad Reza;Mosayebi, Masoud;Mahdian, Asghar;Keshavarzi, Ahmad
    • Smart Structures and Systems
    • /
    • 제22권4호
    • /
    • pp.469-479
    • /
    • 2018
  • The present research study utilizes a multi-objective optimization method for Pareto optimization of an eight-degree of freedom full vehicle vibration model, adopting a non-dominated sorting genetic algorithm II (NSGA-II). In this research, a full set of ride comfort as well as ride safety parameters are considered as objective functions. These objective functions are divided in to two groups (ride comfort group and ride safety group) where the ones in one group are in conflict with those in the other. Also, in this research, a special optimizing technique and combinational method consisting of weighted sum method and Pareto optimization are applied to transform Pareto double-objective optimization to Pareto full-objective optimization which can simultaneously minimize all objectives. Using this technique, the full set of ride parameters of three dimensional vehicle model are minimizing simultaneously. In derived Pareto front, unique trade-off design points can selected which are non-dominated solutions of optimizing the weighted sum comfort parameters versus weighted sum safety parameters. The comparison of the obtained results with those reported in the literature, demonstrates the distinction and comprehensiveness of the results arrived in the present study.

이산화탄소 감지를 위한 4.26 ㎛ 필터용 poly-Si/SiO2 다층 박막 기반의 패브리 페로-필터 (Si/SiO2 Multilayer-based Fabry-Perot Filter for 4.26 ㎛ Filtering in Carbon Dioxide Detection)

  • 도남곤;이준엽;정동건;공성호;정대웅
    • 센서학회지
    • /
    • 제30권1호
    • /
    • pp.56-60
    • /
    • 2021
  • In this study, the relationship between the transmitted light intensity and full-width-at-half-maximum (FWHM) of a Fabry-Perot filter was investigated. The measured refractive indices and absorption coefficients of the fabricated thin films were applied to the Fabry-Perot filter via simulations using optical software. Although considerable research has been conducted on Fabry-Perot filters, this study focused on the usefulness of 4.26-㎛ infrared filtering in carbon dioxide detection. Optical analysis was performed considering the effects of the thickness, refractive indices, and number of thin films in a distributed Bragg reflector. Ultimately, a clear trade-off relationship was observed wherein the transmitted light intensity decreased as the number of multilayers increased; however, the FWHM was observed to be narrower.

농산식품 안전성에 대한 생산자의 인식 및 정책인지도 (Producers' Perceptions of Agricultural Food Safety and Policy)

  • 최정숙;권성옥;박영희;전혜경
    • 한국지역사회생활과학회지
    • /
    • 제17권3호
    • /
    • pp.55-65
    • /
    • 2006
  • Recent trends of global food production, processing, distribution and preparation under free trade circumstance are creating an increase in common' concerns about food safety. It is important that farmers improve agricultural products/food safety for satisfying consumer needs and health. Cognizant to the situation, this study was conducted to analyze how the Producers gather information, and determine their awareness about agricultural Products safety using a safety Questionnaire. The Questionnaire was given to 500 farmers who cultivate rice, fruit trees, vegetables, and other crops from September through October 2005. More than half of the producers felt concerns about the agricultural products/foods safety. Uneasiness of the producers was higher amongst those who were younger and earned a higher income. Pesticides and zoonosis (BSE AI, etc.) emerged as the main risk factors causing concerns among the greatest number of producers. Producers had a positive opinion of the effects and perception of food safety, but no opinion of the activity of government. The producers showed a high level of understanding of the Country of Origin Labeling System (88.2%), the quality certification system of agricultural and livestock products (71.9%), and the raising system of environment-friendly agriculture (72.7%). However, their level of understanding of the GAP (59.3%) and the Traceability System (22.8%) was still low. To effectively implement these policies, awareness of producers who are the beneficiaries of the above policies has to be enhanced. Therefore, the safety information should be provided at a more appropriate time and should be easier to understand.

  • PDF

The Hazard Analysis and Critical Control Point (HACCP) System and Its Implementation in an Aseptic Thermal Juice Processing Scheme: A Review

  • Min, Sea-Cheol;Min, David B.
    • Food Science and Biotechnology
    • /
    • 제15권5호
    • /
    • pp.651-663
    • /
    • 2006
  • Hazard Analysis and Critical Control Point (HACCP), a systematic process that identifies, assesses, and controls hazards, has been developed as an effective alternative to conventional end-point analysis for food safety control. The importance of HACCP has been emphasized recently due to the development of new food processing technologies and the increase in international trade demanding worldwide of food product safety. This paper provides a review of HACCP and a generic HACCP template for its implementation for aseptic processing of a juice drink.

복합운송주선업을 위한 Web기반의 해운 포워더정보시스템 설계 (Design of Web-based Ocean Forwarder Information System for Freight Forwarder)

  • 박상민;임세희;변상규;유우식;채진석;심동석
    • 대한안전경영과학회지
    • /
    • 제6권1호
    • /
    • pp.81-96
    • /
    • 2004
  • Globalization of Economic activities have increased Company's interests about International Logistics Management. Expansion of International trade depends on International Logistics which can overcome distance and time. In In-cheon, There are many small scale and minor Freight Forwarders take advantage of being linked with a port, an airport but their inefficient paper works cause raising of Logistics costs and losing of competitive power. In this study, we design a web based ocean forwarder information system for freight forwarder to solve these problems. So, this system will provide decreasing operation time, human resources, and accessing easily because of web based system, and finally decrease logistics cost and improve national competitive power.