• Structural Engineering and Mechanics
• /
• v.3 no.2
• /
• pp.193-199
• /
• 1995

Two kinds of special 3-dimensional 12-node finite elements-each one contains a traction-free planar surface-have been developed based on Hellinger-Reissner principle by assumed stress hybrid method. Example solutions have demonstrated the advantage of using these special elements for analyzing plates and solids with rectangular holes.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.1 no.1
• /
• pp.99-104
• /
• 1995

Markolf and Morris suggests that the deranged disk and torn annulus have an exellent recovery ability from the position of spine extension, where the posterior annulus is not under stress and the gel can move anterioly. McKenzie explains side gliding as a combination of rotation and side bending, his clinical studies indicate that side-gliding can gel laterally. In conclusion, the prone unilateral traction on the opposite side from the patient's pain along with the other treatment appered to have helped reduce those patient's pain. The method of treatment described in this report is suggested for Korean physical therapists who treat patients suspected of posterolateral herniated nucleus pulposus.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.812-813
• /
• 2011

This paper presents the characteristic of newly developed electrical steel and motor performance analysis for HEV/EV. This material is developed and optimized for high frequency operation to reduce the core losses in traction motors to increase fuel efficiency. Four types of electrical steel are introduced, which are optimized for high flux density (PNHF), high frequency low core loss (PNF), high punchability (PNS) and high strength (PNT) to meet different specifications from different types of traction motors. To identify the motor performance with this material, finite element analysis was used to calculate core loss as well as Ld and Lq for efficiency map. Also structure analysis was performed to calculate stress on bridge rotor.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.2
• /
• pp.481-486
• /
• 1995

Markolf and Morris suggests that the deranged disk and torn annulus have an exellent recovery ability from the position of spine extension, where the posterior annulus is not under stress and the gel can move anterioly. McKenzie explains side gliding as a combination of rotation and side bending, his clinical studies indicate that side-gliding can gel laterally. In conclusion, the prone unilateral traction on the opposite side from the patient's pain along with the other treatment appered to have helped reduce those patient's pain. The method of treatment described in this report is suggested for Korean physical therapists who treat patients suspected of posterolateral herniated nucleus pulposus.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.10a
• /
• pp.25-28
• /
• 2000

In this paper, the technology for accelerating degradation & life estimation on the traction motor was introduced with the stator form-winding sample coils of the 200 Class insulation system The accelerative degradation was performed in 10 cycles, which were composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, condition diagnosis test such as insulation resistance & polarization index, capacitance & dielectric loss and partial discharge properties were investigated in the temperature range of $20{\sim}160^{\circ}C$. Relationship between degradation conditions and diagnosis results were analyzed to find an dominative degradation factor at the end-life point

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1759-1763
• /
• 2014

In this paper, we were performed a structural analysis and durability analysis for an integral frame with an axle according to development of the electric locomotive traction motor. In terms of the structural stability, as a result of the analysis modeling with coupling conditions of beam element and an alternative element of three-dimensional, the maximum von-Mises stress of the locking screw mounting frame were similar as 50MPa and 51MPa. Also A comparison of the natural frequency and the exciting frequency while driving of the electric locomotive No. 8200, the natural frequency is 627.05Hz~856.9Hz while the exciting frequency is not more than most 30Hz or 553Hz, 1110Hz. Therefore, it is possible to avoid the resonance.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.452-454
• /
• 1999

In this paper, sample coils for stator form-wound winding of traction motor were made for the accelerative thermal degradation composed of heat, vibration, moisture and overvoltage. In progress of test periods, diagnosis tests such as insulation resistance, dielectric loss and partial discharge were investigated. Reliability and expected life were evaluated on the insulation system for 200 class traction motor considering various environmental stress.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.319-321
• /
• 1998

Some design technologies of AC traction motor for rolling stocks are presented. AC Traction motors for rolling stocks are operated in worst conditions such as frequent mechanical vibrations, compact design with limited mounting space, severe thermal stress at outside, driven with nonsinusoidal voltage waveform inverters, and so on. Therefore, design procedures must be carefully investigated in the viewpoint of theoritically and practical use. Design procedure contains, the motor size determination, electromagnetic circuit design, insulation system design, vibrations and thermal expansion of rotor bars, temperature rise, as well as output characteristics.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.6
• /
• pp.223-227
• /
• 2005

Insulation failure of traction motor stator coil depends on the continuous stress imposed on it and knowing its insulation condition is an issue of significance for proper safety operation. In this paper, application of the NN (Neural Network) as a scheme of the off-line PD (partial discharge) diagnosis method that occurs at the stator coil of a traction motor was studied. For PD data acquisition, three defective models were made; internal void discharge model, slot discharge model and surface discharge model. PD data for recognition were acquired from a PD detector. Statistical distributions and parameters were calculated to perform recognition between model discharge sources. These statistical distribution parameters are applied to classify PD sources by the NN with a good recognition rate on the discharge sources.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.93-101
• /
• 2002

In this study, the stator form-winding sample coils based on silicone resin and polyimide were made for fault prediction and reliability estimation on the C-Class(200$\^{C}$ ) insulation system of traction motors. The complex accelerative degradation was periodically performed during 10 cycles, which was composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, the condition diagnosis test such as insulation resistance '||'&'||' polarization index, capacitance '||'&'||' dielectric loss and partial discharge properties were investigated in the temperature range of 20 ∼ 160$\^{C}$. Relationship among condition diagnosis tests was analyzed to find a dominative degradation factor and an insulation state at end-life point.