• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.73-79
• /
• 1977

Heavy metals in the rice and rice paddy soil of Kyung Nam district were surveyed by use of MIBK extraction and atomic absorption spectrophotomter. Mercury was analyzed by nom-flame mercury vapor method. Rice paddy soil showed that cupper amounted to the level of $13.8{\sim}8.4ppm$, average value of 11.5ppm. Lead: $2.6{\sim}0.6ppm$, average 0.02ppm. The conentration of heavy metal $0.04{\sim}0.01ppm$, average 1.5 ppm, Zinc ; $16.1{\sim}7.2ppm$, average 11.3 ppm. Cadmium in rice were containted $2.59{\sim}0.16ppm$ of cupper, average value of 1.80 ppm. Lead: $0.2{\sim}N.D$, Zinc ; $0.11{\sim}0.60ppm$. Cadmium was shown trace at 4 places and mercury was shown trace at 6 places. Cupper showed the highest ratio of heavy metal. Levels in rice and soil whereas zinc showed the highest transmission from soil to rice.

• Advances in environmental research
• /
• v.3 no.4
• /
• pp.321-335
• /
• 2014

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.4
• /
• pp.265-270
• /
• 1993

Trace amount of heavy metals in rain waters were determined after preconcentration by coprecipitaion technique. Indium was selected as a coprecipitating reagent and concentrated heavy metals were analyzed by a conventional AA spectrometer. Two areas, Cheng-Won and Tae-Ahn, were selected and comparison. The concentrations of Pb and Cd in Cheong-Won (raural) area were 14.3 .pm. 8.0 ppb and 2.77 .pm. 5.37 ppb, respectively. These values are higher than those of Tae-Ahn, which indicates that even a rural area is polluted by a nearly industrial area (Cheong-Ju). The isotope ratios of lead in rainwaters were very similar to theos of aerosol particles.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.8-25
• /
• 2014

The aims of this study were to determine concentrations of selected metals in Asian and non-Asian dust collected in Daejeon, Korea between February 2008 and December 2008 and to estimate the pollution level. The geochemical analyses of Asian dust (AD) and Non Asian dust (NAD) show that the mean concentrations of As, Cd, Cu, Pb, Zn, Zr, Sb, Mo and S reached levels up to 16, 209, 31, 43, 81, 28, 31, 122 and 302 times higher, respectively, than those in uncontaminated Chinese desert soils. These results indicate that both AD and NAD serve as an atmospheric repository for trace and heavymetal accumulation. The the enrichment factor (EF) and pollution index (PI) show that AD and NAD were severely contaminated by S, Mo, Zr, Cd, Pb, Zn, Sb, Cu, and As. All indices for these metals showed either strong or notably high level of pollution relative to Chinese desert soil, principally due to the severe atmospheric pollution derived from anthropogenic activities in heavily industrial Chinese cities. Therefore, Mo, Cd, Zr, As, Cu, Sb, Pb, and Zn are the ones most strongly affected by anthropogenic inputs such as airborne pollutants.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.237-257
• /
• 2020

The role of nano bio-composites precursor to chitosan are innumerable and are known for having different applications in various branches of physical sciences. The application to the sensor development is relatively new, where only few literature works are available to address the specific and critical analysis of nanocomposites in the subject area. The bio-composites are potential and having greater affinity towards the heavy metals and several micro-pollutants hence, perhaps are having wider implications in the low or even trace level detection of the pollutants. The nano-composites could show good selectivity and suitability for the detection of the pollutants as they are found in the complex matrix. However, the greater challenges are associated using the bio-composites, since the biomaterials are prone to be oxidized or reduced at an applied potential and found to be a hinderance for the detection of target pollutants. In addition, the materials could proceed with a series of electrochemical reactions, which could produce different by-products in analytical applications, resulting in several complex phenomena in electrochemical processes. Therefore, this review addresses critically various aspects of an evaluation of nano bio-composite materials in the electrochemical detection of heavy metals and micro-pollutants from aqueous solutions.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1775-1780
• /
• 2003

A continuous flow system has been developed to determine trace Cu(II), Mn(II), Ni(II) and Zn(II) in a large volume of water samples by a solvent sublation technique. The mixed solution of 1,10-phenanthroline(phen) and thiocyanate ion was used as ligands for the formation of their ternary complexes. The continuous system was constructed in this laboratory with a peristaltic pump, a mini shaker, three mixing bottles and a flotation cell by connecting each part with a polyethylene tube. The flotation conditions such as the flow rate of sample solution and the injection rates of ligand, buffer and surfactant solutions have been investigated to obtain the best sublation efficiencies. Each solution flowed into the flotation cell through each polyethylene tube by the peristaltic pumps. The ternary complexes were floated and extracted into MIBK in a flotation cell of 2 L by bubbling a nitrogen gas. The absorbances of extracted analytes in MIBK were directly measured by graphite furnace-AAS. The concentrations of 1,10-phenanthroline and thiocyanate ion were $2.6\;{\times}\;10^{-3}$ M and $2.3\;{\times}\;10^{-2}$ M in the mixed solution, respectively. The pH of sample solution was adjusted to 5.0 with a buffer solution and 1%(m/v) sodium lauryl sulphate solution was added as a surfactant to support the effective flotation of the complexes. The $N_2$ gas was bubbled at 30 mL/min for 90 minutes for 20 L of sample. Reproducible results of less than 10% RSD and recoveries of 80-120% could be obtained in real samples.

• Advances in environmental research
• /
• v.2 no.2
• /
• pp.155-166
• /
• 2013

A preliminary investigation to establish the status of contamination of trace metals in the Western coast of Ghana was conducted prior to the commercial production of crude oil in the area. The study revealed the presence of heavy metals such as Pb (4.00-79.64 mg/kg), As (8.81-236 mg/kg), Cu (12.86-108.06 mg/kg), V (28.07-953.32 mg/kg), Zn (7.08-264.25 mg/kg), Cr (101.69-1366.62 mg/kg), Ni (42.41-451.43 mg/kg), Mn (16.77-1890.45mg/kg), Br (7.66-142.78 mg/kg), Ti (542.03-19960 mg/kg) and Fe (7472.88-97120 mg/kg) at six sites sampled along the coast. With the exception of Ti and Fe which showed no variation in metal concentration, the rest of the metals varied significantly among the sampled locations. Potential ecological risk of metals particularly of Co, As and Br which exhibited extreme enrichment of the sediments indicates considerable metal pollution in the studied areas. The degree of contamination is of particular concern especially to benthic biota that inhabit this environment for survival.

• YAKHAK HOEJI
• /
• v.36 no.3
• /
• pp.199-204
• /
• 1992

The trace elements in animal feed were analyzed by Inductively Coupled Plasma Mass Spectrometer (ICP-MS, VG-PlasmaQuad Co.) to find possible sources of heavy metals accumulation in rat organ. The study about spectral interference was performed by analysis of a background spectrum of ICP-MS. Recovery test using standard of Cd and Se (100 ppb) was found to be better than 90%. Twenty elements (Ca, Fe, Mg, Ti, Cr, Ni, Cu, Zn, Ba, Al, Mn, Pb, B, Ce, Bi, U, V, Cd, and W)are determined.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.2
• /
• pp.111-117
• /
• 2013

Heavy oil fly ash (HOFA) is a byproduct generated by the burning of heavy fuel oil. Chemical analysis showed that HOFA is mainly composed of unburned carbon with a significant amount of heavy metals. Due to toxicity, management of this waste poses a challenge to the industry personal. The present study investigates the possible use of HOFA as a black pigment or admixture in cement mortar aiming to produce ornamental brick. In order to investigate the change of cement mortar strength when HOFA is added, the standard compressive strength test with 50 mm cubes was performed. The results showed that the addition of 2-5 % of HOFA in cement mortar does not affect its strength. The leaching behavior of trace elements within HOFA and HOFA mixed mortar were investigated through laboratory batch leaching experiments. The results confirmed that HOFA can be utilized as a black pigment in ornamental brick, which is environmentally safe and provides good balance between color and brick properties.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.6
• /
• pp.376-385
• /
• 2001

Considerable attention has been focused in recent years upon the field of biosorption for the removal of metal ions from aqeous effluents. Compared to other technologies, the advan-tages of biosortption are the high purity of the treated waste water and the cheap raw material. Really, the first major challenge for the biosorption field is to select the most promising types of biomass. Abundant biomass types either generated as a waste by-product of large-scale industrial fermentations particularly fungi or certain metal-binding seaweeds have gained importance in re-cent years due to their natural occurrence, low cost and, of course good performance in metal biosorption. Industrial solutions commonly contain multimetal systems or several organic and in organic substances that form complexes with metals at relatively high stability forming a very complex environment. When several components are present, interference and competition phe-nomena for sorption sites occur and lead to a more complex mathematical formulation of the process. The most optimal configuration for continuous flow-biosorption seems to the packed-bed column which gets gradually from the feed to the solution exit end. Owing to the com-petitive ion exchange taking place in the column, one or more of the metals present even at trace levels may overshot the acceptable limit in the column effluent before the breakthrough point of the trargeted metal. Occurrence of 'overshoot's and impact on havey metal removal has not been analyzed enough. New trends in biosorption are discussed in this review.