• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.155-163
• /
• 2000

Osteoporosis is the consequence of an imbalance between osteoclastic and osteoblastic activity, coupled with an increased rate of bone turnover observed with menopause. Estrogen is generally considered to maintain bone mass through suppression of bone resorption. The purpose of this study was to evaluate the rat femoral trabecular change not only in the deficiency of estrogen but also in the administration of estrogen following ovariectomy(OVX). 30 female Sprague-Dawley rats were subjected to bilateral OVX or sham surgery(control). Groups of OVX were divided into 4 groups. The first group was injected daily with vehicle alone for 20 days after 20 weeks following OVX. The additional groups of OVX was injected daily with low, medium, or high doses of $17{\beta}-estradiol$(10, 25 or $50{\mu}g/kg$ BW, respectively). All rats were sacrified 23 weeks after OVX, and their femur were processed for H&E, MT stain and histomorphometry. The results were as follows; 1. In the histomorphometric analysis, the trabecular bone volume/tissue volume, trabecular thickness and trabecular seperation were respectively $31.2{\pm}8.3%$, $54.3{\pm}4.8{\mu}m$ and $280.7{\pm}16.4{\mu}m$ in vehicle treated OVX group and $48.6{\pm}7.3%$, $90.4{\pm}4.5{\mu}m$ and $126.3{\pm}5{\mu}m$ in sham operation group, and they showed statistical significance compare to control group. 2. The trabecular bone volume/tissue volume, trabecular thickness and trabecular separation were respectively $44.4{\pm}4.3%$, $109.5{\pm}12.3{\mu}m$ and $94.9{\pm}8.5{\mu}m$ in low doses of $17{\beta}-estradiol$ injected group and they showed statistical significance compare to OVX group. 3. The trabecular bone volume/tissue volume, trabecular thickness and trabecular separation were respectively $44.4{\pm}4.3%$, $109.5{\pm}12.3{\mu}m$ and $94.9{\pm}8.5{\mu}m$ in medium doses of $17{\beta}-estradiol$ injected group and they showed statistical significance compare to OVX group, but they didn't show statistical significance compare to low doses of $17{\beta}-estradiol$ injected group. 4. The trabecular bone volume/tissue volume, trabecular thickness and trabecular separation were respectively $46.4{\pm}4.5%$, $154.4{\pm}13.2{\mu}m$ and $113.7{\pm}12.8{\mu}m$ in high doses of $17{\beta}-estradiol$ injected group and they also showed statistical significance compare to OVX group, but they didn't show statistical significance compare to other experimental groups. From the above results, metaphyseal bone formation was markedly reduced in OVX rate but treatment of OVX rats with $17{\beta}-estradiol$ resulted in normalization of femur trabecular bone volume. But they didn't show statistical significance the effect of bone formation according to the dose dependency.

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.553-557
• /
• 2008

The effects of cheonggukjang and doenjang on bone mineral density, trabecular area and cortical thickness of the tibia, and serum osteocalcin level in ovariectomized rats were investigated. After 4 weeks, bone mineral density, bone trabecular area, the cortical thickness index, and serum osteocalcin level were analyzed. The cheonggukjang and doenjang diet groups showed significant prevention of ovariectomized (OVX)-related body weight gain. Whole body bone mineral density of the OVX group was significantly lower than that of the sham group, whereas the cheonggulgang and doenjang diets resulted in complete restoration of bone mineral density. Trabecular area in the proximal diaphysis and cortical thickness in the distal diaphysis of the tibia were increased significantly in the cheonggukjang and doenjang diet fed groups. The cheonggukjang and doenjang diets significantly reduced serum osteocalcin level in the OVX rats. These results suggest that cheonggukjang and doenjang might have inhibitory effects on osteoporosis, by showing accelerated bone formation in OVX rats.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.228-235
• /
• 2004

The development and proliferation of the mandibular condyle can be altered by changes in the biomechanical environment of the temporomandibular joint. The biomechanical loads were varied by feeding diets of different consistencies. The purpose of the present study was to determine whether changes of masticatory forces by feeding a soft diet can alter the trabecular bone morphology of the growing mouse mandibular condyle, by means of micro-computed tomography. Thirty-six female, 21 days old, C57BL/6 mice were randomly divided into two groups. Mice in the hard-diet control group were fed standard hard rodent pellets for 8 weeks. The soft-diet group mice were given soft ground diets for 8 weeks and their lower incisors were shortened by cutting with a wire cutter twice a week to reduce incision. After 8 weeks all animals were killed after they were weighed. Following sacrifice, the right mandibular condyle was removed. High spatial resolution tomography was done with a Skyscan Micro-CT 1072. Cross-sections were scanned and three-dimensional images were reconstructed from 2D sections. Morphometric and nonmetric parameters such as bone volume(BV), bone surface(BS), total volume(TV), bone volume fraction(BV/TV), surface to volume ratio(BS/BV), trabecular thickness(Tb. Th.), structure model index(SMI) and degree of anisotropy(DA) were directly determined by means of the software package at the micro-CT system. From directly determined indices the trabecular number(Tb. N.) and trabecular separation(Tb. Sp.) were calculated according to parallel plate model of Parfitt et al.. After micro-tomographic imaging, the samples were decalcified, dehydrated, embedded and sectioned for histological observation. The results were as follow: 1. The bone volume fraction, trabecular thickness(Tb. Th.) and trabecular number(Tb. N.) were significantly decreased in the soft-diet group compared with that of the control group (p<0.05). 2. The trabecular separation(Tb. Sp.) was significantly increased in the soft-diet group(p<0.05). 3. There was no significant differences in the surface to volume ratio(BS/BV), structure model index(SMI) and degree of anisotropy(DA) between the soft-diet group and hard-diet control group (p>0.05). 4. Histological sections showed that the thickness of the proliferative layer and total cartilage thickness were significantly reduced in the soft-diet group.

• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.227-233
• /
• 2013

Purpose: This study was performed to analyze human maxillary and mandibular trabecular bone using the data acquired from micro-computed tomography (micro-CT), and to characterize the site-specific microstructures of trabeculae. Materials and Methods: Sixty-nine cylindrical bone specimens were prepared from the mandible and maxilla. They were divided into 5 groups by region: the anterior maxilla, posterior maxilla, anterior mandible, posterior mandible, and mandibular condyle. After the specimens were scanned using a micro-CT system, three-dimensional microstructural parameters such as the percent bone volume, bone specific surface, trabecular thickness, trabecular separation, trabecular number, structure model index, and degrees of anisotropy were analyzed. Results: Among the regions other than the condylar area, the anterior mandibular region showed the highest trabecular thickness and the lowest value for the bone specific surface. On the other hand, the posterior maxilla region showed the lowest trabecular thickness and the highest value for the bone specific surface. The degree of anisotropy was lowest at the anterior mandible. The condyle showed thinner trabeculae with a more anisotropic arrangement than the other mandibular regions. Conclusion: There were microstructural differences between the regions of the maxilla and mandible. These results suggested that different mechanisms of external force might exist at each site.

• Korean Journal of Exercise Nutrition
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

[Purpose] This study compared differences in trabecular bone architecture and strength caused by jump and running exercises in rats. [Methods] Ten-week-old male Wistar rats (n=45) were randomly assigned to three body weight-matched groups: a sedentary control group (CON, n=15); a treadmill running group (RUN, n=15); and a jump exercise group (JUM, n=15). Treadmill running was performed at 25 m/min without inclination, 1 h/day, 5 days/week for 8 weeks. The jump exercise protocol comprised 10 jumps/day, 5 days/week for 8 weeks, with a jump height of 40 cm. We used microcomputed tomography to assess microarchitecture, mineralization density, and fracture load as predicted by finite element analysis (FEA) at the distal femoral metaphysis. [Results] Both jump and running exercises produced significantly higher trabecular bone mass, thickness, number, and fracture load compared to the sedentary control group. The jump and running exercises, however, showed different results in terms of the structural characteristics of trabecular bone. Jump exercises enhanced trabecular bone mass by thickening the trabeculae, while running exercises did so by increasing the trabecular number. FEA-estimated fracture load did not differ significantly between the exercise groups. [Conclusion] This study elucidated the differential effects of jump and running exercise on trabecular bone architecture in rats. The different structural changes in the trabecular bone, however, had no significant impact on trabecular bone strength.

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.295-300
• /
• 2005

We introduce an x-ray micro tomography system capable of high resolution imaging of a local region inside a small animal. By combining two kinds of projection data, one from a full field-of-view (FOV) scan of the whole body and the other from a limited FOV scan of the region of interest, we have obtained zoomed-in images of the region of interest without any contrast a nomalies. We have integrated a micro tomography system using a micro-focus x-ray source, a $1248\times1248$ flat-panel x-ray detector, and a precision scan mechanism. Using the cross-sectional images taken with the zoom-in micro tomography system, we measured trabecular thicknesses of femur bones in postmortem rats. To compensate the limited spatial resolution in the zoom-in micro tomography images, we used the fuzzy distance transform for the calculation of the trabecular thickness. To validate the trabecular thickness measurement with the zoom-in micro tomography images, we compared the measurement results with the ones obtained from the conventional micro tomography images of the extracted bone samples.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.181-189
• /
• 2013

The purpose of the present study is to investigate the effect of cortical bone on acoustic properties of trabecular bone, such as speed of sound (SOS) and normalized broadband ultrasound attenuation (nBUA), in bovine femur in vitro. Twelve trabecular bone samples and three cortical bone plates with thicknesses of 1.00, 1.47, and 2.00 mm were extracted from the proximal end of two bovine femurs. The correlations between acoustic properties and trabecular apparent bone density were also examined before and after attaching a cortical bone plate to the trabecular bone samples. SOS increased linearly with increasing thickness of the cortical plate attached to one side of ultrasonic incidence of the trabecular bone samples, whereas nBUA showed a nonlinear dependence on the thickness of the cortical plate. All the SOS (r = 0.95-0.97) and nBUA (r = 0.53-0.73) measurements with and without the cortical bone plate with various thicknesses were found to exhibit high correlations with the trabecular apparent bone density. These results imply that the acoustic properties measured in the femur with lateral cortical layers in vitro can be useful indices for the prediction of trabecular bone mineral density.

• Journal of Periodontal and Implant Science
• /
• v.47 no.1
• /
• pp.20-29
• /
• 2017

Purpose: The microstructural characteristics of trabecular bone were identified using micro-computed tomography (micro-CT), in order to develop a potential strategy for implant surface improvement to facilitate osseointegration. Methods: Alveolar bone specimens from the cadavers of 30 humans were scanned by high-resolution micro-CT and reconstructed. Volumes of interest chosen within the jaw were classified according to Hounsfield units into 4 bone quality categories. Several structural parameters were measured and statistically analyzed. Results: Alveolar bone specimens with D1 bone quality had significantly higher values for all structural parameters than the other bone quality categories, except for trabecular thickness (Tb.Th). The percentage of bone volume, trabecular separation (Tb.Sp), and trabecular number (Tb.N) varied significantly among bone quality categories. Tb.Sp varied markedly across the bone quality categories (D1: $0.59{\pm}0.22mm$, D4: $1.20{\pm}0.48mm$), whereas Tb.Th had similar values (D1: $0.30{\pm}0.08mm$, D4: $0.22{\pm}0.05mm$). Conclusions: Bone quality depended on Tb.Sp and number-that is, endosteal space architecture-rather than bone surface and Tb.Th. Regardless of bone quality, Tb.Th showed little variation. These factors should be taken into account when developing individualized implant surface topographies.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.823-830
• /
• 2010

This study was designed to examine the morphological measurement and characteristics of trabecullae based on femoral radiographic image for prediction of osteoporosis. Study subjects were 34 females (average age of 62.1 years) and 6 males (average age of 60.1 years), they were categorized into normal group and osteoporosis group in accordance with the T-score value. Measurement of the bone density of femoral bone was measured with DEXA(Dual Energy X-ray absorptiometry). ROI(Region of interests) was selected on femoral neck and trochanter. Characteristics of trabecullae was analyzed by using the skeletonization analysis of trabecular image. Morphological measurement was analyzed through femoral radiographic image in order to examine the correlation with osteoporosis. The result demonstrated statistically significant correlation between neck cortical thickness, shaft width, shaft cortical thickness, periphery, mean gray level and trabeculae area with BMD average (T-score) of femoral part. The results show that morphological measurement and characteristics of trabecullae based on femoral radiographic images for osteoporosis prediction could be effective.

• Imaging Science in Dentistry
• /
• v.52 no.4
• /
• pp.375-382
• /
• 2022

Purpose: The aim of this study was to analyze the relationships between bone density measurements obtained using cone-beam computed tomography (CBCT) and morphometric parameters of bone determined by histomorphometric analysis. Materials and Methods: In this in vivo study, 30 samples from the maxillary bones of 7 sheep were acquired using a trephine. The bone samples were returned to their original sites, and the sheep heads were imaged using CBCT. On the CBCT images, gray values were calculated. In the histomorphometric analysis, the total bone volume, the trabecular bone volume (referred to simply as bone volume), and the trabecular thickness were assessed. Results: Statistical testing showed significant correlations between CBCT gray values and total bone volume (r =0.537, P =0.002), bone volume (r =0.672, P<0.001), and trabecular thickness (r =0.692, P<0.001), as determined via the histomorphometric analysis. Conclusion: The results indicate a significant and acceptable association between CBCT gray values and bone volume, suggesting that CBCT may be used in bone densitometry.