• 전산구조공학
• /
• 제30권3호
• /
• pp.24-28
• /
• 2017

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.333-342
• /
• 2010

The Pseudo-Excitation Method (PEM) is applied to study the stochastic space vibration responses of train-bridge coupling system. Each vehicle is modeled as a four-wheel mass-spring-damper system with two layers of suspension system possessing 15 degrees-of- freedom. The bridge is modeled as a spatial beam element, and the track irregularity is assumed to be a uniform random process. The motion equations of the vehicle system are established based on the d'Alembertian principle, and the motion equations of the bridge system are established based on the Hamilton variational principle. Separate iteration is applied in the solution of equations. Comparisons with the Monte Carlo simulations show the effectiveness and satisfactory accuracy of the proposed method. The PSD of the 3-span simply-supported girder bridge responses, vehicle responses and wheel/rail forces are obtained. Based on the $3{\sigma}$ rule for Gaussian stochastic processes, the maximum responses of the coupling system are suggested.

• Wind and Structures
• /
• 제29권5호
• /
• pp.299-312
• /
• 2019

Due to the rugged terrain, metro lines in mountain city across numerous wide rivers and deep valleys, resulting in instability of high-pier bridge and insecurity of metro train under crosswind. Compared with the conditions of no-wind, crosswind triggers severer vibration of the dynamic system; compared with the short-pier viaduct, the high-pier viaduct has worse stability under crosswind. For these reasons, the running safety of the metro vehicle traveling on a high-pier viaduct under crosswind is analyzed to ensure the safe operation in metro lines in mountain cities. In this paper, a dynamic model of the metro vehicle-track-bridge system under crosswind is established, in which crosswind loads model considering the condition of wind zone are built. After that, the evaluation indices and the calculation parameters have been selected, moreover, the basic characteristics of the dynamic system with high-pier under crosswind are analyzed. On this basis, the response varies with vehicle speed and wind speed are calculated, then the corresponding safety zone is determined. The results indicate that, crosswind triggers drastic vibration to the metro vehicle and high-pier viaduct, which in turn causes running instability of the vehicle. The corresponding safety zone for metro vehicle traveling on the high-pier is proposed, and the metro traffic on the high-pier bridge under crosswind should not exceed the corresponding limited vehicle speed to ensure the running safety.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권2호
• /
• pp.34-39
• /
• 2016

경부 고속철 40 m 단경간 PSC 교량을 대상으로 38 자유도 KTX 동력차를 주행속도 500 km/h까지 12 단계 불규칙 궤도형상과 상호 작용력을 고려하여 해석하였다. 차량의 윤축하중과 중심회전각을 평가하기 위하여 170 m 일반도상을 교량과 조합하여 횡압과 탈선계수 그리고 윤중감소율을 허용기준과 비교하였다. 단순교와 연속교의 교량받침 최대 변위와 누적이동거리를 주행속도별로 해석하였다. PTFE 마찰판과 DP-mate의 EN-1337-2 기준의 장기마찰시험을 수행하였다. 수행된 장기마찰시험은 차세대 고속철의 증가되는 주행속도를 고려하여 개선 방안을 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1078-1083
• /
• 2008

In this paper, assessed are the stability of vehicle and track according to vertical support stiffness difference on the transition between conventional and zero-longitudinal resistance (ZLR) rail fastener on bridge. For this, the spring constants of rail fastener have been determined according to different load ranges - KTX load (with or without impact factor) and test load of EN standards - from results of laboratory test on rail pad, the stability analysis of vehicle and track has been performed according to numbers or installation length of ZLR fasteners using vertical vehicle-track coupled model to consider train-track interaction. The analysis results reveal that only the wheel load variation slightly exceed the limit value when 2 ZLR fasteners are used with spring constant determined within the EN test load range, but, in all other cases, all evaluation items are satisfied. Thus, it can be said that the stability of vehicle and track will not be degraded by ZLR fastener.

• 한국철도학회논문집
• /
• 제18권2호
• /
• pp.117-126
• /
• 2015

600km/h급 철도노반 개발은 초고속주행에 의한 동적상호작용의 예측이 어렵기 때문에 기술개발에 애로사항이 많다. 특히 교량/토공 접속부는 동적 상호작용을 포함하여 지지력, 압축, 침하, 배수, 유동 등의 영향 요소가 복합적으로 발생하는 구간으로서 접속부에서의 안정성이 확보된다면 초고속 열차용 토공노반의 안정성도 확보 가능할 것으로 예상된다. 본 논문에서는 초고속철도 접속구조개발의 기초 연구단계로서 국내 고속철도에서 적용하고 있는 접속부의 보강방안을 우선적으로 적용하여 초고속 주행시의 설계변수 영향을 해석적으로 검토하였다. 설계변수는 설계단계에서 검토 가능한 항목인 보강방안의 유무, 기하하적 형상, 재료의 강성 등이며, 분석내용은 초고속주행에 따른 궤도의 변형응답과 주행안정성을 검토하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권2호
• /
• pp.40-48
• /
• 2016

본 연구는 지진이 발생할 경우 장대레일교량에 있어 레일과 상판 간의 종방향 상호작용에 미치는 영향을 검토하기 위한 것으로, 해석모델에 여러 하중조합과 함께 지진하중을 적용함으로써 대상 철도교량 레일에서의 축방향 부가응력과 레일-상판 간 상대변위의 변화를 산출하였다. 해석 결과, 본 연구 대상 철도교량의 경우 철도시설공단에서 제시하고 있는 표준응답스펙트럼을 적용할 때 레일부가응력은 대부분의 하중조합에 대해 허용기준 내의 값을 보이고 있는 반면, 레일-상판 상대변위는 공단에서 제시하는 허용기준을 초과하고 있는 것으로 나타났다. 따라서 레일-상판 상대변위가 레일부가응력에 비해 상대적으로 더 허용기준을 만족시키기 어렵다는 것을 알 수 있었으며, 아울러 고베 대지진과 같은 큰 규모의 지진이 발생하면 레일부가응력과 레일-상판 상대변위는 허용기준을 충족시키지 못하므로 이에 대한 적절한 내진 대비가 필요하다.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.41-46
• /
• 2017

The coefficient of derailment and the rate of wheel load reduction were used as the index of train running safety that was directly affected the train derailment safety. In aspects of track, the train running safety depends on the complex interaction between wheel and rail, and the track-vehicle conditions (i.e., the curvature, cant, track system, vehicle speed and the operation conditions, etc). In this study, the relationship between the train running safety and the track curvature and vehicle speed for direct fixation concrete tracks currently employed in Korean light rapid transit was assessed by performing field tests using actual vehicles running along the service lines. The measured dynamic wheel load, lateral wheel load and lateral displacement of rail head were measured for same train running on four tested tracks under real conditions, which included curved and tangent tracks placed on the tunnel and bridge, thus increasing the train speed by approximately maximum design speed of each test site. Therefore, the measured dynamic track response was applied to the running safety analysis in order to evaluate the coefficient of derailment, the rate of wheel load reduction and the track gauge widening at each test site, and compare with the corresponding Korean train running safety standard. As the results, the lateral track response of direct fixation concrete track appeared to increase with the decreased track curvature; therefore, it was inferred that the track curvature directly affected the train running safety.

• Wind and Structures
• /
• 제19권2호
• /
• pp.145-167
• /
• 2014

Wind-vehicle-bridge (WVB) interaction can be regarded as a coupled vibration system. Aerodynamic forces and moment on vehicles and bridge decks play an important role in the vibration analysis of the coupled WVB system. High-speed vehicle motion has certain effects on the aerodynamic characteristics of a vehicle-bridge system under crosswinds, but it is not taken into account in most previous studies. In this study, a new testing system with a moving vehicle model was developed to directly measure the aerodynamic forces and moment on the vehicle and bridge deck when the vehicle model moved on the bridge deck under crosswinds in a large wind tunnel. The testing system, with a total length of 18.0 m, consisted of three main parts: vehicle-bridge model system, motion system and signal measuring system. The wind speed, vehicle speed, test objects and relative position of the vehicle to the bridge deck could be easily altered for different test cases. The aerodynamic forces and moment on the moving vehicle and bridge deck were measured utilizing the new testing system. The effects of the vehicle speed, wind yaw angle, rail track position and vehicle type on the aerodynamic characteristics of the vehicle and bridge deck were investigated. In addition, a data processing method was proposed according to the characteristics of the dynamic testing signals to determine the variations of aerodynamic forces and moment on the moving vehicle and bridge deck. Three-car and single-car models were employed as the moving rail vehicle model and road vehicle model, respectively. The results indicate that the drag and lift coefficients of the vehicle tend to increase with the increase of the vehicle speed and the decrease of the resultant wind yaw angle and that the vehicle speed has more significant effect on the aerodynamic coefficients of the single-car model than on those of the three-car model. This study also reveals that the aerodynamic coefficients of the vehicle and bridge deck are strongly influenced by the rail track positions, while the aerodynamic coefficients of the bridge deck are insensitive to the vehicle speed or resultant wind yaw angle.

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.199-219
• /
• 2015

This paper presents the non-destructive evaluation of a high-speed railway bridge using train-induced strain responses. Based on the train-track-bridge interaction analysis, the strain responses of a high-speed railway bridge under moving trains with different operation status could be calculated. The train induced strain responses could be divided into two parts: the force vibration stage and the free vibration stage. The strain-displacement relationship is analysed and used for deriving critical displacements from theoretical stain measurements at a forced vibration stage. The derived displacements would be suitable for the condition assessment of the bridge through design specifications defined indexes and would show certain limits to the practical application. Thus, the damage identification of high-speed railways, such as the stiffness degradation location, needs to be done by comparing the measured strain response under moving trains in different states because the vehicle types of high-speed railway are relatively clear and definite. The monitored strain responses at the free vibration stage, after trains pass through the bridge, would be used for identifying the strain modes. The relationship between and the degradation degree and the strain mode shapes shows certain rules for the widely used simply supported beam bridges. The numerical simulation proves simple and effective for the proposed method to locate and quantify the stiffness degradation.