• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.241-247
• /
• 2005

본 논문에서는 플라이휠의 저장에너지를 이용한 다이나믹 무정전 전원장치를 제안하고 동작기능을 분석하였다. 배터리를 에너지 저장요소로 사용하고 있는 기존의 무정전 전원장치에 비해 플라이휠 방식의 무정전 전원장치는 수명이 길고, 효율이 높으며, 환경공해가 거의 없으며, 크기도 작고, 특히 유지보수 비용이 현저히 작다는 장점을 갖는다. 무정전 기능뿐 아니라 전압보상 기능도 갖는 시스템에 대한 동작특성을 해석하였으며, 순간정전 후 전압이 복귀되는 시점에서의 위상변동을 신속히 추종하는 특성도 살펴보았다. 시뮬레이션과 실험을 통해서 시스템의 유용성을 검증하였다.

• 항공우주기술
• /
• 제3권2호
• /
• pp.25-33
• /
• 2004

본 논문에서는 인공위성 반작용휠의 미소진동 측정을 위한 테스트 장비와 이를 이용하여 실측한 반작용휠의 미소진동을 측정 및 분석 결과를 소개한다. 위성의 미소진동은 KISTLER dynamic platform 이라는 400Hz 이내의 3축의 힘과 3축의 토크를 동시에 측정할 수 있는 장비에 의해 측정되며 측정된 데이터는 회전 속도에 따라 3차원 주파수 분석, order tracking 등의 방법을 이용하여 분석된다. 반작용휠의 미소진동 분석 결과, 회전 속도와 비례하는 일차 성분 외에 고차 조화 성분, 구조 진동 성분, 회전 속도에 따라 고유진동수가 변하는 rocking 모드 성분 등을 관찰할 수 있었으며, 휠의 정적 및 동적 불균형은 각각 0.79gcm과 17.4gcm²으로 나타났다. 이러한 다양한 진동 성분들은 회전체의 특성, 구조물의 특성 및 베어링의 영향으로 기인한다.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.981-992
• /
• 2006

In this paper, a lateral vehicle control using the concept of control configured vehicle (CCV) is presented. The control objectives for the lateral dynamics of a vehicle include the ability to follow a chosen variable without significant motion change in other specified variables. The analysis techniques for decoupling of the aircraft motions are utilized to develop vehicle lateral control with advanced mode. Vehicle lateral dynamic is determined to have the steering input and control torque input. The additional vehicle modes are also defined to using CCV concept. We use right eigenstructure assignment techniques and command generator tracker to design a control law for an lateral vehicle dynamics. The desired eigenvectors are chosen to achieve the desired decoupling (i.e., lateral direction speed and yaw rate). The command generator tracker is used to ensure steady-state tracking of the driver's command. Finally, the developed design is utilized by using the lateral vehicle dynamic with four wheel.

• 제어로봇시스템학회논문지
• /
• 제6권3호
• /
• pp.241-247
• /
• 2000

The reference model of an MRC (model reference control) provides the desired trajectory a plant should follow and thus the design of a reference model has a significant effect on control performance. In most control systems control input to a plant has some bounds and it is preferable to make use of as large control inputs as possible within the range of no saturation. In this paper a new approach of selecting the reference model is proposed for bounded control inputs. Design variables of the reference model are determined in such a way that maximizes the performance index within the range of no saturation. Moreover this variable reference model is regularly updated during control. This scheme is verified by application to the servo motor position control system in various simulations. The responses of the MRC with a variable reference model show better tracking performance than that with a fixed reference mode. Moreover by adjusting the update interval of the reference model the control performance can be further improved.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.14-21
• /
• 2009

The demand and installation for photovoltaic system(namely, PV) has grown steadily in Korea. However, the PV system has a various economic viability according to the PV system characteristic variables such as inverter efficiency, miscellaneous power conditioning losses, azimuth and slope of PV array, PV tracking mode, and so on. The other variables are the monthly consumed electric energy and economic related factor such as initial cost, government subsidy, maintenance cost, inflation rate, energy cost escalation rate, discount rate, etc. Therefore, this study is to present economic evaluation of PV system with those concerned factors by calculating internal rate of return, year-to-positive cash flow and net present value indices.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.359-362
• /
• 2006

This study develops an automatic berthing control algorithm for ships with a bow thruster and a stern thruster as well as a rudder. A nonlinear mathematical model for low speed maneuvering of ships is used to develop a MIMO(multi-input multi-output) nonlinear control algorithm. The algorithm consists of two parts, which are forward velocity control and heading angle control. The control algorithm is designed based on the longitudinal and yaw dynamic models of ships. The desired heading angle is obtained by the so called "Line of Sight" method. An optimal control force allocation method of the rudder and the thrusters is suggested. The nonlinear control algorithms are tested by numerical simulations using MATLAB, and shows good tracking performances.

• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.192-197
• /
• 2011

This paper describes the mathematical modeling, control algorithm, system design, hardware implementation and experimental test of a Manta-type Unmanned Underwater Vehicle (MUUV). The vehicle has one thruster for longitudinal propulsion, one rudder for heading angle control and two elevators for depth control. It is equipped with a pressure sensor for measuring water depth and Doppler Velocity Log for measuring position and angle. The vehicle is controlled by an on-board PC, which runs with the Windows XP operating system. The dynamic model of 6DOF is derived including the hydrodynamic forces and moments acting on the vehicle, while the hydrodynamic coefficients related to the forces and moments are obtained from experiments or estimated numerically. We also utilized the values obtained from PMM (Planar Motion Mechanism) tests found in the previous publications for numerical simulations. Various controllers such as PID, Sliding mode, Fuzzy and $H{\infty}$ are designed for depth and heading angle control in order to compare the performance of each controller based on simulation. In addition, experimental tests are carried out in a towing tank for depth keeping and heading angle tracking.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.1002-1011
• /
• 2006

In this paper, a lateral vehicle control using the concept of control configured vehicle(CCV) is presented. The control objectives for the lateral dynamics of a vehicle include the ability to commend a chosen variable without significant motion change in other specified variables. The analysis techniques fur decoupling of the aircraft motions are utilized to develop vehicle lateral control with advanced mode. Vehicle lateral dynamic is determined to have the steering input and control torque input. The additional vehicle modes are also defined to using CCV concept. We use right eigenstructure assignment techniques and command generator tracker to design a control law for an lateral vehicle dynamics. The desired eigenvectors are chosen to achieve the desired decoupling(i.e., lateral direction speed and yaw rate). The command generator tracker is used to ensure steady-state tracking of the driver's command. Finally, the developed design is utilized by using the lateral vehicle dynamic with four wheel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.179-180
• /
• 2015

High wind penetration might cause the frequency stability problem because a wind power plant (WPP) is operating in a maximum power tracking mode to extract the maximal energy from wind and thus does not react to the system frequency variation. Therefore, the system operators encourage a WPP to participate in frequency control, which includes inertia/orl and primary control. The frequency support capability of a WPP depends on the amount of kinetic energy (KE) and reserve. This paper formulates an optimization problem to maximize KE while retaining the required reserve. The proposed optimization problem would allow wind generators (WGs) with a smaller wind speed to retaine more KE. The performance of the proposed optimization problem was investigated in a 100-MW WPP consisting of 20 units of 5-MW permanent magnet synchronous generators using an EMTP-RV simulator. The results show that the proposed optimization problem successfully improves the frequency nadir more than a conventional reserve allocation that distributes WGs proportional to the current output.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.679-690
• /
• 2003

As the rate of increase in areal density of the HDD has accelerated, dynamic characteristics of the HDD actuator need to be improved with respect to the performance of the tracking servo and shock transmission. Therefore, it is important to analyze the vibration characteristic of the HDD actuator that consists of the VCM part, E-block and pivot bearing. In this paper, vibration modes of the HDD actuator are investigated the using finite element and experimental modal analyses methods. To develop a detailed finite element model, finite element models of each components of the actuator assembly are constructed and tuned to the results of the EMA. The VCM coil is modeled as an equivalent finite element model that has an orthotropic material property using auto-model updating program. Auto-model updating program with improved sensitivity based iterative method is applied to build a detailed finite element model using the result of the EMA. A detailed finite element model of the HDD actuator is then constructed and analyzed.