• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.194-205
• /
• 1999

The prevalence of microprocessor-based controllers in automotive systems has greatly increased the need for tools which can be used to validate and test control systems over their full range of operation. The objective of this paper is to develop a real time simulator of traction control system by the methodology of using hardware-in-loop simulation based on a personal computer. By use of this simulator, the analysis of commercial electronic control units and components for TCS were performed successfully. The simulator of this research can be applied to development of more advanced control systems(suck as vehicle dynamics control system) and other automotive system.

• 대한정형도수물리치료학회지
• /
• 제25권2호
• /
• pp.1-10
• /
• 2019

Background: The purpose of this study was to determine the effects of cervical extension-traction exercise on cervical alignment, pain, and neck disability in patients with mild turtle syndrome. Methods: Thirty two outpatients with mild turtle neck syndrome were recruited and randomly divided into two groups. Participants in the experimental group was applied cervical extension-traction exercise (CETE, n=16) and in the control group applied cervical stabilization exercise (CSE, n=16) for three times a week for 4 weeks. Results: Cobb angle and Jochumsen depth were CETE showed significant difference within the group post test (p<.05). And the CETE was significantly higher than the CSE. In the pressure pain threshold, both CETE and CSE showed significant differences within post test (p<.05). And the CETE was significantly higher than the CSE. Neck disability index were significant (p<.05) in the CETE post test. There was no significant difference between the two groups. Conclusion: Our results of this study showed that applying cervical extension-traction exercise to patients with mild turtle syndrome improved cervical alignment, pain and neck dysfunction.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.125-131
• /
• 2001

본 논문은 백터제어기법을 적용한 철도차량용 1.2MVA전동차 구동시스템의 개발에 관한 것이다. 벡터제어를 위해서는 출력 전압의 크기와 위상을 순시적으로 제어해야한다. 전동차 구동시스템에서는 DC링크 단의 전압 이용률을 최대로 하기 위해 고속 운전 영역에서는 1펄스 모드를 사용한다. 따라서 고속 운전 영역에서는 토크성분 전류와 지송성분 전류를 독립적으로 술시 에어해야 하는 백터제어기법을 정용할 수 없다. 이에, 본 연구에서는 저속이 운전영역에서는 순시 토크 제어가 가능한 벡터제어를 적용하고, 고속 운전 영역에서는 슬립 주파수제어를 적용하는, 백터 제어와 스칼라 제어의 병용제어 기법을 제안하였다. 또한 운전영역에 따라 이들 두 제어방법이 부드럽게 전환되도록 하는 제어기법이 제시되었다. 제안되 제어기법을 4대의 210kW 유도전동기를 구동하는 1.2MVA 전동차 견인 구동시스템에 적용하여 그 효용성을 알아보았다.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.349-353
• /
• 2008

Purpose: There are 3 well-known surgical procedures to treat Pierre Robin sequence: tongue-lip adhesion, distraction osteogenesis of mandible, and tracheostomy. The classical tongue-lip adhesion is an effective way to keep airway. The tongue, however, becomes quite non-mobile and appears dormant until the patient could control upper airway and the adhesion can be maintained for prolonged period. Most of all, this procedure does not provide the correction of the micrognathia. Distraction osteogenesis is a good technique to correct micrognathia and to prevent tracheostomies in patients with Pierre Robin sequence. But airway keeping procedure is needed during the distraction period. The purpose of this study is to determine the usefulness of temporary tongue-lip traction during the initial period of mandibular distraction in Pierre Robin sequence patients with severe airway problems requiring operative procedure. Methods: It was a prospective study of 2 Pierre Robin sequence patients aged between 4 months and 6 months requiring surgical procedure to correct recurrent and severe pulmonary complications. Two patients underwent distraction osteogenesis of mandible. During the operation, deep one tension suture was performed to tract the tongue and lip. When the patient gained control of upper airway at the initial period of distraction and micrognathia was corrected, the traction suture was removed. Results: All patients were followed up. No patients complained severe pulmonary complications and tracheostomy could be avoided. No patients had severe pulmonary complication. The pulmonary condition of patients was good. Conclusion: In severe Pierre Robin sequence case, temporary tongue-lip traction is a good assistant method in distraction osteogenesis because this method can avoid tracheostomy.

• 한국항행학회논문지
• /
• 제24권4호
• /
• pp.280-284
• /
• 2020

현재 공기제동의 문제점을 보완하기 위한 유지보수와 환경문제, 효율성, 경제성 등을 개선하기 위하여 정지에서 고속영역까지의 전 영역에서 전기 브레이크의 모든 주행 범위와 관련된 제동력을 제시하였다. 결과적으로 는 제동력의 효율과 첨단 기술은 에너지 활용을 확장 시켰으며, 본 논문을 통하여 모든 주행 범위에서의 소음이 저감되며, 유지 보수 비용의 절감 효과가 있었다. 트랙션 모터는 인버터의 최대 전압을 제어하는 고속 운전 특성 구동을 위해 트랙션 모터의 가변 속도와 트랙션 모터의 단자 전압을 가져 와야 한다. 따라서 시뮬레이션을 통한 구동 및 브레이크 변경에 대해 연구하였다.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1297-1302
• /
• 2017

Recently, SRMs are used in automobiles for power assistant steering, accessory motion control and traction drives. Especially in the motion control and traction drives, safety and efficiency are of paramount importance. The paper describes the essential elements faced in designing and constructing driving circuits for a switched reluctance motor for automobiles. An important factor in the selection of a motor and a drive for industrial application is the cost. The switched reluctance motor(SRM) is a simple, low-cost, and robust motor suitable for variable-speed as well as servo-type applications. With relatively simple converter and control requirements, the SRM is gaining an increasing attention in the drive industry. This paper presents a modified C-dump converter for Switched Reluctance Motor (SRM) machine application in the cooling system of automobiles. The experiments are performed to verify the capability of applicate control method on 6/4 salient type SRM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.359-362
• /
• 1996

This paper describes a development of traction control algorithm to investigate dynamic behavior of 2-motor driven electric vehicle. A electric vehicle is represented by a nonlinear seven degree of freedom including accelerations of wheels, longitudinal, lateral, and yaw motions. A nonlinear control algorithm is proposed in order to enhance the driveability of the electric vehicle with torque split control system. With the proposed control algorithm, numerical simulations are performed to analyze the dynamic behavior of the electric vehicle.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.164-164
• /
• 2008

The beach-chair traction position is designed to allow the use of traction while allowing the surgeon to orient the shoulder in an upright position and convert to an open procedure, if necessary. The patient is placed in the beach-chair position under general anesthesia. A three-point shoulder holder (Arthrex, Naples, Florida) is attached to the rail of the operating table on the same side as the surgeon, whereas it is placed on the side opposite the surgeon in the lateral decubitus position. A shoulder traction and rotation sleeve (Arthrex) are affixed to the arm following the manufacturer's instructions. Positioning the thumb toward the closed side of the sleeve ensures a field for the anterior portion of the rotator cuff and prevents the tendency of the suspension apparatus to place the arm in internal rotation. The arm is maintained in 30 to 40 degree abduction and 30 to 40 degree flexion by controlling the length and height of the bar and the location of the universal clamp. The universal clamp allows multiple planes of adjustment to control abduction and forward movement of the arm. The sleeve is attached to the longitudinal traction cable using a sterile hook, and a lateral strap is secured around the proximal portion of the sleeve to the overhead traction cable to ensure a field for glenohumeral reconstruction. The use of a lateral strap permits ideal shoulder positioning for improved access to the anterior and inferior glenohumeral joint. The lateral strap can be released or removed to widen the subacromial space during subacromial decompression or rotator cuff repair. A 10-lb weight is attached to the longitudinal traction cable for an average-sized person.

• 드라이브 ㆍ 컨트롤
• /
• 제20권1호
• /
• pp.16-26
• /
• 2023

Although the upland field area of Korea is high as 44.8%, the platform optimized for the upland field is insufficient. It is necessary to develop an optimized platform for the upland field because the upland field environment is an irregular environment with many slopes. In addition, due to the characteristic of agricultural operations, the traction power and torque of the platform have to be sufficient. Therefore, in this study, a simulation model that can predict the traction power and driving torque of a crawler-type platform for the upland field was developed and validated using the specifications of the crawler platform. The simulation model was developed using Amesim (19.1, Siemens, Germany). The development of the model was conducted using the specifications of the platform. A measurement system was developed to validate the simulation model. The traction power data of the simulation model was validated with the traction force and vehicle speed. The driving torque data of the simulation model was validated with the torque of the sprocket on the crawler system. As a result of the analysis, the error between measurement and simulation results occurred within 10%, and it was determined that the traction power and driving torque prediction of the crawler platform using this model was possible.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.223-226
• /
• 2018

최근 차량 사고로부터 탑승자를 보호하기 위해서 다양한 안전 기술이 집중적으로 개발되고 있다. 본 논문에서는 잠김 방지 브레이크 시스템, 견인력 제어 시스템, 제동력 배분 시스템, 전자 주행 안정 장치, 자동 긴급 브레이크, 에어백, 좌석벨트 프리텐셔너, 능동형 헤드레스트 등 다양한 차량용 탑승자 보호 기술을 살펴보고, 각 기술의 동작원리 및 구현에 대해 설명한다.